How to install a washing machine so it doesn't jump? How to fix if the washing machine jumps during the spin cycle.

When purchasing a washing machine, buyers are immediately interested in the possibility of installing it and are willing to pay a technician for this service. But they don’t even think that they can correctly connect an automatic washing machine to the water supply on their own, and it won’t take much time and effort.

Installing a washing machine: preparation for the process

Before buying a washing machine, you need to think about options for its location. This could be installing a washing machine in the bathroom or kitchen, and there are different types of installation. In the kitchen, the washing machine can be installed under the countertop, and it will fit perfectly as a piece of furniture. In the bathroom - under the sink, but you need to know all the nuances.

After delivery and unpacking of the washing machine, it is very important to remove the four transport bolts that hold the drum, otherwise this will lead to its failure; more details can be found in the instructions.

Unscrew the transport bolts before installation. There may be 3 or 4 of them.

It is best to install the machine on a concrete floor, on a flat surface. For more slippery surfaces, it is recommended to place a rubber mat under the device.

From this video you will learn how to connect a washing machine with your own hands to the sewer and water supply.

What do we need to connect the washing machine?

To connect the washing machine with your own hands to the sewer and water supply, we will need an adjustable wrench and a gas wrench. You also need to stock up on auxiliary parts:

• Ball valve – 1 piece
• threaded adapter – 4 pcs
• cast iron tee – 1 piece
• Tape for sealing threaded connections
• Sewer pipe with a diameter of 32mm – as needed
• Sewer outlet Ø110x90

How to install a washing machine?

The installation process is performed in the following sequence:

1. Connection to sewerage.
2. Connecting the washing machine to the water supply.
3. Electrical connection.
4. Leveling the machine

Draining water from the washing machine

There are three types of connecting a washing machine to the sewer:

1. Flushing water into a toilet or bathtub.
2. Draining water into the siphon.
3. Connection to sewerage

The easiest way is to drain the water into the bathtub or sink (if the washing machine is installed in the bathroom). To do this, you need a hose through which all dirty water will drain. It must be secured so that the top is 60 cm higher than the washing machine; be sure to secure the hose using special fasteners or a rope, since under the pressure of water it can fall to the floor.

This is what a siphon looks like under the drain of a washing machine

In order not to bother with hoses, you can drain through a siphon. A siphon with a special outlet for washing machines can be bought at any specialized store or market. The outlet must be located above the siphon so that dirty water from the sewer does not enter the device. This drainage method is considered the most reliable, since water cannot spill onto the floor.

When connecting the washing machine to the sewer, you can buy an additional siphon. The drain hose is connected to the device on one side at a height of 80 cm, and on the other side it is inserted into the sewer pipe through a siphon. It is very important that the hose is straightened, otherwise draining will not occur.

Connecting an automatic washing machine to the water supply

When supplying water to the device yourself, it is important to take into account the water pressure in the pipes and the level of its contamination. Filters are installed to purify water; they will increase the service life of your equipment. The filter fits into the water pipe using a tee.

To supply water to the washing machine, you can use ready-made outlets to the drain tank or mixer, or connect it through a tee.

There are the following options for connecting a washing machine to a water supply:

• Insertion into the pipeline using a crimp coupling. This requires a ¾ inch hose. One part of the hose is connected to the machine, and the second to the valve, which we cut into the water pipe ourselves using a coupling. The coupling parts are shown in the figure. It is attached to the pipe using bolts; a hole is made in the pipe for water flow. A tap is inserted into the threaded hole, which turns on and off after each wash.
• You can connect the washing machine to the water supply in a simpler way using a tee. A flexible hose is connected to the faucet or to the water supply to the drain tank. Using a tee, the hose is connected to the mixer. This connection option is temporary, since the mixer hose must be unscrewed when washing.
• If your house has metal-plastic pipes, then a tee fitting is used to connect to the water supply. Having cut out a piece of pipe in the right place, a tee is inserted, to which a ball valve is attached.

To prevent water from leaking through the tee, seals are used. A tee, coupling, fitting, adapter, ball valve can be purchased in special stores.

You can connect the washing machine not only to cold, but also to hot water.

Connecting to hot water: how effective is it?

Sometimes, when making the connection to the water supply themselves, many people connect the machine to hot water. For this, they also use a tee for ordinary pipes, and a tee-fitting for metal-plastic ones.
When connecting to hot water, you can save energy, but at the same time you need to consider the methods of supplying hot water:

1. centralized delivery of hot water;
2. heating by local water heaters.

With a centralized supply of hot water, its temperature is +50…+70 degrees. At the initial stage of washing, the device can assume such a temperature as an emergency and stop the entire process. Therefore, if utility organizations comply with all hot water supply standards, then in this case only cold water supply is possible.

When heated by local heaters, connection to hot water is possible only if the temperature on the water heater constantly changes. When soaking laundry, the water temperature should not exceed 40 degrees; at the time of washing, select the temperature based on the degree of soiling of the laundry; rinse at the lowest temperature.

Therefore, when connecting to hot water, weigh the pros and cons.

How to properly connect a washing machine to the power supply?

Since we are talking about constant contact of the device with water, it is best to call a specialist for this purpose. But if you are confident in your abilities, you can do it yourself.

In this case, the following conditions must be taken into account:

• The washing machine should be installed near a three-wire electrical outlet.
• A grounding bus must be installed in the panel, and the wire must be reliably insulated.
• If necessary, use only a grounded extension cord.
• For the grounding cable, use a wire with a cross-section of more than 3 mm.

As you can see, knowing all the steps and rules, installing a washing machine is a simple process.

Installing an automatic washing machine by level

In order for a new washing machine to work for a long time and flawlessly, it must be installed strictly at level. First, we install the automatic washing machine in the prepared place, then take a small level and achieve the ideal location of the washing machine in the horizon line. There are support legs underneath the washing machine. By slowly twisting them you can achieve the required horizontality. In modern automatic washing machines, such legs are only available at the front, the rear legs are not adjustable, so the entire leveling process occurs only due to the front legs.

It is not recommended to place pieces of linoleum or blocks under the washing machine - this can lead to excessive vibration. A concrete floor is ideal for installing the washing machine. It is important to fix the adjusted support legs in the required position - for this, each support leg is equipped with a lock nut. If you do not fix the lock nut, then with each wash the legs will unscrew, as a result of which the level of the washing machine will be lost, and you will need to reinstall the washing machine yourself.

Installing a washing machine under the sink and countertop

In more modern room design, installing a washing machine under the bathroom sink has become widespread. This not only looks beautiful, but also saves space.

To arrange a bath like this you need:

• choose a special machine for a water lily sink with dimensions of 60 x 30 cm;
• choose a sink measuring 60 x 60 cm;
• install the sink so that it protrudes slightly above the machine, so water will not spill on the equipment;
• The drain pipe from the sink should run behind the machine, not above it.

To save money, you can buy a machine and a sink as a set.

In the kitchen, the washing machine can be hidden under the countertop or placed in a closet where it will not be visible at all. If there is very little space in the kitchen, then top-loading machines are installed, because its width is only 40 cm.

If there is enough free space, then machines with horizontal loading of laundry are installed under the tabletop.
By following all the instructions and adhering to the tips, you will know how to connect the washing machine yourself without any problems.

A new washing machine was purchased and installed. It seems to wash well and work correctly. But at some point we notice that she begins to move. By the way, this situation is also possible with an old machine, but after installation in a different place. How to get out of this situation and prevent it from moving around without permission? Let's try to figure this out, what to do, but first let's determine the reasons why this happens. After all, only by eliminating the cause can you get rid of the effect.

Why is this happening

Most often, the washing machine jumps during the spin cycle, since it is in this mode that it reaches maximum drum rotation speed. And any error during installation becomes obvious.

So, let's look at the possible reasons for this inconvenience:

• If this is a new washing machine, there is a possibility that the shipping bolts were not removed. They are used to move the device safely so that the tank is secured. Although these elements do not completely block the drum, they can interfere with its operation. As a result, machine elements may wear out faster. To check whether the shipping bolts have been removed, it is best to read the manufacturer's instructions, where everything is written.
• There may be an installation problem. It is no secret that washing machines react quite sensitively to changes in operating conditions. For example, they need a very level floor. How to check? You can use a level. You can also try shaking it with your hands. If there is a feeling of “limping”, you need to adjust the legs so that this stops.
• A rare case is a smooth, slippery floor. It is advisable to use a rubberized mat or special attachments on the legs of the machine.
• Another option that can be encountered is unbalanced laundry. If items are not evenly distributed throughout the drum, the unit may wobble. In this case, you need to pause the washing machine, wait, open and spread the laundry more evenly or divide it in half. Then we turn on the device again and test it.

If none of the suggested reasons apply to your case, it may be a breakdown.

Technical reasons

Now, here are the main breakdowns that can cause the washing machine to jump during the spin cycle:

• Damper or shock absorber failure. This means that it is worn out. These elements are designed to dampen vibrations that occur at high drum speeds. Improper loading of laundry or overload can contribute to their wear. During the spin cycle, you may also hear the sound of the shock absorbers hitting the body. For proper operation of the machine, replacement of elements is necessary.
• The springs are broken. This is possible as a result of their wear. As a result of loss of elasticity, the springs on which the drum is attached may fail. Springs need to be changed in pairs.
• The counterweight is faulty. It may collapse or its fastening may be damaged. The counterweight also dampens vibrations to keep the machine stable. The product can be made of plastic or concrete. To eliminate the breakdown, you need to replace either the counterweight or its fastening.
• The bearing has broken. If constantly exposed to moisture, the bearing may fail. This is accompanied by a characteristic grinding sound of metal. Such a breakdown can harm other components of the washing machine. To fix this, the bearing needs to be replaced.

Of course, it is often difficult to eliminate such causes on your own. What to do? Seek help from specialists. They will be able to diagnose the device, accurately determine the breakdown, and perform repair work. Then during the spin cycle the machine will stop jumping.

Alternative

But the question arises, is it possible to do anything with your own hands, at least temporarily, to get rid of this phenomenon? Let's try to give practical advice on what to do:

• the washing machine must stand on a level surface; do not install it on smooth tiles, as shown in the photo;
• first the device must be leveled, then the legs must be secured; instead of a level, you can use a container of water or try to shake the car in different directions, identifying the problem corner or side;
• There is a modern solution - an anti-vibration mat designed for installation specifically under a washing machine; it reduces noise, reduces vibration;
• Even if the device is set up perfectly, you should not neglect the rules described in the instructions from the manufacturer: it cannot be overloaded with laundry, for example, if the machine is designed for 5 kilograms of laundry, you cannot load six or more - breakdown is guaranteed.

If you are tired of washing by hand and decide to purchase an automatic machine, then it is important to consider that one purchase is not enough to immediately start using the equipment. To save money and not have to pay for the installation of equipment, try installing it yourself, using the rules for installing a washing machine. But first, check with the sellers whether the warranty on this household unit is lost if you install it yourself. If the warranty remains valid, then you can safely carry out the installation yourself, having first read our article.

Correct installation of the washing machine

The process of connecting a washing machine with your own hands is not technically difficult, but quite responsible. It is important to consider that the probability of electrical breakdown in a washing machine is several times higher than in a dishwasher. Therefore, for safe and long-term operation of the machine, it is necessary to properly prepare its workplace.

This can be done either independently or with the help of specialists, because the right choice depends not only on your desire and skill. Basically it all comes down to grounding.

Reputable trading organizations often include the cost of installation in the price of the product. It seems to be good, because the premium itself is not large (since the business is on stream). But there are several nuances:

1. Reputable companies sell modern, expensive models, but if you want to buy a budget option, you won’t find it there.
2. Traders do not deal with protective grounding equipment, since it must be equipped in advance. If it is not available, the company refuses to install it. As a result, you lose the premium and the guarantee, because the installation rules for a washing machine of any model clearly stipulate that operation of the unit without grounding or protective devices is unacceptable.

Important! Based on these factors, before you choose, buy and proceed to installing household appliances yourself, check in advance for the presence of grounding. If it is missing, provide it yourself. On our portal of useful tips in a separate post, we told.

Installation steps

In order for the washing machine to serve for a long time, you must follow the rules for installing the washing machine and do everything step by step. We will immediately determine and mark the list of steps that you need to go through. Studying the proposed detailed instructions will allow you not only to learn all the rules for installing a washing machine, but to understand them and carry out everything correctly and quickly.

Stage No. 1 - preparation

1. Inspect the purchased equipment. If you ordered home delivery when purchasing equipment, do not rush to sign the courier delivery form. This is one of the first rules for installing a washing machine. Proceed as follows:
   • Ask the couriers to unpack the washing machine.
   • Carefully check the outer covering for dents or scratches.
   • Lightly shake the machine from side to side, and if you hear strange noises and knocking inside the machine, ask to replace the unit.
   • If you don’t like something, please immediately notify the couriers. Do not sign the receipt until all problems are resolved, because you spent a lot of money on the purchase.
2. Remove all shipping parts. Start dismantling all transportation parts: blocks, brackets, bolts. Read the instructions in advance to identify all shipping parts, because if you turn on the unit without dismantling, you are guaranteed to break the machine.
3. Inspect the installation site. We hope that you have determined in advance the location of the washing machine, because all measurements are taken both in height and width, and all preparatory work must be done before purchase. They include achieving the following conditions:
   • The surface under the machine must be hard (reinforced concrete), any bulges and dents - both on the surface of the walls and the floor - are prohibited. Detailed tips from our separate publication will help you.
   • The equipment should be at least 2-3 cm from the wall. Since it vibrates during operation, the rules for installing a washing machine strictly prohibit placing the unit close to the wall.
4. Place the machine in the prepared area using a level. To ensure the machine is level and level, use a level. Pay attention to the special supports that are located at the bottom of the household appliances - they are adjustable. Fix each leg at the required height using a special lock nut. Tighten it well so that the legs do not unravel during use.

Important! In new models of devices, such supports are located only at the front of the unit.

Stage No. 2 - Connecting the device to the water supply

Almost all washing machines are connected to cold water. If there is already an outlet for the washing machine at the installation site of the unit, then no difficulties will arise. If such an outlet is not provided, then you will have to make all the connections yourself.

Important! For iron pipes you will need a welding machine, and for plastic pipes you will need a soldering iron. If you have neither one nor the other, then purchase a crimp elbow coupling. It is produced for different pipe diameters. This outlet can be installed on both plastic and iron pipes.

You can purchase a coupling outlet at any hardware store or construction market. You will need a 15mm or slightly larger elbow coupling, depending on the diameter of your pipes.

To make your own connection to the water supply, purchase the following parts:

• Tee.
• Valve.
• Adapter from ½" thread to ¾" thread.
• PTFE sealing tape.

Put all the parts together, and when the assembly is assembled:

1. Cut the water pipe.
2. Insert the tee.
3. Attach the adapter and hose from the machine to the valve.

Important! In the event of an emergency leak, the valve will allow you to disconnect the washing machine from the water supply without shutting off the water supply itself.

During installation, use rubber pads and bolts for tie and girth.

Stage No. 3 - connection to the sewer

The rules for installing a washing machine involve not only connecting it to a water supply to supply water during the wash cycle. It is also necessary to design a system for removing the waste volume of liquid - through the sewer system.

To connect to the sewer main, prepare the following tools and materials:

• Tee 50 mm.
• Branch with a diameter of 50 mm and a length of 40 cm.
• Coupling.
• Fastening clamp.
• Rubber cuff.
• Air valve 50 mm.

Important! In the room where the unit will be located, it is necessary to ensure free access of the drain hose to the drain point - the correct installation of the washing machine will depend on this.

After completing this work:

1. Using a hacksaw, make a 12 cm entrance for the pipe in this place.
2. Insert a 50 mm tee and a coupling into the resulting hole.
3. Install the plastic pipes so that they can be moved freely from side to side to install the tee and coupling.

Important! Pay special attention to the sewer riser: in the bathroom the riser is 10 cm, but in the kitchen it is 2 times less.

Stage No. 4 - connecting to the power grid

The most difficult stage of work, which is suggested by the rules for installing a washing machine, is connecting it to the electrical network. Here you need to be extremely careful.

Important! The energy consumption of the washing machine is approximately 2.5 kW. Therefore, the room in which the unit is located is considered dangerous, since it contains very high electrical voltage.

Before starting work, you need to study the structure of the machine and prepare additional components. Take the following information into account:

1. The newest machines feature grounding and double insulation to improve the safety of automatic machines.
2. To connect the washing machine to the electrical network, you must have a special socket with a built-in grounding contact.

Important! Such sockets are jokingly called “Euro-sockets” because of their high quality, because old sockets are designed for a current of only 6A, while new ones freely conduct a current of 16A.

1. It is better to choose a socket made of ceramic material, since plastic models are unsafe.
2. Install the socket as close to the washing machine as possible, since the unit's cord is 1.5 m long.
3. Do not ignore safety rules and choose a high-quality outlet that has a grounding contact

Important! All extension cords, adapters, and tees significantly reduce protection against a surge of electrical power and increase the risk of fire, and can also cause a short circuit.

Currently new, since this is where the washing machine is most often located. But do not forget that it is in the bathroom that there is high humidity and this can have serious consequences.

Important! To reduce the risk of electric shock, install an RCD. It is capable of de-energizing an electrical circuit during power surges and emergency situations.

Stage No. 5 - test run of the unit

After installing the equipment, perform a test run of the device. Add washing powder to clean the machine from factory grease and small debris, start the washing mode. At this time, pay special attention to the following points:

• How the water is poured.
• How quickly the water heats up.
• How the machine spins.
• Is the draining performed correctly?

Important! If everything works “like clockwork,” then you have done the installation correctly and you can start operating your household appliances.

• You should not overpay for a hot water valve and connect the unit to a hot water supply, because such a connection can cause a lot of problems when washing delicate items.
• To reduce noise and vibration in the washing machine, use rubber stands.
• When installing a washing machine, do not use an inconvenient drain in the bathtub or sink using the standard drain hook. This method has a lot of disadvantages: when the unit is running, you will not be able to use the sink or bathtub; in addition, the siphons of sinks and bathtubs often become clogged, and the water may overflow.
• To prevent sewer water from entering the machine, secure the drain hose approximately 60-80 cm above the outlet into the sewer.
• The washing machine is equipped with a wire with a Euro plug, which means that when connecting, be sure to buy a Euro socket that has a third contact for connecting the ground wire. Sometimes such an outlet is included when purchasing equipment.

Almost everyone who uses a washing machine knows about its habit of jumping up and moving out of its place during the spin process. This article will discuss the causes of the phenomenon and methods of preventing them.

Let's look at the reasons first. They can be divided into two groups:

• factors causing vibration of the washing machine;
• factors that allow a vibrating machine to move across the floor.

Why does the washing machine jump?

The first reason for strong machine vibrations may be undismantled transport bolts. They firmly fix the washing machine tank inside the case so as not to damage it during transportation. Before starting work, bolts and other fixing elements must be removed. It is strictly prohibited to operate the machine with them.

The next reason for vibration in the washing machine is uneven distribution of things in the tank. If you start the car with an empty tank, it will not vibrate. The same thing will happen if you distribute things perfectly evenly - in an even layer around the entire circumference of the tank. In reality, such a distribution is impossible to achieve; even those evenly distributed at the beginning are mixed during the washing process.

Faulty tank suspension and support bearings. Loosening of the counterweight.

The purpose of the system of springs, dampers and counterweight is to make the natural frequency of the tank much lower than the frequency of its rotation. This reduces the amplitude of vibrations and the amount of vibration transmitted to the machine body.

To better understand the content of the previous paragraph, remember: at the beginning of the spin cycle, the body of the loaded machine sways more strongly, and then, with an increase in the rotation speed of the tank, the swaying turns into a slight trembling or, with the correct distribution of the laundry, practically disappears.

Swing the tank - after that it should make no more than one oscillation and stop. Otherwise, the shock absorbers are faulty and must be replaced.

Open the casing of the machine, inspect the elastic elements - metal ones should not have deformations, rubber ones should not have tears or cracks. Defective parts must be replaced! Check the counterweight fastening - if it is loose, tighten the nuts.

Faulty bearings. There should be no squeaks or knocks when the machine is operating. Rotate the tank by hand and rock it from side to side. If you detect squeaking or beating, replace the faulty parts.

Correct installation of the washing machine

First requirement for installation - horizontal floor. When deviating from horizontal, the vibrating machine will slide in the direction of the slope. If the floor is not ideal, you need to build some kind of podium that creates a horizontal surface for the car. At the same time, it itself should not slide on the floor surface.

Second requirement– horizontality of the machine itself. Or verticality. It depends on what is chosen as the criterion: the top plane must be strictly horizontal, any side edge must be vertical.

Why is this necessary? Even with the most careful distribution of things, they will move during the washing process and create a beating when the tank rotates quickly. In an unevenly parked machine, the beats will deviate from the calculated ones and, as a result of the uneven load on the supports, can cause displacement.

Is the impact of deviation significant? It’s better not to analyze it, but simply level the car. This is not such a difficult operation.

How to level a car? What will be needed for adjustment?

Before starting work, prepare a level approximately 1 meter long. No longer needed. If there is no such long one, we will take what is available. But we must keep in mind that the shorter the level, the less accuracy.

You will also need two open-end wrenches. The size must match the adjusting nuts on the machine legs.

Step-by-step instructions for installing a washing machine

Checking the platform for horizontality, on which the device will stand. In fact, it is not the horizontality of the entire platform that is important, but the plane passing through the spots on which the legs of the machine will rest.

Using a level, we check the horizontality of the site along both diagonals. If horizontality is maintained here, we check along two adjacent sides. If everything is in order here, we place the car with its feet on the proven platforms. If the floor is not horizontal in any directions, we place stands on low places, achieving horizontality in all directions.

Stands can be made from any flat and hard material. It is recommended to stick a thin sheet of rubber on the side in contact with the floor. Its purpose will be described below.

Now we place the washing machine on the platform or on stands. By adjusting the height of the legs, we achieve horizontality of the upper surface. We check the correct installation of the verticality of the side ribs.

If everything is fine, tighten the locking nuts on the adjusting screws of the legs and check again whether the vertical-horizontal alignment has been disturbed during locking.

Now try to rock the car left and right and diagonally. If it doesn’t sway—not almost, but doesn’t sway at all—then the car is aligned correctly.

But there is one more nuance. As already noted, it is almost impossible to completely eliminate vibrations, so there is always the possibility of the washing machine leaving its rightful place.

Remember when they used to put a sheet of rubber on the footrests? This is so that during small vibrations they do not slip on the floor and do not allow the car to move.

Find a rectangular sheet of rubber 1–1.5 cm thick, and about 5 cm larger than the size of the machine. The hardness should be such that the legs will penetrate it by about half the thickness. Place it on a horizontal surface under the car, and the likelihood of it leaving will be reduced to zero.

Tips for operating the machine aimed at reducing vibration.

Do not overload the machine. The suspension system is designed to work with a certain load. Excess will lead to excessive vibrations, and in the long term to premature failure of components.

Before starting, distribute things evenly around the circumference of the drum. There are machines that can do this on their own, but still help them - artificial intelligence is not that smart yet.

If your machine is a top-loader, you can keep something heavy on it, such as a laundry basket. This will increase resistance to vibration.

Place the machine at a distance of at least 5 cm from the walls so that in an emergency it does not damage them or itself.

Conclusion

At the end, we will briefly list what was discussed in the article:

• Do not forget Remove transport bolts;
• The machine must be parked horizontal surfaces;
• The car must be parked strictly vertically;
• Place a rubber mat under the legs;
• Evenly distribute things around the circumference of the drum;
• Don't overload car;
• Provide a gap between the wall and the machine not less than 5 cm;
• Attention! Never use a faulty machine. If an elastic element breaks or a bearing breaks while running, the damage can reach such proportions that the extra washed shirt will turn out to be gold.

Installing a washing machine is not only about the correct connection to communications, but also about leveling it relative to the floor. Few people pay attention to this issue, thinking that the washing machine will work anyway. In fact, there is a reason for this, and we will figure out why you need to level the machine and how to do it correctly.

Alignment instructions

Having chosen a place for installation, unscrewing it from the washing machine, you can begin installing it. First, the equipment is connected to communications, because all the hoses are connected from the back and it will be inconvenient to get to them if the equipment is pushed against the wall. Once the machine is connected and in place, you can begin leveling it.

Before installation, check the evenness of the floor itself; it should not have a strong difference, protrusions or holes; if this is found, then it will be very difficult to level the washing machine. You need to level the floor first.

In order to level the position of the washing machine, you just need to adjust the height of the legs. These legs are found in all washing machines. In some models, only two legs are adjustable, while in others, all four are adjustable. We do the following:

1. Using the wrench that comes with the washing machine, you need to loosen the locknuts on the legs.
2. Screw in all the legs until they stop; if there is a need for the machine to stand higher, then unscrew them to the desired height and visually achieve a level position.
   

   If the machine tilts in one direction, then you need to unscrew the leg on the side where the machine tilts.

3. Now place the spirit level on the top cover and look at the air bubble to see if it is strictly in the middle. If the level shows a deviation, then you need to tighten the front legs.
4. Next, we shift the level perpendicular to the initial position, and level the machine horizontally, twisting the other pair of legs.
5. Be sure to check that the side wall is level and level. To do this, apply the level to the front or side wall, as shown in the figure.

Adjustment of the legs continues until the washing machine is stable, and the level shows a strictly horizontal position.

When finished, be sure to secure the locknuts on the legs so that they do not stray from the desired level. Sometimes, in order to achieve a stable position, you do not need to twist the leg, but move the machine slightly to the right or left, forward or backward. In general, in order to install the machine perfectly correctly, you need to be patient; it is not always possible to do it quickly. That is why experts recommend installing the washing machine on a tiled floor or a floor with a cement screed.

However, even a properly installed washing machine can become misaligned over time. What does this come from? It’s simple, firstly, the machine can move due to constant vibrations, and secondly, the soil on which the house is built can “move”, which means the level of the building also shifts.

Why do this?

A natural question arises: why even level the machine then? Despite various factors, this must be done. After all, an incorrectly installed machine will vibrate excessively and sometimes even jump. Excessive vibration of the drum and the entire washing machine leads to faster wear of parts and the equipment breaks down.

The most common problems caused by vibration are:

• the plastic tank cracks;
• the tiles in the room on the wall crack from the impacts of a vibrating machine;
• the car “moves out” from its place;
• bearings wear out.

To install the machine correctly and prevent it from jumping, some users, based on their experience, recommend using rubber cups under the legs. They are mounted on the floor and reduce machine vibration.

So, you can level the washing machine yourself. If you have no desire to do such work or do not have the tool for this, then call a specialist so that it does not jump later. But just do not leave the machine in an unstable position!