How to clean an acrylic bath? Features of choice and subsequent care

Today, many consumers in the process of renovating the bathroom refuse steel and cast iron bathtubs, choosing lighter practical models made of acrylic. Such a bath has many advantages, but it is important to know all the subtleties of care. It is quite simple to figure out how to clean an acrylic bathtub and how not to spoil the coating, you just need to pay attention to the advice of professionals. But first you need to understand what an acrylic bath is.

Acrylic bath: some information

For the production of acrylic bathtubs, a special material is used - sanitary acrylic Strong enough and durable, acrylic has long remained an expensive raw material. For example, it was used only for prosthetics. But progress has led to cheaper production and now any user can put good plumbing at home. In order to choose a means for washing acrylic bathtubs and figure out how to wash an acrylic bathtub, and what should be avoided, you need to know the following:

1. Bathtubs are extruded and cast.
2. The extruded material does not hold its shape well enough and is additionally reinforced with fiberglass or epoxy resins. Installation of such an accessory is carried out only on a base (frame) made of metal or moisture-resistant plywood.
3. Acrylic cast at a price slightly more expensive than extruded, but it has greater strength. Such a bath holds its shape well, and is much more resistant to chemicals, so it is easier to choose an acrylic bath cleaner.

The shapes and sizes of accessories are presented in a wide variety, and many bathtubs allow you to set the backlight, equip the bowl with hydromassage units, ozonizers and other pleasant additions.

Advantages and disadvantages of acrylic bathtubs

The benefits of plumbing include qualities such as:

• high thermal insulation properties;
• being a chemically inert material, acrylic does not corrode and therefore it is only important to choose a cleaning agent for acrylic bathtubs in order to keep plumbing in good shape;
• any acrylic bath is easy enough to clean. Therefore, if there is no acrylic bath cleaner at home, try simply rinsing the bowl with water, in most cases this is enough;
• disinfection of acrylic baths is required much less frequently than any other. The material has a natural ability to resist the growth of bacteria and fungi on the surface of the bath, which is very important in a warm and humid room atmosphere.

Important! The acrylic bathtub is light in weight and therefore any home craftsman will do just fine with the replacement of furniture.

Disadvantages of an acrylic bath:

• fragility under mechanical action;
• the appearance of scratches when using abrasives (which is why acrylic bath cleaners are available in the form of gels or soft powders);
• the possibility of losing the "presentation" from exposure to boiling water.

Important! Do not soak laundry in an acrylic bath using bleach or other strong chemicals. Such a procedure, as well as the wrong choice of detergent for acrylic bathtubs, will shorten the service life.

Acrylic bath care

Despite the fact that the material is one of the best, it is necessary to take care of the bathroom. Conventional acrylic bath cleaners are only suitable if they do not contain harsh chemicals. If you don’t know how to wash an acrylic bath, take any universal washing liquid that does not contain abrasive particles and does not contain bleach or other compounds.

What does not "love" an acrylic bath:

1. washing powder and abrasive substances;
2. compounds of ammonia, bleach, formaldehyde;
3. brushes with a metallized surface and "dry" cleaning.

The question of how to wash an acrylic bath is not the most difficult. The surface of the material is very smooth, so it is quite easy to clean: after taking the procedure, it is enough to rinse the bowl with water at room temperature and wipe it dry. If you need a more thorough cleaning, you need to pick up special detergents for acrylic bathtubs and use a soft sponge to wash the surface of the bowl.

Choosing what you can, many users prefer to choose separately products for washing, polishing, cleaning water scale and disinfecting an accessory. But manufacturers offer a detergent for acrylic bathtubs that can cope with all possible contaminants. For buyers who do not yet know how to clean an acrylic bathtub, it is useful to familiarize yourself with some of the available tools:

1. Acrylan is a simple and catchy name. Meanwhile, the cleaner is considered powerful enough and works with all types of pollution. The long-term popularity of "acrylane" is due to the ease of use and ease of removal of residues from the surface. How to clean an acrylic bathtub using "acrylane": apply the product from the sprayer to the surface of the coating and immediately wipe it with a soft sponge. So cleaning an acrylic bathtub with “acrylane” allows you to immediately remove soap residue, mold, limescale and even rust (if any). Meanwhile, the product is so soft that it practically does not spoil the surface layer.

Attention! All acrylic bath cleaners can cause allergic reactions. Therefore, be sure to wear gloves before use.

1. Rawak is a line of home chemistry. If you choose how to wash an acrylic bathtub, be sure to pay attention to the recommendations: each package contains instructions on the purpose of household chemicals. One of the advantages of household chemicals of this line is its economy and ability to cope with particularly difficult cases: lime deposits, renewal of the protective layer, elimination of grease, scale and other substances.

Advice! Ravak has prepared for sale a product for the simultaneous disinfection of the bath and restoration of the top layer of the coating. It is worth paying attention to the line if you want to buy an acrylic bath gel, the quality of which is much higher than the cost.

1. Tim Profi is a company that produces non-abrasive acrylic bath care products. If you are looking for the best way to wash the coating, take any gel! In addition to the fact that the composition cleans the surface well, it is also simply washed off with water, leaving behind a shine and a strong protective film that is completely harmless to humans.
2. Kopla is a reputable manufacturer that has been delivering high quality products to the market for years. Choose how to wash an acrylic bathroom, but do not spend a lot of money - pay attention to this line. Polishing, repairing minor scratches - all this can be done if Acrylic Polish is at hand.

How to clean the bath with any of the listed products can be found in the instructions.

Folk remedies for cleaning the bath: affordable and cheap

Cleaning an acrylic bath with folk remedies is also available:

• Vinegar or citric acid works great with water stone. Only vinegar should be no higher than 7%. So, fill the bath with water (temperature not higher than 25 degrees). Pour 1.5 liters of vinegar (solution) or pour a pack of citric acid, mix everything with a ladle and leave overnight. Then rinse everything with clean water, wipe the bath dry and admire the perfect whiteness.

Advice! If the stone deposits are severe enough, leave a solution of water with vinegar or acid for 12 hours. But not more!

• How to clean rust? Everything is very simple:
  • rub the stains with baking soda and water (1/1), wash off after 10 minutes;
  • prepare a composition of borax and table vinegar (1/1), apply on a soft cloth and wipe the corrosion sites until the rusty streaks completely disappear;
  • 2 parts salt dissolved in 1 part turpentine will remove the most stubborn stains.

Advice! And if you don’t trust folk remedies and don’t know how to wash rust, take Akrilan or Ravak gel in the store - these products will wash away stains without the slightest trace.

The better to clean the bath from limescale, it's up to you, but do not forget about the precautions:

1. Hand gloves are a must.
2. Test products on a small area before applying to the entire surface.
3. Face mask (in case of possible allergic reactions to household chemicals).
4. Thorough rinsing of any product is a must.
5. Rinse only with cool water, otherwise the top layer may be damaged.

But it is not enough to know how to clean and wash the bath, it is necessary to disinfect from time to time.

Disinfection of acrylic bathtubs

Even material such as acrylic accumulates germs over time, and regular washing does not always cope with the destruction of bacteria. Now every housewife knows how to clean a plastic bathtub, but how can you wash the coating and disinfect it at the same time? Here both improvised means and household chemicals come to the rescue. What means to clean the bath:

1. special compositions from Tim Profi, Ravak and other companies;
2. a normal chlorine solution of 7% will give the desired result.

The procedure should always be the same: fill the bath with water (not higher than 20 degrees Celsius), pour in the composition and leave for 10-20 minutes. After washing the entire surface with a hose, wipe dry and ventilate the room.

Important! The disinfection procedure should be carried out at least once a year, but not more than once every 3-4 months!

You now know how and by what means to wash the bulk bath, it remains only to choose the appropriate option and use it at home. Do not forget about simple compositions that are affordable: an ordinary soapy dishwashing solution will cope with pollution no worse than the most expensive product. The main thing is that the liquid does not contain sand or other abrasives.

Finally

Acrylic bathtubs have long and firmly entered the life of a modern buyer. These are easy-care, durable and lightweight accessories, available both in price options and ideal in the selection of color variety and shapes. In addition, the thermal conductivity of acrylic is less than metal, and this is a direct financial savings. Therefore, it is very important to know how to wash or clean a plastic bath, otherwise you can cause irreparable damage to the coating and it will have to be restored. And this operation is quite expensive.

Advice! If you come across a new product or want to know how to wash a plastic bathtub from non-standard stains, you should look at user reviews. As a rule, any problem is solved simply and quickly, you just need to spend quite a bit of time.