How to wash an acrylic bath at home: TOP 5 ways to clean, which brushes and sponges to use

Often, housewives are faced with the problem of how to wash an acrylic bath at home? The walls and bottom are sensitive to abrasive substances, so a product chosen at random will not work. The purpose of the article is to talk about the basic rules and methods of cleaning, to give practical advice and recommendations:

• characteristics of cleaning products, their features;
• cleaning options - what are the main differences;
• Tips for taking care of and extending the life of your bathtub.

Acrylic is a wear-resistant material, a type of plastic derived from a group of synthetic derivatives of one of the unsaturated organic acids.

What you need to know about the characteristics of acrylic bathtubs before cleaning them?

Before answering the question of how and how to wash an acrylic bath, let's talk about the material of manufacture. Acrylic has a dirt-repellent effect: microorganisms, bacteria and fungi do not develop in the bath. The material is durable and impact resistant. A noticeable minus is that it is easily scratched and subject to wear.

The main difference is exposure to abrasive and chemically active components. Like plastic, substances with high alkalinity or acidity lead to degradation of the structure, and abrasives scratch the surface, leaving deep grooves.

When washing, it is important to be careful. Do not buy abrasive compounds, pastes with ammonia, chlorine, acids and alkalis. Powdered products are harmful, leaving damage and scratches. Brushes (metal and hard bristles) are contraindicated for use.

Which brushes and sponges to use

For cleaning use soft cloths or sponges. Use and tissue napkins. They are moistened in special solutions (we will talk about them later). After washing, it is wiped dry and polished.

If there is no opportunity to buy a special sponge, use rags with soft pile, for example, from microfiber. If necessary, use a regular cloth - the main thing is that there are no abrasive agents on the surface.

How to clean an acrylic bath at home: TOP 5 ways

For you, we have selected several options for how to clean an acrylic bath at home:

• detergent;
• lemon acid solution;
• vinegar;
• soda;
• toothpaste.

Detergents

An adequate and simple way is the use of special detergents. Their cost rarely exceeds reasonable limits. For proper selection, make sure that there are no abrasives. Often on the packaging of goods indicate the composition, or make special notes.

Acrylic bath cleaner used for small and large cleaning volumes. Spots that appear are removed with:

• cif- for baths, sinks, tiles and toilets. The composition does not contain abrasives, which is safe for acrylic. An acceptable price and a variety of types of composition (spray, paste, cream) make it a popular product among buyers. After cleaning, a film appears that protects it from further formation of limescale.
• Acrylan- foam for bathtubs and showers. When using, leave only until completely dry, without rinsing.
• Bass- Cleaning agent, used daily. Sold in liquid form.
• Team Pro- an environmentally friendly product, helps to fight unpleasant odors, is effective for severe pollution.
• Cinderella- a popular substance, emits a pungent odor, therefore, when spraying (sold as a spray), wear gloves and a special mask.
• Chister- composition for quick removal of dirt, promotes the decomposition of divorces and fatty contaminants. Consists of a polymer that protects against fungi.

In addition to those listed, allowed Use of the following is at your own risk:

• Sarma;
• SanClean;
• Luxus professional;
• L. O. C. Plus;
• Cillit;
• Acryl-Net;
• Star-Acrylat;
• Triton;
• RAVA K;
• Panny.

Citric acid solution

Citric acid refers to organic acids with a relatively high pH - an indicator of the solution. Materials perfectly clean off plaque, grease and other contaminants. Organic acid is especially effective on ordinary substances, therefore it is easy to clean off fat with its help. In its pure form, it adversely affects acrylic, because mix into solution:

1. ⅔ fill with warm water;
2. Pour out half a liter of acid;
3. Stir the consistency and leave overnight;

The method is effective, but aggressive towards acrylic, and it is not recommended to carry it out more often than 0.5 years.

After standing for about 12 hours, the solution descends. It is worth stirring citric acid more thoroughly than vinegar - completely dissolve it for further precipitation. At the end, the structure is washed with a stream of water from the shower and wiped with a soft cloth. Rub for extra shine.

Apple vinegar

A practical substance, but it does not always have a positive effect on acrylic. The main feature is a low pH and high acidity. For the material, this factor is critical, especially in the presence of scratches. You must work quickly and accurately. The recommended method is to moisten a cloth abundantly in the solution, attach it to the pollution and pour water over it.

We recommend using the method at least once every six months.

For severe pollution:

• Prepare 9% vinegar in an amount of 1 liter;
• Fill two-thirds with hot water;
• Pour out the vinegar;
• Wait for the night;
• Rinse and wipe

Soda

Plaque removes ordinary soda. The composition has a high alkaline environment that breaks down fats and strong compounds. In most products, it is present in the form of compounds or in the usual form. There are two types: food and calcined.

Use the method every 3-5 months.

Baking soda is a weak alkali, soda ash is strong, with a powerful abrasive effect. Use only baking soda.

• Pour 2-3 tablespoons of baking soda into a bowl;
• Fill with a glass of water;
• Dampen the soft side of the sponge with the solution;
• Apply the mixture by blotting rather than rubbing;
• Rinse with water after 15 minutes and clean with a cloth.

Never use undiluted baking soda! It has a strong abrasive effect and will damage the case.

If you need to leave the surface in its original form, take distilled or filtered water. In some cities, tap water contains a large amount of calcium, which reacts with soda, which forms fine crumbs, similar to sand. Using water will get rid of it. The advice is also relevant for other cleaning methods associated with the use of chemically active substances.

Toothpaste

Acrylic came to plumbing from dentistry - it was used to line denture frames and make crowns, so cleaning the bathtub with toothpaste is quite acceptable.

The procedure should not be carried out more than once every two months.

Buy non-abrasive paste. The manufacturer may not indicate this on the packaging. Abrasive particles are like small grains of sand that clean plaque from teeth, but they will greatly damage the surface of the bath. Before use, squeeze a small amount of paste onto your finger and rub it - the sand is immediately noticeable.

• Apply the paste to a sponge or cloth;
• Wipe dirty surface;
• Clean with water;
• Grate to shine

Video: how to wash an acrylic bath

The video below provides detailed tips on how to wash an acrylic bath.

Consider the main ways to clean an acrylic bath:

Contraindications: what not to use when cleaning

A few words about how you can not clean an acrylic bath at home. We do not recommend using:

• Acetone- corrodes plastic, contributes to the appearance of holes.
• Abrasives- spoil the surface, leaving scratches and reducing the thickness of the enamel.
• A mixture of several components- creates the opposite effect, scratching the walls.

The appearance of acetone in the room should be completely excluded. The element is chemically active and acts as a solvent. Enough 10-20 ml for a dent on the surface of the structure.

Rinse off chemicals with cold water. High temperature increases the rate of reaction and damage to the surface will occur more quickly.

Detergent compatibility with acrylic surface

Is it possible to wash an acrylic bathtub with domestos or a mixture of substances? It is undesirable to mix with:

• Formaldehyde- they are not compatible with acrylic.
• Chlorine- its use forms pores, shortening the life of the product.
• Acetone, ammonia- corrode the walls.

Domestos, Sanox, Pemolux and Selit contain hydrochloric acid that destroys protection. Initially, it is bleached, but after it absorbs plaque, it gets dirty faster. Therefore, such detergents cannot be used.

White disinfection

An acrylic bath is a way to forget about the fungus forever, but it is not perfect either. The fungus does not appear on the material, but easily multiplies on plaque, fats and other organic substances with nutritious microflora. It is necessary to prevent the long appearance of pollution, and if they appear, periodically carry out a complete disinfection.

Fill the tub with water at room temperature;

• Add 2 liters of whiteness (7%);
• Do not touch for 10-15 minutes;
• Rinse off the water and dial again;
• Remove the remaining whiteness and drain the water;
• Wipe dry with a cloth.

Rules for proper operation

The bath does not require serious maintenance, but it is still necessary to follow the rules.

1. Periodic bringing plumbing in a decent condition in 5 minutes - after water procedures rinse with clean water. Acrylic does not absorb dirt, so this washing is enough.
2. Wipe down bath after use sponge with soapy water. Then dry to avoid streaks.
3. To remove scratches, there are restoration kits- They are sold in hardware stores.