How to close the pipes in the bathroom: 10 best ways.

Hiding pipes means making the bathroom a cozy and modern room for relaxation, rest, and hygiene procedures.

The easiest way to solve the question is how to close the pipes in the bathroom with plastic panels - this is an affordable and functional material.

The easiest ways to mask pipes

• Mosaic. An exclusive solution, how to disguise the pipes in the bathroom, is simply to paste over them with mosaics to match the color of the tiles on the walls and, thereby, make a spectacular decor element out of it. This method is only suitable for wide sewer pipes.

• Stucco, polyurethane tubes. To solve the problem of how to hide the pipes in the bathroom in an aristocratic style, you can drape them with polyurethane stucco.
  Such a lightweight material does not require special installation techniques, and its variety allows you to adapt to any style.
  This successful decorative element is a universal decoration, and in case of a pipe leak, it can be easily removed. The material is easily cut with a hacksaw. This option is suitable for vertical pipes.

• Roller blinds in the bathroom. How to seal the pipes in the bathroom? Plumbing roller shutters are an excellent aesthetic element of bathroom decor in a modern style (modern, high-tech, etc.).
  In addition, they do not take up precious space and allow in emergency cases to get to the communications hidden behind them in a matter of seconds. The specialist will qualitatively install them, equipping them with a mechanical or manual drive.

• Metal lattices. Sparkling chrome grilles to match the same faucets and other plumbing details will perfectly decorate a trendy high-tech bathtub, so this way will be a great solution.
  They are mounted on a metal frame or directly to the pipes. Here is an excellent solution to the issue, how to remove the pipes in the bathroom so that they become its decoration.

• false walls. Graceful and invisible. they will be an excellent solution to the problem, but, most importantly, they will hide several pipes at once, which no other disguise is able to do.
  At the same time, the bathroom space will inevitably decrease.
  However, there is no alternative in this case. Pipes in the bathroom how to hide: either the comfort and beauty of the bathroom, or the bare rough numerous pipes, as in the basement. Such a major solution to the problem, how to sew up pipes in the bathroom, will give comfort and aesthetics to the room where we start and end our day.

Note!

Facing and sewing pipes reduces their noise during operation. However, if the pipes in the bathroom are buzzing - how to solve the problem quickly, special tools will help.

For example, insulation on pipes will not only reduce noise, but also extend their service life, protecting them from moisture and deformation of joints.

Masking pipes with plastic

Plastic coating is the most suitable material for the bathroom. It does not deform from moisture and temperature, it is easy to clean, it always looks bright and modern.

But, most importantly, it can be securely and without much difficulty attached to pipes and walls. And its most diverse imitations of wood, stucco and even metal are suitable for a bathroom in any style. Therefore, only plastic solves the issue of how to close the pipes in the bathroom, invariably in their favor.

We will need a pencil, a tape measure, a hacksaw for metal with a 1 mm blade, nails, self-tapping screws or a stapler, a hammer, silicone glue, plastic and plastic guide bars for the frame. Although the frame can be made of metal or wood.

Such closure of pipes in the bathroom takes place in a certain sequence.

• We fix the guide bars on the wall perpendicular to the future plastic panels, checking the level.

Frame installation

• With a hacksaw we cut off the plastic parts for sheathing the frame. At the same time, we maintain its decorative pattern.
• Finally, we attach the box panels to the frame with self-tapping screws, stapler staples or nails.
• For reliability, we lubricate the attachment points with silicone sealant, which will not let moisture into the joints.

We fix plastic panels, successfully solving the problem - how to close pipes in the bathroom

Locker masks vertical pipes

How to hide vertical pipes mounted in a niche or on the wall surface in the bathroom? You can simply disguise them with a locker.

Instruction

• Choose a cabinet according to the size.
• Attach a frame or cabinet hinges to the wall.
• Cut holes for pipes on the top and bottom sides of the cabinet.
• Attach the cabinet to a frame or hang it on hinges.

Collapsible tile construction

Any pipes in the bathroom can be closed, making them invisible, using tiles, the same as wall cladding. And collapsible structures on pipes are not a whim, but an urgent need in case of leakage and emergency repairs.

For its device you will need the following materials and tools:

• metal profiles
• Drill with drill bits
• Tile
• plastic corners
• self-tapping screws
• Tile cutter or hacksaw.

Instructions: how to seal bathroom pipes with tiles.

• We mount the frame of metal profiles.
• Cut the tile to the size of the frame.
• With special pen drills, we drill holes in the tile at the points of docking with the frame.
• We fix the tiles on the frame with self-tapping screws and install plastic corners.

Masking pipes with a wooden box

You will need:

• boards 10-20 mm thick;
• nails, hammer;
• tape measure, pencil;
• drill, hacksaw;
• wooden corks;
• tile, tile adhesive.

Instructions: sealing pipes in the bathroom with boards.

• Board 1. Determine the width of the box: measure the distance from the front side of the pipe to the wall, add 2 cm. Saw off the board.
• Board 2. The length of this board is equal to the height of the room.
• Board 3. Place board 2 on the pipe and measure the distance to the wall, taking into account that board 2 will cover board 3 in order to securely fasten both boards with nails. Cut out board 3.
• Join boards 2 and 3 with nails in four places.
• If necessary, drill a hole in board 2 (eg for a hose outlet).
• Drilling the wall is a necessary condition to remove the pipes in the bathroom. Drill a little obliquely 3-4 holes of 40 mm at an equal distance, indent 1 cm from the corner of the bathroom. Drive wooden plugs into the resulting holes.
• Draw lines on the wall from the middle of the corks - this will help you immediately get into them with a nail.
• If the box is installed above the toilet, turn off the water, unscrew the hose, put the box against the wall, and then thread the hose through the special hole and screw it on.
• Nail the box, hammering nails exactly into the plugs.

• On wood, you can stick tiles or mosaics.

Moisture-resistant drywall, plywood, chipboard will facilitate the sewing of the box.

Painting pipes in the bathroom

How to paint the pipes in the bathroom so that there is no room for corrosion, and the result is preserved for a long time even with high humidity in the bathroom? The right choice of materials and competent preparatory work are important in this process.

For painting you will need:

• oil or water-based paint;
• anti-corrosion primer;
• flat brush (flute);
• rags;
• gloves;
• spatula, building hair dryer (preferably);
• sandpaper.

Instruction

• Thoroughly clean the pipes of old paint. It is best to heat the surface of the metal pipe with a blow dryer and remove all layers of old paint. You can remove the coating with a spatula. Then you need to sand the entire pipe with sandpaper, removing paint residue and rust. And, of course, clean the dust after the work done.
• Carry out further work only on a cold, dry surface, so turn off the water supply until the paint is completely dry.
• Treat the surface of the pipe with an anti-corrosion primer - this will significantly slow down the destruction of the metal under the influence of humidity in the room.
• Paint from pipe joints always drips onto the floor, so make sure it doesn't get dirty.

Note! Anti-corrosion enamel combines wear-resistant enamel, anti-corrosion primer and rust converter, and is ideal for bathroom pipes.

• First paint the back and hard-to-reach places, leaving no smudges or gaps. Vertical pipes are painted from top to bottom.
  Take very little paint on the brush, make small strokes. Even if you plan to cover the pipes in the bathroom with a box or cabinet, paint them in the color of the walls - this is an important stylistic touch.

Coat pipes for hot water baths with a special paint - enamel for radiators.

• After the first layer has dried, cover the pipe with another one for a thorough and more even painting. This will finally solve the problem of how to disguise the pipes in the bathroom.

Browsing through various photos and videos of pipe masking techniques will help you find the best option for you.