What is the most profitable way to heat a house? Tips and thoughts on how to heat a private house What is the most profitable way to heat a house?

Many people would like to buy housing outside the city. However, when building a private house, various problems arise. One of them is how to heat a country house. Most often, there is no possibility of connecting to central heating on a plot of land. This means that you will have to think about what type of autonomous heating to use.

Ten years ago, every home owner tried to connect to the gas supply in order to heat the room with gas. Now the situation has changed. Alternative ways to heat a building have emerged. Prices for conventional coolants are constantly rising. Space heating costs have not just increased, they have increased significantly.

Modern owners are armed with both old “grandfather’s” and the most advanced heating technologies.

After the end of the heating season, owners of private houses calculate the cost of heating their home. Many people think about how to change the heating system, because there is an alternative. We will describe several options for heating private buildings.

Wood stove heating

If the house is built far from gas mains or you don’t want to pay for expensive coolant, you can install a wood heating system. This option is ideal from an environmental point of view and does not harm the health of residents. How does a wood heating stove work?

The operating principle of this design is simple and clear. You buy a stove, put wood in it, and light it. The wood burns and heats the stove equipment. The stove gives off heat and the air in the room warms up.

Despite the seemingly primitive design, this heating option has a number of advantages:

• the oven heats up quickly;
• there is no need to buy and install pipes, radiators, pumps;
• the design is reliable, designed for long-term use, and is difficult to damage;
• Firewood can be purchased inexpensively.

Modern heating stoves bear little resemblance to the well-known potbelly stoves. The design of the furnace is designed so that the installation gives off a lot of heat and can operate for a long time on one load.

The structure of a boiler for wood.

A boiler can be integrated into a wood heating system. When choosing a boiler, it is better to choose a pyrolysis type design. Heat will be generated as a result of combustion of pyrolysis gases. This type of boiler equipment can function without electricity.

How does a solid fuel boiler work? At high temperatures and in the absence of oxygen, the burning fuel decomposes into generator gas and solid waste. In this case, it is possible to achieve maximum heat transfer from fuel combustion.

Now about the disadvantages of this type of heating of buildings:

• the furnace installation is quite large, you will have to think about where to install it; the equipment weighs a lot, so you won’t be able to install the stove yourself;
• near the house you will have to provide a covered room for firewood; it is important that the supply of wood is sufficient for the heating period;
• combustion products if the stove device is used incorrectly can be hazardous to health;
• when heating with wood, you will have to provide a chimney;
• the stove will heat the room unevenly.

Using coal

Many private houses are located far from the gas pipe. Buying firewood in some regions is more difficult than buying coal. You can purchase equipment that runs on solid fuel. Boilers designed to burn coal have sensors to regulate the heating temperature. The use of coal will reduce the amount of harmful substances resulting from combustion.

When choosing firewood or coal, you should decide in advance where and at what prices you will purchase fuel.

Solid fuel boilers consist of a furnace, in which the coal combustion process takes place, a heat exchanger, where the coal is heated, and a grate. The heat exchanger can be made of cast iron or steel. Depending on this, you can find cast iron or steel boilers on the market. Which material is preferable? Steel boilers are slightly cheaper. Why? A cast iron boiler will last longer. As for reliability, these structures are difficult to damage.

The advantages of coal stoves include durability and high heat transfer. The heating system does not require electricity. It is clear that coal will have to be purchased in advance and a room for its storage will have to be provided.

Using electricity

We have already explained how best to heat a country house when there is no gas or electricity. If the building is connected to electricity, electricity can be used for heating. The building will be heated not by electricity, but by hot water. And electricity will heat the water.

How to arrange such a heating system? First of all, you should buy a boiler in which the water will be heated. Electric boilers can be designed for different powers and have one or more circuits. If the system has one circuit, then the water is heated only to heat the house. When there is a second circuit, water can be heated for the bathroom or kitchen. Sometimes two boilers are installed in parallel. In summer one of them can be turned off. The second will heat water for domestic needs.

Types of boilers

For residential buildings, you can purchase wall-mounted and floor-mounted electric boilers. The latter have greater weight and size. Therefore, they are installed only on a horizontal surface.

Water (sometimes antifreeze) enters the boiler. Here electrical energy is converted into thermal energy. The liquid heats up and expands. The water pressure increases, the liquid moves independently through the pipes to the heating radiators. The radiators heat up and heat the building. The water cools and returns to the boiler to be heated. The system has a closed loop.

In some cases, it is possible to install a boiler with a forced circulation system. To do this, you will need an additional pump and expansion tank.

If a water heating system is not installed, but the building has electricity, other heating options can be considered. Nowadays you can buy various types of heaters that operate using electricity. Oil radiators are most often used. They consume little electricity and are safe to use.

Infrared heaters are also used indoors. But they can only warm certain areas of the room. This type of heating will save electricity. This type of heating is often used in dachas.

Infrared emitters aroused mistrust a couple of years ago. Now the situation is exactly the opposite. It turned out that this type of radiation does not pose a health threat. Moreover, these rays help cope with colds.

Precautionary measures

When heating buildings with a heater, you need to take basic precautions:

• Do not dry wet clothes on the heater;
• make sure that the wire does not lie on flammable objects;
• try not to use extension cords that are too long;
• Do not leave the heater on overnight.

If you heat a building with wood (coal), you should also adhere to the following rules:

• There should be no flammable substances near the hot stove;
• near the stove door the floor should be made of an iron plate; if sparks fall on linoleum or wood, this will lead to a fire;
• As a result of combustion, hazardous substances are formed; working ventilation is needed so that combustion products can leave the building.

What is the most profitable way to heat a house? - a question that every developer of a private residential building asks. And this is not surprising, because utilities are constantly becoming more expensive, and the market offers more and more new types of energy resources. How not to make a mistake with your choice and choose a truly “budget” option for yourself? The answer is simple: weigh all the advantages and disadvantages of all energy sources popular today and choose the most optimal one for yourself. And we will help you with this, taking as an example an ordinary residential building with an area of ​​200 square meters.

Gas.

Gas is the most common source of heat in private residential buildings today. It is practically devoid of disadvantages (it has only one - possible absence in some areas) with a whole list of advantages:

1. automatic boiler operation;
2. many modes and settings that allow you to heat your home as efficiently as possible;
3. high thermal conductivity of the fuel at a low price;
4. low cooling rate of pipes.

If in numbers, then gas heating has the following characteristics:

• thermal conductivity – 8000 kcal for each unit of measurement (m3);
• average boiler efficiency – 92%;
• tariff (as of 02/01/2016) – 5.64 rubles. for each unit of measurement (m3);
• the average consumption for a house of 200 “squares” for the entire heating period (228 days) is 4877 units (m3);
• the cost of heating the premises for the entire heating period (for a house of 200 sq. m.) is about 27.5 thousand rubles.

Electricity.

Despite the fact that kW of electricity is currently inexpensive in our country, heating a house with electricity is a bad idea and here’s why: the operation of any electrical equipment, especially heating equipment, requires large powers, which, firstly, requires this capability from the power supply lines, and secondly, it makes the counter spin at high speed, which ultimately results in a “tidy” sum.

For clarity, let’s take the same house of 200 “squares”. On average, during the heating season it burns 40904 kW/h. Let's multiply this number by the tariff (3.84 rubles for each unit of measurement) and get 157 thousand rubles.- 5.7 times more than what would have to be paid if the house had gas heating.

Although, of course, not everything is so sad. Electric heating also has its positive aspects:

• automatic operating mode;
• safety - no risk of explosion or gas leakage;
• ease of installation;
• minimal costs for operating the equipment.

Firewood.

Due to the fact that firewood can be made from different types of trees and, accordingly, have different efficiency, it would be wrong to talk about them in general terms. Therefore, as an example, let’s consider one of the best and most affordable options – birch firewood with 40 percent humidity.

For a standard heating season for central Russia (228 days), 45 cubic meters of such firewood will be required. We multiply them by the average cost of a cubic meter. (2000 rub.) and get the final 90 thousand rubles.

Less than the electric version, but 3 times more than the gas version.

What are the pros and cons of solid fuel heating?

• relative efficiency;
• energy availability;
• structural simplicity and reliability of boilers operating on solid fuels.

• the need for constant monitoring (you need to add firewood to the boiler 2-3 times a day, otherwise it will become hot);
• low (compared to the above) boiler efficiency - 60%;
• the need for a special building for storing firewood.

Coal.

At its core, the use of coal as an energy carrier is the same as solid fuel heating, only slightly cheaper and with slightly different characteristics:

• thermal conductivity – 5000 kcal for each unit of measurement (kg);
• average boiler efficiency – 60%;
• tariff (as of 02/01/2016) – 6 rubles. for each unit of measurement (kg);
• the average consumption for a house of 200 “squares” for the entire heating period (228 days) is 11965 units (kg);
• heating costs for the entire heating period (for a house of 200 sq. m.) - about 72 thousand rubles.

The pros and cons of this option are similar to those stated above (in the “firewood” section).

The more profitable it is to heat a house: conclusions.

Based on the foregoing, if there is a central gas main, it is most profitable to heat a private house with natural gas. If this has not been done in your area, you can give your preference to solid fuel: coal or firewood. The latter option will be especially beneficial if you have the opportunity to prepare them yourself for free (or for a symbolic price).

We recommend using electricity as a heating source only in case of seasonal use of the house, for example, as a summer house in the warm season; in all other cases, such heating will cost you very much.

Video.

There are places on the map of our homeland where gas supply is unavailable. In this case, alternative heat sources are used. What are the methods and options for heating a country house without gas?

Furnaces

Wood and coal are an effective heating method for rural areas. They have long been used for heating village houses. The advantages of this option are available raw materials at low prices. Disadvantages - the need to regularly maintain the fire, free space for storing firewood, the need to purchase and install a stove, boiler, and other consumables.

Electric heating

Electric heating has a number of advantages and disadvantages. Economical heating of a private house without gas is only possible with proper design and installation of equipment.

Note. To determine how effective the technology is for a particular facility, it is necessary to carry out preliminary calculations of heating and resource consumption according to SNiP standards.

The advantages of the method include: minimal installation costs, no need for a chimney or boiler room. When heating rooms in this way, carbon monoxide is not produced, and there is no risk of harmful emissions if the system breaks down. Despite all the advantages of the technology, it cannot be said that the method is the best way to heat a house without gas.

What is known about the disadvantages. Electricity costs vary by region. The option may not be economically viable. An important drawback is complete dependence on power sources. When the power goes out, the system stops heating the house.

Alternative energy sources

Heat pump

The equipment allows you to obtain low-grade heat from air, soil, rocks and reservoirs. The technology has been used in Europe for decades.

The advantages of this option are free heat sources. Using technology allows you to reduce heating costs. For every 2-3 kW of electricity spent on the operation of the heat pump, up to 6 kW of thermal energy comes out. Savings are especially relevant with the regular increase in tariffs that is observed in the housing and communal services industry.

And yet, it cannot be said that this is the best option for heating a house without gas and electricity. An important disadvantage of the technology is the high cost of equipment. The cost of a heat pump is from 100 to 400 thousand rubles. Another unpleasant feature of the equipment is a decrease in operating efficiency at temperatures falling below -10º C. In addition, the area for recharging the equipment cannot be planted with plants, and its area must be several times larger than the size of the building itself.

Solar collectors

The equipment operates autonomously. This is a big advantage over dependent technologies. The collector converts solar energy into thermal energy. This is one of the best ways to heat a house cheaply without gas. You will not have to pay during the operation of the equipment.

Disadvantages of technology

1. high cost of the collector: $500-1000;
2. heating water only up to 60º C;
3. periodic replacement of the storage tank;
4. inability to provide 100% heat.

Note. A complete transition to heating a house without gas and electricity using a collector is impossible. The equipment is used as an additional heat source to reduce heating costs by 40-60%. With the onset of cold weather or in windy weather, you will additionally need a water pump to disperse the water in the pipes. When the climate worsens, the collector stops working at full capacity.

Water heating

Popular technology allows you to effectively heat the premises of a private home. Are you considering how to heat your house if there is no gas? Take a closer look at water heating. Heating bills may turn out to be small, however, you will have to spend money on installing equipment, pipes, batteries, tank, pump. The technology allows the use of several energy sources:

The disadvantage of panels is expensive fuel (electricity).

How to save on heating?

A simple solution will significantly reduce heat loss. We are talking about high-quality insulation of walls, door blocks and window openings. This will reduce heat consumption by up to 50%.

Among all the methods of heating a home, the most economical is gas. In places where there are no appropriate communications, other options are chosen. By going, readers will find out how cheaper and more profitable it is to heat a house with gas or electricity. Today it is economical to heat cottages with coal. Fuel is available. It's inexpensive. There are automated coal-fired equipment on sale. Its price is 1.5-2 times cheaper than heat generators.

What is the best way to heat a house if there is no gas? If the room is used as temporary housing, for short stays, you can use a heater. Among well-known models, oil-based ones are more often chosen. A fairly economical and safe option is an infrared heater. The method is suitable for heating one room, not the whole house.

If there is no gas in the house, then heating can be built using solid fuel or electricity, or better yet, a combination of both. The more diverse the heating sources, the less likely it is that the system will fail.

For example, the installation of a solid fuel boiler can be supplemented with an electric convector for each room. You can combine a Russian stove on the first floor of the house and infrared heaters on the second floor. However, electric and solid fuel energy sources are not the whole list. So, let's start in order...

To heat a house without gas or electricity, you should think about the energy of burning solid fuels:

• brick kilns;
• metal furnaces;
• solid fuel boilers.

There are also fireplaces, but it is difficult to classify them as a home heating system, since they can only be used to heat one room.

Boiler operating conditions

The main models of solid fuel boilers are designed in such a way that the air flow that ensures combustion is directed by a mechanical thermostat with a chain drive. In this case, natural draft of the chimney must be ensured. However, for normal operation of the boiler, a number of conditions must be met:

• Place the pipe so that it is no higher than the incoming pipe.
• Provide the system with free communication with the external environment using an open expansion tank located at the top.
• Create a pipe system with optimal diameters and a minimum number of dead-end branches.
• Equip the boiler with fire safety equipment.

Price

The cost of solid fuel boilers varies in a very wide range - from 20 to 300-400 thousand rubles. It all depends on the design and capacity.

However, despite the price, solid fuel boilers are the best sellers among home heating equipment without gas or electricity.

The difference between a liquid fuel boiler and a solid fuel boiler is insignificant. To obtain thermal energy, liquid fuel is poured into a liquid fuel boiler instead of coal:

• diesel fuel;
• fuel oil;
• kerosene;
• vegetable oils;
• alcohol.

The last two are provided only as an illustration of the possibilities. The use of oil and alcohol is an unaffordable luxury. And the point is not even that alcohol, for example, is very expensive, but that this fuel is obtained from plant raw materials, which could be used to produce food.

Peculiarities

A distinctive feature of liquid fuel boilers is their high efficiency - up to 92%. In addition, for installation and operation, permission from special services is not required, unlike, for example, gas boilers.

Price

The price range for such boilers ranges from 25,000 to 180,000 rubles and depends on the manufacturer and the volume of the combustion chamber. The average annual cost of heating a private house is 150 sq.m. without gas and electricity on diesel fuel about 150,000 rubles.

Which is higher than the cost of solid fuel and even electricity.

It is possible to convert solar energy into thermal energy only if the sun shines frequently and for a long time over the roof of your house. Unfortunately, 80% of Russian territories have nothing to do with this. However, even in warm climates you cannot rely solely on solar heating; a backup source is definitely needed.

Principle of operation

Light-absorbing batteries are installed in place “under the sun,” which process solar energy directly into thermal energy and then transfer it to the coolant. There are two types of solar collectors - vacuum and flat. Vacuum ones are considered the most efficient and economical. Using solar energy is an achievement of science.

Price

The advantage of solar heating is the low price of solar collectors. Flat devices can be purchased at prices ranging from 1,500 to 60,000 rubles. Vacuum ones are much more expensive - about 80,000 rubles. However, if you consider that you don’t have to pay for fuel, the price is quite reasonable.

Biofuel use

Biological fuel is any organic matter that can burn. However, this term has recently come to mean the use of gases released by rotting organic matter.

Principle of operation

Anything that rots with sufficient intensity is suitable as a source of such gas. Typically, manure, food waste, and plant matter are used. All gases formed during the decay process burn well and replace natural gas.

The biofuel heating installation itself consists of units that collect the emitted gas, purify it and feed it into boilers for combustion. And then the operating principle is the same as that of a natural gas boiler.

Minuses

A significant disadvantage of this heating method is the low rotting performance under natural conditions. In order to speed up this process, you need to increase the temperature, which costs energy.

For this reason, it is impossible to use biofuel as the main method of heating a large house, but heating a small house or creating an auxiliary system is quite possible.

Biofuel heating is widely used by farms in countries such as Greece, Spain, and Portugal.

Such heat is extracted from nothing, just from the air. This is an air conditioner in reverse. The pump itself does not produce heat, it only extracts it from the medium and sends it in the desired direction.

Operating principle

The principle of operation of the pump is to take heat from the environment in which it is placed. However, the pump needs starting energy. For example, in order to move 10 kW of thermal energy, it needs to consume about 3 kW of electricity.

The difference is impressive! And if electricity is available, it allows you to choose a heat pump for economical heating of a private house without gas.

Features and prices

However, the problem is that in severe frosts such a pump malfunctions. Works well in frosts down to −15, stops working at −30. There is one more drawback - with practically free energy, the pump itself is very expensive - from 200,000 to 1,500,000 rubles.

Once upon a time they were called potbelly stoves. This name dates back to the distant times of the civil war and subsequent devastation, when the simplest joys of life were associated with great wealth.

Much has changed since then, but an iron stove is still called a potbelly stove. They look different now. Many of them are equipped with fireproof glass windows, but their essence has not changed - they heat up quickly and cool down just as quickly.

Maybe that’s why this stove was called a potbelly stove, because maintaining a constantly high temperature requires a lot of wood, bourgeois style.

Folk fantasy

In the Siberian taiga huts, where it is possible to install a cast-iron stove, but it is difficult to deliver bricks, the potbelly stove is lined on three sides with large stones, rolled in by the river. It turns out beautiful and functional - the stones heat up and slowly release heat to the air.

This technique is quite applicable in the conditions of a country house - when the house is built, but the heating is not yet ready. To some extent, stones perform fire-fighting functions, absorbing random sparks and excess heat. Stone structures can serve as a reason for the designer’s flights of fancy.

The efficiency of a metal stove will increase if you equip it with a coil for heating water and connect heating batteries to it.

Brick stoves or Russian stoves

In its classic form, the Russian stove is a miracle of engineering soap with a very efficient heating system. Not only did the stove heat the entire hut, it was also a multifunctional kitchen, a heated bed and even a bathhouse.

Nowadays, a number of functions of the Russian stove are not needed, but as heating in a private house without gas and electricity, it is effective!

In modern conditions

Making an ancient Russian stove modern is quite simple:

• If one of the sides is built into the wall separating one room from another, then two rooms will be heated. However, the stove has four sides.
• If you manage to build a stove into two walls of two different rooms, then you can heat almost the entire house.
• If the house is large, then you cannot do it with just one heat source - you will have to make a system of pipes and batteries with a water heating element.

A Russian stove differs from a simple brick stove in its size and the absence of a stove bench. A brick oven has great inertia - it takes a long time to heat up, but it also takes a long time to cool down.

To make the cooling process last longer, there is a damper system that retains hot air. However, it is in this system that the biggest danger of the stove lies - if the damper is closed ahead of time, then carbon monoxide from the firebox will not go into the chimney, but into the house.

Price

The cost of building a brick stove depends on a number of factors: firstly, on the size, secondly, on the selected materials, and thirdly, on the wages of the stove maker. Moreover, the work costs the most.

So, if the stove maker charges moderately, and you are not going to decorate the stove with marble and ceramics, then you can spend 20-60 thousand rubles. Whether it is expensive or not - everyone evaluates it differently. However, you should take into account the fact that the stove will last for decades.

How to light the stove

You can drown anything that burns. The classic option is wood and coal. However, the following sources of thermal energy have also been used in the furnace at all times.

Dung

Dung is completely dried cow dung. It burns well and leaves almost no ash. Horse manure can be used for the same purpose. By the way, there is no smell from such fuel.

Peat

Peat, or more precisely, peat briquettes. In terms of calorific value, it is somewhere between wood and coal. Briquettes burn in an already heated firebox. This means that you need to first heat the stove with wood, and then add briquettes.

Advantages - peat is environmentally less toxic than coal.

More precisely, the toxicity of peat smoke can be equated to the toxicity of firewood. Only peat produces more ash and smoke. You can only talk about the benefits of using peat if you have the opportunity to buy it at a low price. In all other cases, it is better to use firewood and coal.

Firewood

Wood burns quickly and is not always hot. To maintain a high temperature in the house you need not just a lot of firewood, you need to put it in the firebox all the time.

Coal

It is best to use coke. Coal burns for a long time, and good coked coal is also hot.

If you use black coal with low ash content and high calorific value, then one measure of coal can provide as much heat as 3-5 such measures of firewood. The only argument against coal is its high ash content.

Coal ash is toxic, so there will be a problem with its disposal.

More

There are other firewood substitutes. For example, seed husks or corn cobs. Both burn well, but not for long, and without intense heat. However, these types of fuel should not be considered seriously.

Thus, among all types of solid fuels, it is worth choosing firewood and coal. Moreover, precisely in combination. Firewood is good for lighting the stove, and coal is good for long and slow burning.

Instead of a conclusion

There are a dozen systems for heating a private home without gas or electricity - from a classic stove to solar energy. It’s difficult to advise which one to choose. However, I can give one universal piece of advice - try to create a multifunctional system with duplicating functions and minimizing risk, as on warships.

Efficient home heating system.

The costs of maintaining a home for private homeowners are already quite high. That is why the question of what is cheaper to heat a house is so popular, the answer to which will save your budget.

Why is it profitable to heat your home yourself?

In terms of heating, owners of country houses are luckier than city residents. After all, cottage owners can turn on the heating in their home at any time of the year, since they do not depend on a centralized heating system. Other advantages and benefits include:

• the ability to turn on the heating in the house at those moments when it is necessary.
• the ability to adjust the temperature to the desired level.
• the ability to independently select heating options (solid fuel, electricity, gas).

However, here the main question arises - how to heat a house economically and what heating method is considered the most profitable? This is what we have to figure out.

What is the best way to heat a house - how to decide?

To understand how to heat a house inexpensively, you need to answer several important questions:

• Will you live in the house full time or only for a few seasons a year?
• Is the quality of heating or the financial side of the issue more important to you?
• How much can you spend on equipping all the necessary systems?

Important: no one will give a universal answer to the question of how to heat a house economically. It all depends on various factors: prices for energy resources and fuel, costs of purchasing and installing equipment and a number of other factors. However, once you familiarize yourself with the heating options, making a choice will be much easier.

Stove heating and its features

The stove is considered the most profitable heating method.

When considering options for how to profitably heat a private home, one cannot fail to mention stove heating, which has not lost its relevance over many years. Installing a stove in a house is a difficult job, so it should only be trusted to professional specialists. However, proper installation of the stove guarantees its long-term operation.

The stove is heated with wood or coal, and therefore you should stock up on “fuel” in advance so that it lasts for a long time. Dry logs of hard woods, such as beech and oak, provide a lot of heat. Damp pine also burns normally, but it will provide little heat in the house.

The main thing to remember is that the stove requires maintenance. So, you cannot do without cleaning the chimney and constantly removing ash.

To keep the rooms always warm, you need to constantly add firewood, while observing all the necessary safety measures. Otherwise, a fire cannot be avoided.

To reduce the risk of fire hazards, it is better to line the floor near the stove with iron, but it is not recommended to line it with parquet boards or linoleum. If a spark hits such a floor covering, a fire may occur.

Heating with a fireplace: is it profitable?

Fireplace heating is similar to stove heating, but has some differences: it will not be possible to heat a house effectively in this way. A fireplace is most often installed only for beauty, since its heat is enough to warm up the room where it is installed.

We can’t talk about savings here either. If you are wondering what is more profitable to heat your house, we can safely say that it is not with the help of a fireplace. Despite the fact that the fireplace runs on wood or coal, it consumes a lot of “fuel” but produces almost no heat. Thus, it should be installed only in conjunction with some other type of heating equipment - so to speak, for the soul.

Water heating system

A water heating system will allow you to heat your house profitably.

Today they are increasingly saying that a fairly popular method is to heat a house efficiently using a water heating system. However, here we should immediately make a reservation - the heating bill itself may be small, but you will have to spend money on installing equipment, laying pipes, installing batteries, a tank and a pump. In addition, the cost of heating directly depends on the equipment.

To do this, you need to understand how the system works. So, there must be a boiler with the function of heating water, which then goes through pipes and enters. After some time, the water cools down and goes back to the boiler, where it is heated again. This system works in a vicious circle. In some cases, you cannot do without a special pump when supplying liquid on a forced basis.

Many people are interested in how it is more economical to heat a house with a water heating system, because it is known that it can work on various energy sources. That is why equipment is usually divided into:

• electric boilers;
• gas equipment;
• solid fuel boilers.

When answering the question of how to economically heat a house, it is worth focusing on gas and solid fuel boilers, since the cost of “fuel” in this case is quite acceptable. Electric boilers can be quite expensive due to the cost of electricity.

Using heaters for heating

Modern heaters are a very effective and safe method of heating rooms. Especially if people live in the house not all the time, but several seasons a year. The most advantageous option is the use of oil radiators, which store heat for a long time and consume a small amount of energy.

Thus, to determine which type of heating is best for you, you must first study all the available options, weighing their advantages and disadvantages, the economic costs of installation and operation. Don’t forget to choose a heating option based on the time you spend in the country house. After all, if you live at the dacha only in the summer, a fireplace and stove will be enough, but if you live there in the winter, you cannot do without a high-quality heating system.