How to wash an acrylic bath at home? Tips for washing with improvised and special means

Perfectly clean plumbing is the desire of every housewife. However, choosing at home, you should choose the right tactics. Otherwise, you can say goodbye not only to an unpleasant plaque, but also to the plumbing itself. Therefore, we will consider at home and what means are completely unacceptable for this coverage.

Care rules

For regular preventive washing, you should use a soft sponge and a specially designed product (about how, at home, will be discussed below).

The washing process is extremely simple. Initially, the surface must be moistened with water. After that, a cleaning agent is applied to a soft rag or sponge and the bath is wiped. The surface must be rinsed with water and wiped dry. To make it shine, you can use a wax polish.

The more often you resort to the usual washing of the surface, the less often you will begin to think about how to clean the acrylic bathtub from plaque at home. It is recommended to repeat this procedure once a week.

Prohibited funds

Acrylic bathtub has many advantages. However, she also has one significant drawback - this is low mechanical strength. Therefore, it is important to know how to wash an acrylic bath at home, in order not only to provide it with a perfect look, but also to protect the surface from damage.

1. Brushes with a metallic or other hard coating.
2. Cleaning products containing substances: chlorine, ammonia, acetone, formaldehyde, abrasive components.
3. Washing powders.

Products intended for cleaning acrylic bathtubs

For washing the surface it is allowed to use which do not contain aggressive components. This will allow you to quickly and easily clean the plumbing.

There are also specially designed products for these surfaces. So, how to clean an acrylic bath at home?

Consider the most popular means:

1. "Acrilan". The substance acts very quickly on the surface and is quite effective. It removes mold, rust, soap residue, plaque. Does not leave behind microdamages, scratches. The bath after using this product is covered with a light protective film.
2. "Ravak". These are products that are used to remove grease, stains, rust, scale. They perfectly disinfect the surface.
3. Acrylic Polish. An effective product designed for acrylic surfaces. Differs in low cost.
4. Team Pro. A modern product that does not contain abrasive ingredients. It allows you to achieve crystal clearness and at the same time does not leave scratches.
5. "Mr Chister" A fairly cheap solution that can effectively eliminate rust and plaque. In addition, this tool has an antifungal and antibacterial effect.

Water stone removal

The main problem that arises for people who have installed an acrylic bath is plaque on the surface. However, removing it is quite easy. So, how to wash an acrylic bathtub from plaque at home?

To remove the water stone, the following steps should be taken:

1. Take warm water in the bath. Its temperature should not exceed 30 C.
2. Add vinegar to the water - 0.5 liters. Instead of this component, you can use citric acid. You will need 1 pack per bath.
3. Stir the water with your hand. Leave the bath like this overnight.
4. When you wake up in the morning, release the water. Be sure to rinse the surface. Then dry with a dry towel.

Such measures are quite enough to get rid of the raid. But what if there is too much water stone and it was not possible to completely eliminate it? How to wash an acrylic bath at home? The cleaners described above will perfectly get rid of plaque. For example, Akrilan fluids or RAVAK Turbocleane.

Getting rid of yellowness

For acrylic surfaces, such defects are completely uncharacteristic. Often, yellowness occurs in bathtubs made of inexpensive plastic with a protective layer.

Initially, it should be said that such spots appear from poor-quality water, a sharp change in the temperature of the liquid. It is to such situations that plastic reacts with the formation of spots. In addition, it is very important that the acrylic is always dry. It is absolutely unacceptable for water to stagnate in the bathroom. Be sure to check the faucets. They should not drip water onto the surface.

It should be reminded once again how to wash an acrylic bath. Cleaning products specially designed for such coatings will perfectly relieve yellowness at home. You can use the substance "Acrilan". An excellent liquid is Tim-Profi. Such a tool effectively cleans even very neglected surfaces. In addition, it perfectly disinfects the bath.

Citric acid will perfectly clear the yellowness. It is recommended to dissolve 1 sachet in 1 glass of water. Apply the resulting liquid to the acrylic surface. Then rinse it thoroughly. Your bath will be white again.

Tool check

If the necessary liquid was not at hand, you can use another one. However, how to choose the right one that cleans perfectly and does not harm the surface?

First, be sure to study the composition of the substance. The agent should not contain aggressive components.

Further, in order to determine how to wash an acrylic bath at home, it is recommended to resort to a little trick. Apply your chosen liquid to a small area. Choose an inconspicuous area. For example, on the side. And it is best to apply the product on the bottom of the bath. Leave for 20-30 minutes. Then rinse the area. Carefully examine how the bath reacted to this

If no defects were found, then the liquid is completely suitable and you can proceed to the washing procedure.

Bath disinfection

Acrylic surfaces are generally not conducive to the growth of mold and microorganisms. However, even they need regular disinfection measures. Therefore, when planning how to wash an acrylic bath at home, be sure to think about such a cleansing. This is especially true for families with children. Do I need to expose the crumbs to additional risk?

Bath disinfection is a fairly simple event that is recommended to be carried out once a year.

For the procedure it is necessary:

1. Take warm water in the bath.
2. Add some disinfectant to the liquid. You can use the above liquid "Tim-Profi". Stir the water.
3. The bath should remain in this state for 10-15 minutes. Then release the liquid.
4. Be sure to rinse the surface. All residual solution must be removed. Don't forget to wipe the tub dry.

Chlorine disinfection

There is another method to clean the surface. However, you should be extremely careful with it. Because high consistency may damage the surface.

To disinfect with chlorine, use the instructions:

1. Get water in the bath.
2. Add chlorine to it. The solution should be 7%. Watch the consistency carefully.
3. Wait a few minutes. Then open the drain.
4. Rinse the surface thoroughly and wipe dry.

It is strictly forbidden to wipe an acrylic bathtub with a pure solution of chlorine. It will not only damage the surface, but also leave behind yellow disgusting stains.

Caring for acrylic baths is not particularly difficult. The main thing is to carry out all procedures regularly and use only those means that will not damage the surface.