How to clean an acrylic bath at home?

Almost every modern housewife faced the problem of how to clean an acrylic bath at home. It is these fonts that are most popular today, because it is these models that are distinguished by the most sophisticated design and good performance. But the polymer material requires special care and the use of certain household chemicals. In this article, we will share with you the secrets and recommendations for cleaning acrylic surfaces.

Features of acrylic bathtubs

Acrylic is a plastic material that has a certain level of rigidity and durability. Acrylic bathtubs are lightweight, comfortable and easy to maintain, and therefore quickly displace cast iron products from the modern plumbing equipment market.

Acrylic sanitary ware is manufactured according to one of the following technologies:

1. Extruding - A certain amount of fiberglass and epoxy is added to the plastic to stiffen it. Such plumbing products are installed on a specially made frame made of metal or moisture-resistant wood.
2. Casting - allows you to create a stronger and more rigid structure that can be installed directly on the legs. Such products are resistant to mechanical damage, and therefore much easier to clean.

Important! Acrylic bathtubs are easy to care for thanks to special additives that prevent the growth of bacteria, fungal infections and mold.

Another advantage of acrylic is its resistance to corrosion, and, accordingly, the absence of rust streaks.

How often to clean?

To keep your acrylic bathtub clean at all times, it needs to be cleaned as often as possible. It is much easier to regularly wash off minor stains from an acrylic surface than to spend a lot of time looking for ways to wipe off serious and deeply ingrained stains:

1. After each bath, the tub should be rinsed with water and a small amount of detergent, such as liquid soap.
2. After performing the procedure, dry the surface with a clean soft cloth or terry towel.

Important! It is necessary to clean the bath with more aggressive products once every 2-3 weeks.

All recommendations for cleaning an acrylic surface are similar to the rules for caring for other materials, but they have certain features. To quickly and efficiently get rid of any contaminants, use the following materials:

• Foam sponge with soft surface.
• fabric material

As detergents, you can use both folk cleaning methods and household chemicals - various powders, pastes and gels.

Use of household chemicals

If you appreciate a quick and high-quality result, then when deciding how to clean an acrylic-covered bathtub, pay attention to one of the following cleaning products from trusted and well-established manufacturers:

cif

One of the main positive qualities of this detergent is the versatility of use. The cleaning composition is available in the form of a gel or spray, which does not contain abrasive substances that can scratch or otherwise damage the surface of the bath.

This product is suitable for cleaning both acrylic and other surfaces - ceramics, plastics, stone or enamel coating. Detergent of this brand has a high efficiency in cleaning stains of rust, grease, yellowness or lime.

Important! It is also worth noting that this detergent has an affordable cost.

Bass

A liquid cleaner designed specifically to remove dirt from the surface of bathtubs and showers. To achieve the desired cleansing result, this substance should be used according to the following algorithm:

Important! To restore the shine of the surface, treat it with a special polish, which can be bought at any household chemical store.

Mr Chister

This tool is available in the form of a spray, which includes polymeric substances. They provide the following effect:

1. Antifungal effect.
2. cleansing property.
3. Antibacterial treatment.

Important! Before you clean the acrylic bath from limescale with this tool, carefully read the instructions that are indicated by the manufacturer on the package.

Acrylan

Cleaning composition, which is designed specifically for the treatment of acrylic surfaces. A product is produced in the form of foam, which is applied to the surface of the bath or shower.

Important! Especially effectively this tool copes with such contaminants as mold, rust, soap solutions, fungal formations and limescale.

Folk remedies for cleaning

If for some reason you do not want to use household chemicals, then popular and time-tested folk remedies, such as citric acid and vinegar solution, will come to your aid. You can use these substances in one of the following ways.

Method #1:

1. Dilute half a packet of citric acid in 1 cup of warm water.
2. Stir the resulting solution until the granules are completely dissolved.
3. Soak a soft foam sponge in the resulting product.
4. Treat the entire surface of the acrylic bathtub with the solution.
5. Leave the treated plumbing for 10-15 minutes.
6. After wetting the sponge again in a solution of citric acid, treat the contaminated area.

Important! To fully restore the appearance of the acrylic surface, the cleaning procedure must be repeated 2-3 times.

Method #2:

1. Fill the bath with water, the temperature of which does not exceed 20C.
2. Add 1.5 liters of table vinegar solution or a pack of citric acid to the water.
3. Stir the resulting composition until the active substance is completely dissolved.
4. Leave the plumbing in this state for 12 hours.
5. Drain the liquid from the bath.
6. Rinse the acrylic surface thoroughly with running water.
7. Wipe the tub dry with a soft cloth.
8. Polish the surface with a special household cleaner for acrylic.