The faucet in the kitchen is leaking - how to fix it?

The faucet in the kitchen is leaking - how to fix it? Everyone has faced this problem. You don’t have to wait for quality help from a plumber, so you need to deal with the problem yourself.

Lever taps: repair

Newfangled lever models that allow you to adjust the temperature of the water with a single lever are considered more reliable, although they also fail. How to fix a faucet - so that it does not drip - this type? The most common cause of a leaky faucet is clogging. In this case, you must do the following:

• remove the decorative plug, through which water is supplied;
• unscrew the screw, and with it dismantle the handle, which is attached with it;
• take out the bottom nut under the handle and change the cartridge to a new one.

The crane is assembled in the reverse order. How to fix the video when water drips from the tap, you can find out by watching the thematic video.

Another common problem is the supply of a weak jet of water. Cleaning the aerator will help fix this defect. It is located on the spout of the mixer. You can even unscrew the aerator with your bare hands, without resorting to pliers.

Often the reason why the faucet leaks is the wear of the rubber gasket. The latter has contacts with water, experiences pressure, can dry out, which adversely affects its service life. Sometimes the gasket lasts up to 7 years, but this rarely happens. The problem is accompanied by an unpleasant hum coming from the bathroom. In this case, the mixer should be disassembled and the gasket replaced.

These are the recommendations on how to fix it if the faucet in the kitchen is running. In addition, often there are problems not with the faucet itself, but with the push-button switch that transfers water to the shower. If it does not work, the spring has broken, then it can be easily replaced. If a leak is observed, it is necessary to replace the old gaskets in it with new ones.

Cranes of this design are considered simpler and more convenient in terms of repair. How to fix when water flows from a valve-type faucet? In this case, a worn gasket is most often to blame. To do this, unscrew the valve by turning it counterclockwise and remove the part that has become unusable. The gasket, which should come to replace its predecessor, can be made with your own hands from rubber. As an alternative to home-made, purchase a new part.

Leaking faucet mixer tap in the kitchen? Perhaps the reason lies in the wear of the stuffing box seal. In this case, water comes through when the valve is in the open position. The algorithm for how to fix the current faucet in the kitchen, in this case, is simple: unscrew the stuffing box nut, remove the unusable liner and replace it with a new one. The latter can be made from sealing tape. If the work is done correctly, the question of how to fix it - if the faucet drips in the kitchen, will cease to be relevant.

There are times when a newly installed gasket lasts for several days, and then problems with water begin again. This indicates that irregularities in the form of cracks have formed on the saddle. You can get rid of them with the help of a special cutter on the body, which replaces the worm crane.

An alternative to the capricious "worm" can be a mixer with ceramic discs. What to do - when a ceramic faucet flows? Its owners usually do not have such questions for several more years during operation. If, nevertheless, problems appear, then it is easy to eliminate them by tightening the lock nut, which is located on the body. The recommendations are similar if you want to know how to fix a plastic faucet.

Sometimes it is necessary to change the O-ring. It is its deterioration that is the reason that the faucet in the kitchen is leaking in the area where the faucet and shower hose are attached. The replacement is carried out as follows: unscrew the shower hose with a key (this must be done as carefully as possible) and take out the old seal.

It is advisable to use silicone parts: they will last longer than rubber ones.

You can learn more about how to fix if a faucet in the kitchen is leaking from the video.

If the faucet is broken, what should I do?

This is the most extreme situation imaginable - a sea of ​​water flowing out. How do you fix a broken faucet? Most likely, the tightly tightened thread during installation or failed oil seals, sealant are to blame. To do this, you need to dismantle the structure, replace worn parts with new ones.

Sometimes the crane, which was bought relatively recently, starts to malfunction. Probably the reason for this lies in the factory marriage. The specific reason for this may be different - a part with a crack in the mixer itself, a dry sealant. How to fix if the faucet in the kitchen is leaking in this case? Answer: no way.