Workshop of useful homemade products for fishing. Fishing DIY and fishing tricks

For many of those who love fishing, this is not even a hobby, but a way of life to which they are ready and even devote all their free time.

And therefore, very often inveterate fishermen have to invent and manufacture various lures, spoons, tackle and much more themselves.

DIY silicone baits

It is often a pity to part with an already used vibrotail. Or I would like to add some element to it that you think is quite necessary. It doesn't matter if you can make a new silicone bait at home.

Manufacturing:

1. In a used canning can, cleanly washed can, of a suitable size, we dilute the gypsum to the state of a thick "bazaar" sour cream and dip the old vibro-tails up to half there to obtain a template. After the solution has solidified, carefully remove them. If you want to make changes in the shape of future products, add the necessary strokes with a sharpened knife before pouring silicone.
2. Greases the finished cleaned form with plenty of fat, the most suitable option is sunflower oil, so that the finished products are damaged when they are taken out and do not stick to the shape.
3. All further actions for pouring silicone into molds must be done in the open air.heh or in a well-ventilated area.
4. Cut old unused silicone products into pieces and place them in a jar warming up on the stove... Stir it to avoid burning the silicone. We keep the fire at a distance of 15-20 cm from the heated container. To obtain silicones of various colors, food colors are added to it and, if desired, you can drip a little special fish flavoring, bought at a fishing store.
5. The heated and thoroughly mixed silicone mass is poured into the mold starting from the thinnest place... If you make a two-color bait, then the layer of the second color is poured only after the first has dried.
6. After complete solidification (usually 15-20 minutes), the bait is carefully removed from the plaster moldwe. We clean the form from the remains of silicone, correct the oil layer and the process is repeated.

DIY mini clasp for quick change of attachments

Very often when fishing, especially with fly fishing or with a spoon, it becomes necessary to quickly change the bait. For this, a special shaped mini-clasp was invented. It is quite simple, and making it at home is not difficult.

Manufacturing:

1. Tool required to create a mini-clasp:

• Nippers.
• Small round nose pliers and pliers.
• Tweezers.

1. A thin, rigid wire is taken as the base material... A large staple from a conventional stapler is acceptable.
2. We bend it with pliers into a product in shaperesembling a paper clip, but reduced in half.
3. We bite off the excess wire.
4. We select by size kembrick (hard silicone tube) of such a size that it fits snugly around the fastener made.
5. We bite a piece of pipe with nippers slightly longer than the fastener, it will act as a retainer.
6. We thread the resulting section of the tube onto the fishing line and rigidly fixed with a knot.
7. Insert the attachment you need into the other side of the fastener.
8. Pulls the silicone cambric with force. That's it, the mini-clasp is ready.

Feeder for feeding fish from a boat

If you prefer to fish from a boat, then you will definitely be intrigued by a very simple and inexpensive fish feeder. It will serve as an excellent substitute for hand casting, especially if fishing is on the current.

To make it you will need:

• a piece of sewer plastic pipe;
• two plugs for it;
• lead;
• electric drill;
• rope, rivets;
• loop and clasp.

On a piece of pipe about 30 cm long, plugs are fitted on both sides, one rigidly and tightly, the other like a window in a house on a hinge.

We drill holes along the entire surface of the feeder.

A rope is connected to the opening lid, and a lock is attached to it from the inside. Weights are placed outside the pipe near the cover.

The feeder, pre-filled with bait, is gently lowered into the selected fishing spot with the lid down because of the weights attached to it, and the unnecessary place is poured out with a slight twitch of the rope. The whole place is lured you can fish.

Wobbler from home workshop

Shop wobblers are certainly not bad: very colorful, streamlined, completely imitating a small fish and its movements in the water, but they have one big disadvantage - a high price.

Therefore, many people prefer to make them on their own at home, especially since the process itself does not require special devices and is quite exciting in itself.

Making wobblers:

1. First of all, we draw on paper a sketch of what we want to do... Regardless of the material of manufacture of the wobbler, it must be made of two symmetrical halves to pass a steel wire amplifier inside it.
2. Wobblers can be made of foam. It is easy to work with, but less durable than plastic or wood. Having decided on the material, we cut out the blanks.
3. We make from thin stainless wire fasteners for rings and hooks of tees, we install them in the grooves cut in advance in the halves of the wobbler body, and fasten them with glue. After the glue dries, make a cut for the front blade and fix it firmly with glue.
4. Then we ship the wobbler... There are many options here - everyone does this procedure specifically based on their personal preferences. That is, we customize it for ourselves.
5. Fill the remaining empty spaces on the surface of the wobbler with epoxy resin, grind it. You can start the most creative process of priming and then painting the wobbler. There is nothing holding your imagination back.

Spoon with your own hands

Making a spoon with your own hands with some skill is not at all difficult. An example is a spinner.

To do this, you need:

• an ordinary paper clip;
• hook tee;
• metal plate 0.5 - 1 mm (can be taken from an empty tin can);
• small bead;
• a piece of sheet lead;
• tools: pliers, files, scissors, files.

Cut out the shape of the petal itself from the cardboard, transfer it to the metal. Carefully cut along the contour and remove the burrs around the edges with a file.

We drill two holes along the edges and process them with a file.

We bend the holes with an angle of 90 ° in relation to the petal.

We make an axle with a ring from a wire with a loop at one end, where we attach a tee hook.

At the other end we thread a petal, then a bead and at the end we make a loop for a fishing line at such a distance, so that the lead weight does not interfere with the free rotation of the petal.

The lure is loaded empirically on the pond by attaching weights to the niche between the petal and the tee. And the final touch is the coloring of the spoon.

Homemade products for summer fishing

On fishing, there is often a problem with live bait. Catching it is usually associated with a waste of time. In hot weather, live bait quickly becomes lethargic in a bucket of water and dies.

A very simple device made of two plastic bottles will help you solve this problem:

1. Cut the neck of a two-liter plastic bottle to half.
2. Then, on the same side, cut off the neck of the bottle at the widest part.
3. You have a truncated cone, somewhat reminiscent of a watering can.
4. We cut off the bottom of it.
5. For the second bottle, cut off the bottom 5-7 cm from the place where the largest diameter appears.
6. We connect the structure together... We insert the neck at the cut, but vice versa with a small hole inward and firmly fix it with threads with a needle. On the cut-off bottom, we put a tight bottom from another bottle on the principle of a drawing tube.
7. We attach a small sinker in the middle of the side of the bottle, and a rope on the opposite side.

That's it, the trap is ready. We throw bread crumbs inside and throw a trap near the shore. Malek, swimming for food, can no longer independently get out of there.

It remains, when you need live bait, to pull the trap out of the water and, having removed the cork at the bottom, get a fresh and vigorous live bait.

How do I catch more fish?

I have been active fishing for quite some time now and have found many ways to improve my bite. And here are the most effective ones:

1. ... Attracts fish in cold and warm water with the help of pheromones and stimulates their appetite. It is a pity that Rosprirodnadzor wants to ban its sale.
2. More sensitive gear. You can find reviews and instructions for other types of gear on the pages of my website.
3. Pheromone baits.

You can get the rest of the secrets of successful fishing for free by reading my other materials on the site.

Homemade products for winter fishing

In winter, they are often used to catch a predator with live bait.

An example of such a budgetary and quickly made tackle:

1. Manufacturing material - PVC sewer tube with a diameter of 32 mm. We cut the pipe into pieces of 10 - 15 cm.
2. We process the chamfers at the ends of the pipe with a file.
3. Burn 3 holes in the tube with a heated nail. Two on one side, opposite each other, for hanging it on a tripod and one with a diameter of 1 mm on the other side, for a line stopper.
4. We make a stopper for the line in the form of the letter P and thread it into a small hole... It should not interfere with the free running of the line.
5. We make a ring (suspension) from a thick 0.4-0.5 mm fishing line, passing it through two holes on a plastic pipe. The hanger is used to attach the gutter to a rod rigidly driven into the ice so that an overly playful fish does not drag your girth under the ice.
6. We wind up to 10 meters of the main line on the pipe.
7. At the end we put on an olive load and a tee hook on a double loop.

Everything, the zherlitsa is ready to go.

Advice: wrap the end of the pipe at the suspension loop with red tape and then the disappearance of the girdle will be visible from afar, and you will always have time to reach it in case of a bite.

Homemade products for fishing with your own hands for crucian carp

There is one bait that a crucian carp, especially a not very large one, prefers to everyone else. This is common semolinabut cooked in a special way.

Decoy bait recipe (hot):

• pour water into a saucepan, drip a couple of drops of flavoring and bring the composition to a boil;
• pour the cereal into a saucepan in a thin stream, stirring continuously until a homogeneous thick mass is obtained;
• we remove the fire and leave the porridge to cool down at the same time and steam;
• when it reaches an acceptable temperature, knead it thoroughly with your hands to achieve even greater density;
• to minimize the drying of the porridge, wrap it with several layers of gauze;
• it is impossible to wrap porridge in polyethylene very quickly it suffocates and sour.

Balls for bait on a hook roll well from such porridge.

Decoy bait recipe (cold):

• pour water from the reservoir into a tin can, drip a little flavor;
• constantly stirring, pour semolina there;
• we continue the process until a homogeneous mass is formed. The density is checked as follows: we lift the spoon with porridge over the jar, if it remains on the spoon and does not fall down, the porridge is ready;
• set the porridge aside for 10 minutes to swell;
• we take a prepared syringe and fill it with a mixture.

The bait from the syringe is squeezed onto the hook and wraps around it in a circle, the last of which closes the sting of the hook.

DIY fishing do-it-yourself for the feeder

For feeder fishing, the trough is a consumable item. A cliff when casting, a hook and a new feeder is needed. In order not to constantly buy new ones, you can make them with your own hands from scrap materials.

Plastic bottle feeder:

1. We take an ordinary plastic bottle (preferably green), cut off its neck and bottom.
2. We mark the resulting plastic and then cut it with scissors into rectangles measuring 6 * 13 cm.
3. We fold the finished blanks into a cylinder with an overlap of 1 cm and fix it with a stationery stapler.
4. On the lateral surface feeders attach a piece of sheet lead with a loop attached to it from an ordinary paper clip.
5. With a heated small soldering iron, we burn holes in the feeder in a checkerboard pattern at a distance of 2 cm from each other.
6. Insert the swivel into the resulting loop.

Everything, the feeder is ready, you can start fishing.

As you probably already understood yourself, there is nothing difficult in the manufacture of additional home-made devices for fishing, and for the most part they do not require any specific skills or expensive machines for their manufacture.

Therefore, do not be intimidated by this, feel free to act, invent little things yourself that can simplify the process of fishing or increase the catching power of the tackle, and just while away the long winter evenings.

How long have you had a really BIG CATCH?

When was the last time you caught dozens of HEALTHY pike / carp / bream?

We always want to get the result from fishing - to catch not three perches, but a dozen kilogram pikes - this will be the catch! Each of us dreams of this, but not everyone knows how.

A good catch can be achieved (and we both know this) thanks to good bait.

It can be made at home or purchased at fishermen's shops. But in stores it is expensive, and to prepare groundbait at home, you need to spend a lot of time, and, frankly, homemade bait does not always work well.

Do you know that disappointment when you bought groundbait or cooked it at home, but caught three or four perches?

So maybe it's time to use a really working product, the effectiveness of which has been proven both scientifically and practice on the rivers and ponds of Russia?

It gives the very result that we cannot achieve ourselves, especially since it is cheap, which distinguishes it from other means and you do not need to spend time on manufacturing - you ordered it, brought it and go!

Of course, it's better to try once than hear a thousand times. Moreover, now is the season! when ordering this is a great bonus!

Learn more about the bait!

One of the components of the leisure of people keen on hunting for the inhabitants of the deep water is to make homemade products for fishing: all kinds of floats and feeders. This occupation requires certain skills and perseverance. The items you have to deal with are small in size, and only the accuracy of the operations can lead to the desired result.

Of course, you can buy everything in the store, but fishermen have a prejudice in relation to purchased baits: they think that fish will take better on bait made with their own hands. And sometimes it really is.

This passion for homemade fishing is inherent in every amateur fisherman, and no one spares time for this activity.

You can do a lot with your own hands, but the feasibility of making one or another attribute allows you to form three directions for applying your own strengths and skills:

• equipment elements;
• accessories;
• bait.

Most often, the home-made item for fishing is precisely the components of the fishing rod equipment: a rod, fishing line, a hook with a bait, a float and a sinker. You can't really dream up with a fishing line, but with regard to other elements, there is a wide choice of implementing your ideas. So, you can experiment in terms of length and material, the number of sections and rings, models of reels installed on the rod. And the variety of simulators of live baits is innumerable at all, they can be made in the form of various designs and colors.

Auxiliary equipment is fishing homemade products that help an amateur, for example, in the case of a large specimen, these include landing nets and hooks, and for storing the catch - cages or kukans. When deeply swallowing the hook, use an extractor. All these elements can be made by yourself.

And, finally, bait - here every self-respecting fisherman has his own secret component, which he keeps and will not give out to anyone. Very often, instead of ready-made bait, when collecting for fishing, they prefer to complete individual ingredients in order to prepare the most suitable mixture for the conditions at the site chosen for fishing.

Often, fishing homemade products bring good luck while fishing. But a more significant result is moral satisfaction from the creative process itself, from doing what you love.

You should start with the hook - of course, no one is going to do it on their own, but even a novice amateur knows that it tends to dull over time. And sharpening sometimes has to be done in the field: someone just sharpens on a stone, and experienced fishermen always have a homemade sharpener with them.

A dull sting often becomes the reason for the fish to descend after a bite. To prevent such cases, you need to periodically check the hook: the sharp one easily sticks into the nail and is fixed.

It is not difficult to restore the properties, for this it is enough to have useful things with you - any of the following items:

• thin file;
• zero sandpaper;
• sharpener made of hard material with a groove for the size of the hook.

In any case, two or three movements are enough for the fishing gear to regain its sharpness. In places with a rocky bottom, you cannot do without the ability to sharpen a sting. It is necessary to check the degree of sharpness after each hook.

This fish bite alarm is a typical self-made object: many of today's fishermen in childhood made a float from a goose feather or bottle cork and took the homemade product to the pond.

In addition to these things, the materials for the pointer can be any other light airy objects:

• styrofoam;
• plastic tube;
• wood rod or bar.

To make the tackle, you will also need pieces of wire, rubber bands and paint. The tool will fit any of the appliances available in the house.

Foam and cork melt - very sensitive, made in the form of a ball or drop. It is processed with a clerical knife and cleaned with an emery cloth. When the model is ready, it is blown off from dust and covered with paint, and when it dries up, a hole is poked in the center for the rod. It can be from any suitable size thin tube object: a feather, a plastic cocktail tube, sandwich skewers. At the bottom of the axle, a wire loop or an eyelet from a hook is attached to thread a fishing line.

A quill pen is like a float that behaves well on the wave, sensitive and easy to make. To begin with, it should be cleaned of the spine without damaging the case. The top in the thinnest place is cut off, and a ring is attached to the lower part. In the center of the rod for attachment to the fishing line, an elastic band is placed along the diameter of the tube. Now you can paint or varnish your homemade products.

A plastic tube melt is made by analogy with a goose feather. First, by sealing its ends, the resemblance to the pen shaft is achieved, and then all operations are performed in the same order.

Homemade floats painted in bright colors on fishing are clearly visible on the water and are sensitive to bites of even a small roach.

And their position in relation to the surface is regulated by the selection of weights

One of the necessary additional devices when fishing for large fish is the hook. To make it, you can use old abandoned rods or handles from household household tools like a mop. The hook can be made from a suitable elastic wire or knitting needle.

The sequence of actions for making homemade products at home:

1. The handle of the hook is wooden, a hole is drilled in it on one side for the tube, and on the other for fastening the cord. The latter is fixed in the hole by means of a screw plug.
2. The tube is then inserted into the prepared groove in the epoxy-attached handle. A retractable insert of a smaller diameter is fitted into the tube to create the length of the hook - in the folded state it is 50 cm, and in the working one 90. The movement inside the tube must be free.
3. The hook is bent according to the size of the fish and is fixed on the retractable part with a bolt connection. As a rule, the amount of bend is in the range of 3–6 cm. A rubber tube is pulled over the tip of the hook itself for safety.

Having tested the ease of assembly and disassembly of the device, you can take a homemade product for fishing and at the same time be sure that the tool will not fail. After all, the hook was made by hand and you can vouch for every detail.

To make a fishing mix with your own hands, it is not necessary to purchase ingredients in the store - you can use the products that are available in the apartment's kitchen. It is enough to verify this by the example of the selection of bait components for bream. In order for food to be desirable for fish, you need to know the preferences of the future trophy.

And they depend on several factors:

• the quantity and quality of the natural nutrient medium of the reservoir;
• seasonality in terms of the predominant diet;
• weather.

There are some fishing tricks for creating a bait composition: when sifting the constituent products through a sieve, the mixture becomes aerated and free of lumps. Due to this, there is a faster dispersal of the feed over the casting zone. Aroma is an important component in the attractiveness of a bait, but a measure is needed here: a pungent smell can create a negative effect.

Homemade bait for bream is usually made on cake, although you can use rapeseed, pumpkin, hemp and flax seeds for this purpose, as well as ground crackers or crushed. It also includes bran as a baking powder when rolling the feed balls.

Clay, cereal or pea flour and oatmeal are added as a binder. Flavors can include the odorous seeds of certain plants, oils and essences.

As mentioned above, the feed mixture must be suitable for the specific fishing conditions.

You can use the following recipes to make homemade bait with your own hands:

1. Summer mix on the lake - 300 grams of crushed crackers, bran and boiled millet. Toasted and ground sunflower seeds - 200 g and a teaspoon of cinnamon powder. Use clay as a binder, adding it to the required thickness.
2. Summer mixture, but for the river - 200 g of sunflower cake, sprouted peas and boiled oatmeal, as well as 100 g of bread crumbs. As a flavoring agent - 3 teaspoons of coriander powder.
3. Autumn bait - sunflower cake, crushed crackers, boiled rice and rye bran, 100 g each, 50 each - bloodworm, maggot and finely chopped bacon, add a teaspoon of coriander for flavor.
4. A homemade spring mixture for fishing is also made on the basis of sunflower cake (100 g) and 0.1 kg of rye bran and boiled millet are added. Fodder bloodworms add 80 g and ground coriander - 2 teaspoons. To bind and dilute the mixture, mix the clay with sand.

Thus, making any kind of homemade product is not a burden for a fisherman, but a pleasure. And in terms of cognitive fishing, this brings a lot of new things, and the hunting process becomes more successful.

Experienced anglers are confident of success at any time of the year, if tackles for fishing with their own hands were previously made, taking into account the peculiarities of fishing, the type of reservoir and many other factors. There are many secrets of self-creation of fishing tackle with your own hands. But you can pay attention to the most popular methods that can be used even by beginners.

Secrets of making tackle for carp

Carp belongs to the common inhabitants of reservoirs middle band Russia. On the territory of many regions there are fishing farms with carp ponds and lakes for paid fishing. But even in the case of a trip to their comfortable shore, an experienced fisherman will definitely take with him a rig made by himself. These homemade fishing tackles are often a more reliable guarantee of a big catch than the best tackle from leading manufacturers.

When performing such "crafts", the simplest objects are used, which are present in any private household. For example, every expert takes a cunning and careful carp with him self-created balalaika (put it on)... To make it you need to take:

When assembling such fishing tackle with your own hands, foam is used as a "beacon" showing the place where the tackle is thrown. A fishing line of the required length is attached to it with the help of electrical tape and a nylon thread. A sinker is attached to its opposite end. On a sufficiently long leash, the hook is attached.

Ideally, fishing homemade products are used, installed in several places. The length of the line and the weight of the load are determined depending on the characteristics of the channel and the bottom of the reservoir, the current and other factors.

When going out for carp fishing, various baits can be used. Experienced anglers call one of the most comfortable of them soaked peas... A plastic retainer will allow you to control the bite.

Homemade carp fishing

Another inhabitant of the underwater depths, popular with fans of quiet hunting with a fishing rod, is the carp. Simple fishing homemade products from available materials will help to outwit and catch him. The easiest option to perform is the float tackle.

For manufacturing you need to take:

The finished structure is assembled in a few minutes. All its components must be connected with maximum strength. The carp usually weighs 4 kg or more. This strong inhabitant of the underwater depths can easily get off the hook or break the tackle.

In reservoirs with a calm flow, it can be installed bottom gear option... You can even use the "zakidushka" known to everyone since childhood, which has become the prototype of the feeder popular today. To perform this option, you will need a strong rod, a fishing line, the length of which can reach 100 m, a float and several hooks at once. It is most convenient to use a bell as a bite alarm. Such homemade products help the fisherman to become the owner of a significant catch and, not being constantly on the shore, to control the tackle.

Features of making tackle for winter fishing

These types of tackle are convenient just for fishing in the cold season. In most cases, homemade products for winter fishing provide the fisherman with the opportunity to move away from the place of quiet hunting and control bites due to the sound signal of a bell fixed on the surface of the water or a hole in the ice.

Many fishing homemade products are the perfect addition to professional gadgets. For example, it is popular to manufacture additional elements based on the familiar ballpoint pen... Such devices will help improve spinners and jigs.

Blank rods of various colors are used for manufacturing. They are cut into rings and attached to underwater gear. This decor will attract the attention of potential prey. In the winter season, it will additionally draw attention to itself, allowing underwater inhabitants to suggest the opportunity to feast on small fry, rare in winter.

In the cold season, many familiar objects come to the aid of the angler:

Numerous homemade products for winter fishing are done with their own hands to ensure comfortable fishing from the shore or from the ice next to the hole. It is interesting to do such additions on your own.

In conclusion, it is only worth recalling how pleasant this option is for each fisherman to spend leisure time in nature. The preparatory stage for choosing homemade gear makes fishing an even more interesting hobby. Tackle execution is available to every beginner.

Classification

Fishing tricks and homemade products that exist today can be divided into several categories, each of which differs in its practical application. The first one contains various gear. These can be products that successfully copy foreign counterparts, the cost of which is simply fabulous, or real inventions of fishing enthusiasts. This group includes floats and hooks, leads and spinners, donks, jigs and much more.

In the second category are fishing tricks and homemade products, which have already been sufficiently tested by experience. This also includes lures, various types of baits and baits, as well as invented methods and methods of fishing. This is a fairly large topic, which discusses how to fish in one place or another and at one time or another of the year.

The third, rather extensive group includes various accessories - either invented or copied from existing samples. They represent a variety of devices that allow:

Increase the shelf life of fish in hot weather;
- dress properly so as not to freeze on the ice in winter;
- save bloodworms and other bait by placing it in special containers.

So what are the most popular fishing tricks and homemade products that are made from scrap materials?

Toothbrush Poppers

Very often, fishing tricks and homemade products literally amaze with the game of fantasy of the craftsman who made them. And this surface bait from a foreign manufacturer can be quite expensive. That is why it makes sense to make it yourself. Poppers, which are also called walkers, as surface baits, should not sink. Only a small amount of heating is permissible. What material can be used that will stick well to the water? These are toothbrushes that are primarily tested for buoyancy. This is quite easy to do. It is enough to collect water in an ordinary bucket and throw a brush into it. It should stick to the surface and not sink.

The work is done using a small grinder with replaceable attachments, which looks like a micro grinder. Making this tricky fishing tackle begins by sawing off the bristled part from the brush. The resulting edge should be processed with a sandpaper nozzle. You will need to make a small hole at the top and bottom. It is necessary for attaching the tee with a swivel ring. Next, the homemade bait needs to be tinted. Colors must be bright, for example green and red. Tees are inserted into an almost finished product. If you test the resulting structure in the bathroom, it turns out that, due to its heavy weight, it is pulled to the bottom. A narrow strip of foam glued on top with superglue will allow you to avoid this. In this case, the popper will float well and will stop sinking.

Wobblers

In the fisherman's workshop, DIY fishing tricks can be crafted from a wide variety of materials. However, for wobblers, it is best to take a birch. This tree is excellently processed and does not prick in the process. At the first stage of making the future bait, her body is ground using a cutter. After that, the resulting workpiece is processed first with coarse, and then with fine sandpaper. In this case, the wobbler will turn out to be smooth and will not have any burrs.

The product will require fastening loops, which can be made from a curtain rod. The wire is bent in the form of a slightly winding letter "P" (to hold it better). In addition, for strength, one end of the letter should be slightly longer than the other. Next, the bracket is driven into the wobbler. To do this, use "nails" cut from wire of the same diameter.

The wobbler must have a certain weight. That is why it is enclosed by inserting a small tin plate into the carved triangular recess in the abdomen.

At the next stage, wobblers are painted with gouache. In the most critical places, it is advisable to use a gel pen, which will give the color clarity. After that, the bait should be varnished in 2-3 layers.

The blade is inserted last. It can be made from unnecessary computer disks on one side of which paint is removed with a needle. Next, a cut is made in the disk with a hand jigsaw and the part is inserted into the wobbler.

Spoon for pike perch

Fishing Tricks and Fishing Tricks can be crafted from just about anything. Sometimes even broken tweezers are used for this. By itself, this tool is of high quality and is made of stainless steel. That is why it can serve as an excellent bait for zander. As you know, this fish is a predator characterized by a narrow pharynx. So a narrow spoon is also needed. The tweezers are just perfect in this case. From one leg of this cosmetic tool, you will need to cut a workpiece of the required length. It is polished a little. This allows you to give the part the desired shape and get rid of small burrs.

The next stage of work is to drill holes. They are needed to attach the fishing line and tee using swivels and rings. It should be borne in mind that this procedure is not easy. The selected material is strong enough that a thin drill can even break during operation.

At the end of this stage, the threesome is screwed on. It is better to do this from the heaviest side, otherwise the spoon will not hold well in the water. For those who wish to give their product an aesthetic look, it is recommended to cut scales on it. On this piece of tweezers, there are already transverse layers. It only remains to make a few longitudinal even cuts and the shiny spoon for perch or pike perch will be completely ready for fishing. It is worth noting that such homemade products are no worse than branded ones. And the one made of tweezers can even be called the best. Indeed, in it, the tee is located on the heaviest side, which allows you to avoid overturns of the spoon and overlaps.

Summer little things

There are many fishing tricks and a huge number of homemade products that are used not only by beginners, but also by experienced fishermen in the warm season. Summer fishing has its own specifics. During its holding, special attention is required to preserve the catch. After all, the fish quickly deteriorates in the heat, and by the evening it may simply have to be thrown away.

Saving the caught

After the fish has been pulled out of the water to the shore, it should be carefully (so as not to pinch the insides) to get rid of the hook. And if the catch was severely injured, then it should not be placed in a bucket with the rest of the catch. Such actions will lead to the fact that in a few hours all the fish will deteriorate in the heat.

Wounded prey should be killed and gutted, and then wrapped in fresh grass (preferably nettles). It is better to store such fish in the shade, where it will be blown by the breeze and be cool. If there is no such place nearby, then the gutted prey should simply be salted.

Live storage

It is important for many fishermen to bring home a live catch. For this, the fish must be kept in water, while being in a cooker or in a cage. The net of the latter should not be metal, since the prey will make attempts to get out into the reservoir, which will lead to its severe injury. You need to hang the cage in the shade, deepening it into the water enough to allow the fish not to beat each other while swimming. In addition, in cramped conditions, the catch is in danger of self-poisoning by products released as a result of metabolism.

Homemade cage

This fishing item is offered by all specialty stores. However, if the cage is branded, then the price for it is set such that not every fisherman can afford to purchase it.

For the summer season, this accessory can be made by yourself. At the same time, it will be wide enough, long, and foldable if desired.

How do you complete this fishing DIY? To do this, you need to take a strong wire. You can use ready-made metal rings. To create a compact tackle, you need three of them at once, but with different diameters - large, medium and small. You will also need a nylon mesh. The one that was previously used for windows as protection against mosquitoes will come in handy. From such a mesh, a sock-like product is sewn. It should match the diameter of the rings. They need to put on such a sock and attach with the help of small stitches. To keep fish in the cage, you will also need a cover. It is made from a nylon mesh stretched over another wire ring. Little tricks must be used to secure the entire structure by the fisherman. They consist in the use of a nylon rope tied to the structure with a reliable knot. Otherwise, the catch with the catch may float away with the current. And so that the prey does not go to the bottom, a small children's life buoy can be attached to the upper ring.

DIY floats

This is a small device that signals a bite, fishermen love to make with their own hands. First of all, because there is no point in buying something that you can do yourself. In addition, fishing homemade products and DIY tricks are a hobby of many water hunting enthusiasts. And this does not mean at all that buying a float in a store is impossible due to its high cost. Many fishermen can afford to buy the very best that a modern manufacturer has to offer. However, the peculiarity of homemade fishing tricks and tackle is that they are sometimes the most suitable option for successful fishing.

For many fishermen, homemade floats are much better than purchased ones. After all, they can be made in any shape and painted in the most pleasing color for the eye. And making this tackle is quite simple. Just keep in mind that the first products are unlikely to be perfect. But then, as they gain experience, each fisherman will be able to refine his crafts, as well as come up with various and most unusual options for floats.

Such tackle made of goose feathers is good. This material is easy to find in any body of water that these birds prefer. The feathers lost by them sometimes simply float on the surface of the water. It remains to bend over and pick up this unique natural material.

Self-made floats can be of different sizes. Large ones are meant for large fish, and vice versa. You will need to cut off everything unnecessary from the pen, and leave only its base. As a result, only a light, thin, but at the same time quite strong stick will remain in the hands. Everything unnecessary should also be cut off from its upper side. From below, that is, in the place where the feather should be attached to the bird's skin, you must not touch it. Otherwise, the resulting float will constantly get wet. To carry out these works, which will make it possible to make the main part of the float, you will need a sharp clerical knife. After the completion of the work, the product is painted in bright colors, which will allow it to be much more noticeable on the water. It is easier to do this with nail polish that is water resistant. In the cut part of the float, a fishing line is provided.

Catching carp

This fish is one of the most popular among professionals and novice fishing enthusiasts, as it lives in almost every body of water. You can ensure yourself a good time with a fishing rod if you use a few tricks for catching crucian carp.

And you should start with complementary foods. It should be borne in mind that crucian carp is very sensitive to odors. That is why he does not always respond to the complementary foods offered by specialized stores. Small tricks of anglers when catching crucian carp are to use ordinary feed, to which pre-pounded roasted seeds are added. This mixture is pre-wetted. This allows her to settle to the bottom of the reservoir. Crucian carp does not bite very actively when using ordinary dough on grain flour. To correct the situation, you can add a little valerian tincture to the complementary food.

One of the unusual ways to get a great catch is to singe the hooves of cattle at the stake. While still smoking, they are thrown into the water, which contributes to an excellent bite.

There are other fishing tricks and homemade products for crucian carp. So, for a good catch, so-called spring nipples are often used. Such a tackle is designed for the crucian carp to suck food from the bottom into the mouth. That is why hooks are taken on short leashes and then hidden in the bait, which is in the feeders made of bottle corks, as well as from wire twisted into a spring with a concave lead plate. During feeding, the crucian carp swallows the bait, and with it the hooks.

In the cold season

There are also winter fishing tricks and DIYs. They make it easier to fish and create a certain comfort when a person is in difficult weather conditions. One of the accessories that is quite easy to make with your own hands is a hook. It requires a handle from an old umbrella and a sharpened metal rod. You can take an electrode from which the insulating layer is previously knocked off. One end of such a metal rod must be sharpened and bent in the shape of a hook, and the other flattened out on the anvil. You will also need a plastic dowel for the hook. It is put on the rod, sliding it up to its flattened part. Next, the dowel is inserted into the umbrella tube. It is fixed to it by flattening.

Many fishing tricks and homemade products for winter fishing protect a person with a fishing rod from various kinds of dangers. So, every fisherman, moving on the ice, needs to carry the so-called lifeguards. These are two wooden handles, turned on a lathe, in each of which a sharpened steel pin is fixed with epoxy glue. These parts are connected with a rope, the length of which is 30-50 cm less than the growth of the fisherman. "Lifeguards" are worn around the neck. If the fisherman falls through the ice, he must stick the pins into the edge of the water and climb up, standing on the rope like a step.

Many fishing tricks and homemade products, the ideas of which are presented above, have been actively used by anglers in many countries for more than a dozen years.