LED night light with batteries. How to make a beautiful night light with your own hands

Many people associate this idea with the New Year, because it is at this time that there are a lot of light bulbs, lights and garlands around. To make such a night light you will need a minimum amount of materials. Just a beautiful glass jar and a garland.

You can also use additional materials to create a decor, but a minimalist night light is more relevant due to the trend of this style in fashion now. So, you need to put the garland in a jar and enjoy the beautiful sight. To make the lamp look more spectacular, you can put several jars of lights next to it.

Night light with infinity effect

Such lamps can be found in the store, but we will create them with our own hands. For this you will need:

• acrylic mirror,
• translucent glass panel,
• strip with LED inserts,
• aluminum strip,
• wooden board.

Production plan:

1. Make grooves in a block of wood for a mirror and glass panel using special tools.
2. The aluminum strip must be folded in the shape of a rectangle and fixed to the bar with bolts between the cuts made earlier.
3. Wrap the aluminum strip with LED tape using glue or wire.
4. Insert the mirror and glass panel into the recesses.

Night light - cloud

Such a lamp is an excellent decor in a nursery for a small child. You just need to take a lamp with a round, oval lampshade and glue it with cotton wool or other fluffiness in the form of a large cloud. The cloud should hang in the air, so you first need to thread a dense thread into the structure through the inside.

LED night light

Such a night light can be made from any material, because diode bulbs are completely safe (they do not heat up, unlike other light elements). This option is suitable for avid needlewomen and needlewomen. After all, there is where to roam the imagination. Anything, there would be a desire! The LED night light can be made wall-mounted and reverse wall-mounted.

The LED wall night light is made from a straight piece of dense material and the diode strip itself. The base material can be beer cardboard, a thin, not heavy wooden board, and so on. From this material, you need to cut out any shape (cats, flowers, butterflies ...) and attach an LED strip on the reverse side. The finished structure can be attached to the wall.

Night light that creates stars on the ceiling

Wherever this idea of ​​a night light did not flash: in films, on TV, and so on. No wonder. A night light that creates stars on your ceiling attracts people's attention and gives the room magic and coziness. Such a night light will not only create a cozy atmosphere in the room, but also give pleasant unforgettable emotions of magic and joy to the child. To make this night light you will need:

• Small glass jar with lid
• thick kitchen foil
• Felt pen, marker,
• Scissors and awl
• Board or any other hard surface

Manufacturing sequence:

• Transfer the stars to the foil using a marker,
• Move the foil to a hard surface and make holes with an awl, needle,
• Now move the sheet of foil into the jar, firmly attaching it to the walls. You should get a jar with an inner layer of foil walls.
• Put a lantern inside the jar, or you can put a garland, and close the jar with a lid. Turn the structure upside down.

paper night light

This version of the product is simple in execution, but requires great accuracy and perseverance. Paper is a pleasant material for needlework. You can make a beautiful night light out of it. To work, you will need thick paper, a clerical knife or an awl, and any object that emits light. You just need to create neat holes in the form of some kind of pattern and roll the paper into a cylinder, placing the "light" inside.

After looking at all kinds of do-it-yourself night lamps, we can conclude that making a beautiful practical room decor is a pleasant pastime for creative people.

Anyone can create their own night light if they wish. This may seem like a very time-consuming process, but for that, creating your own decor element will bring a lot of benefits, subsequently aesthetic pleasure and comfort.

Create beautiful masterpieces of home lighting and delight your loved ones!

Sometimes you just need a nightlight in a room. Of course, the easiest option is to buy it in a store, but often you want something unusual and original. Then simple master classes come to the rescue, which are easy to repeat and do not take much time.

At the same time, the craft will look beautiful, give the room an atmosphere of comfort and be combined with the overall interior. So, as you already understood, today we will talk about how to make a night light with your own hands.

Night light starry sky"

The first and very easy to manufacture is the “starry sky”. It got its name for its interesting appearance, which in the dark resembles the same sky. It can also be called a children's night light, although you can even use it in your own bedroom.

List of necessary things for its manufacture:

• Glass jar with a lid. It is better to take a cylindrical jar than a regular one.
• Thick foil.
• Small battery operated flashlight.
• And also an awl.

First you need to cut a piece of thick foil as high as a jar. Next, make holes in it, it is desirable that they are the same and evenly distributed. After we place a piece of foil in a jar and install a lantern. Then you can turn on the resulting craft and use it for its intended purpose.

There is also an easier way to make a DIY night light. This time we won't need foil, but we will need an awl. We take a cylindrical tin can, after removing the label and glue residue from it, and make holes with an awl.

Then we paint the jar in any color you like, it is best to do this with a can of paint. Next, put a battery-powered lantern or even a candle in the finished night light, but be careful, it's still fire.

LED night light

Now, let's talk about how to make a DIY LED night light. This master class will be more difficult than the previous one, but the result is worth it. Here is a list of required materials:

• A pair of transparent plastic tubes, which should be of different diameters.
• LEDs of the desired color, as well as brightness.
• The tube is large enough.
• Glass pebbles (decorative).
• Short wire.
• Hot glue (you can also use instant glue).
• Pliers.
• And of course the board to which we will connect the LEDs.

In order not to get confused, we have made step-by-step instructions for this master class:

The first step is to bend the ends of the prepared LEDs with pliers, you can see how to do this correctly in the photo.

The next step is to connect the already prepared LEDs with a piece of wire. Don't forget about polarity. Next, we attach the two resulting ends to the finished board.

After you need to check the operation of the LEDs and the entire structure as a whole, for this you need to turn on the night light, namely its executive part. In case the bulbs start to heat up, then add a resistor to the common circuit.

Now we take two transparent tubes. The smaller one must be placed in the middle of the larger one and carefully glued. In all voids, it is necessary to fill in decorative glass stones.

The final step is to take a cork, it should be with LEDs and put on a large tube. If the plug turned out to be larger than the diameter of the tube, then make a seal. For example, it can be made from a small piece of a strap.

Now the night light is ready and you can check its operation, there should be no malfunctions.

As you can see, if all the necessary materials are at hand, making such a night light is quite simple. And it looks very beautiful and original, and most importantly, it performs its main function - it illuminates the room at night.

A wooden night light also looks very interesting, but it is more difficult to make it.

So, today you learned how to make a night light called "starry sky" from a glass or tin can with your own hands, as well as how to make an interesting and original LED night light. I hope you chose your favorite idea and everything worked out for you.

DIY photo of nightlights

A night light is a lighting device used both for its direct functional purpose and as an additional element of decor. It is difficult to overestimate the role of these lamps in shaping the design of the bedroom, rest room. In stores, in the markets of electrical engineering, you can find a variety of models, but all of them will resemble each other in certain aspects. If you want to show imagination and originality, then create a night light from LEDs with your own hands.

You can make a lighting fixture for decorating a bedroom from improvised materials, including CDs, cardboard or plain paper, nylon threads, plywood sheets, glass or plastic bottles, etc. There are so many options that it will not work to fit everything in one article. The emphasis is on LED lamps, so the devices are less energy-intensive and as safe as possible.

This device is characterized by compactness, simplicity of design, which is associated with the use of a simple electrical circuit. Any person who set himself such a goal can create it on his own. When forming the design, be guided by the interior of the room in which the device will be installed.

For the production of lighting fixtures, old electrical parts obtained from failed fixtures and even unrelated equipment, including fumigators, mobile phone chargers, electrical plugs, etc., can be used. Tin cans, plastic or glass cups, children's toys and even syringes (of course, without a needle) can be used to decorate and create a unique shape.

If you are confident in your abilities and want to realize an unusual idea, then you may need to purchase more expensive items and parts.

In the process of assembling the lamp, pay great attention to electrical and fire safety. If low power LED bulbs are used, the possibility of a short circuit cannot be ruled out. Especially unpleasant consequences can be when using lamps in children's rooms. Try to eliminate even the most unimaginable and unlikely outcomes.

Avoid classic incandescent or halogen bulbs as they get excessively hot during operation. LEDs are the perfect solution. In addition, they reduce the amount of electricity consumed by 7-8 times and will be economical even when the lighting is on for the whole night.

Of course, you can pick up a low-power incandescent lamp. Using an illustrative example, we calculate the amount of energy consumed per year for a 25 W incandescent lamp. Let's assume that the lamp works 5-6 hours daily. In this case, 55-60 kW will run up in 360-365 days (exactly a year). The indicator is insignificant, but you can save. With identical power, diode lamps will be much brighter, so if the light output from a 25W incandescent lamp is sufficient, then buy a 5W LED (or less).

In the circuits of nightlights made from fumigators, chargers with voltage reduction through resistors, wide and narrowly directed LEDs can be used. Choose products with maximum brightness.

Highly directional devices have a limited light beam aimed only in one direction. This fixture will look good with a main light source (such as a chandelier), but be sure to connect the chandelier and night light via a double switch so that you can activate the devices separately.

Varieties of homemade nightlights

Below we will consider the most common options for making do-it-yourself night lamps.

Night light from transistors in the form of the moon

To build a lamp, you will need an LED strip and two transistors through which the first element is connected. The first transistor will automatically regulate the device due to the incident light, after which it will start the second transistor, which directly turns on / off the flexible board.

By adding a resistor to the circuit, you can adjust the sensitivity and threshold with which the transistors fire and the backlight lights up.

As for the design of the night light, before starting work, find a sheet of plywood and cut a circle out of it. The base should resemble the letter "O". Use a printer and print out an image of the moon. When everything is done, take a drill in your hands and drill two holes. One - in the upper part, will serve as a fastening of the night lamp to the wall, the other, in the lower part - will be used for pulling the cable.

Next, glue the lamp base to the plywood circle using special PVA wood glue. You will first have to sand the surfaces, making them perfectly even and smooth. Be sure to perform degreasing, otherwise the adhesion will be weak. The design as a whole is as simple and clear as possible.

After a few hours (until completely dry), measure the length of the LED strip by attaching the board along the edge of the letter "O". Cut off the excess part in the place indicated by the manufacturers (look for the "scissors" image).

1. Solder wires and LED strip.
2. Glue the printed image of the moon onto the plywood circle. Take your time to smooth out any wrinkles. The edges need to be bent, forming a "skirt", which will have to be cut off in the future.
3. Wait for the glue to dry.
4. Drill a hole to install the photocell. Choose a place so that the element is combined with the pasted image.
5. Remove the protective layer located on the back of the flexible board, then stick the LED strip around the perimeter of the oval. Pass the wire through the pre-made hole in the bottom (read above).

1. This hole must be used to pass the power cable coming from the source (distribution board, socket, etc.).
2. Use a regular nylon tie to tie the wires together.
3. The transistor connection diagram can be found on the Internet - it is as simple as possible. Unfortunately, one cannot do without the basics of electrical engineering here.
4. Solder the wires to the photocell and use heat shrink tubing to improve the insulation.
5. Solder the strands from the power cable to the work board.
6. It is recommended to fasten the board to the lamp using Velcro or other quick-release elements.
7. Place the photo sensor in the pre-made hole and fix it with glue.

Hang the finished device in the room where you plan to use it and enjoy the result. Using a switching power supply, you will protect yourself and avoid unnecessary expenses: when the night light is turned off, but the power supply is connected to the network, the latter will practically consume no electricity.

LED night light from an old electrical plug

Another simple do-it-yourself night light is made from an ordinary electrical plug. Of course, unlike "porridge from an ax", creating a lamp from one plug will not work, so you will need LEDs, two resistor elements, two capacitors, a zener diode and polyvinyl chloride tubes. The latter will be necessary to isolate the wires and prevent short circuits.

Inspect the plug and remove the ground pins. Remove the clamp, then grind off the rim on the LED using a needle file.

The connection diagram of electrical elements is similar to the use of a fumigator (a device plugged into a socket with a “pill” to repel mosquitoes and flies). The device is disassembled, the heating element is removed, and an LED is mounted in the free space. The voltage from the mains is supplied through the capacitor. Excessive voltage acts on the rectifier bridge, the resistance and the capacitor are activated at the output, smoothing out the ripple. The mains voltage should be about 400 V.

In this case, instead of a fumigator, an electric plug is used. The finished scheme is placed inside the ceiling, the shape of which can be arbitrary. The ceiling is created independently or bought in a store (usually these are plastic or glass products). You can cut the frame of a night lamp out of wood, covering it with a protective layer of special varnish and impregnation, which excludes the appearance of fungus or mold and decay.

In this case, we are talking about decorating the device. As an electronic circuit, you can choose any of the options described above. Plywood is a natural and environmentally friendly material, easy to process. With the help of a manual or electric jigsaw, you can easily give it the desired shape.

In the process of making such a lamp, you may need a jigsaw, drill, glue, nails, a hammer and a pencil or other stationery item for marking.

Finished products are mounted on the wall, and the luminous elements are located between the wall and a sheet of plywood of the selected shape. Cut out an image of a cat from plywood and hang the finished lamp on the wall. It looks simply chic and much more original than lighting fixtures sold in stores.

To create a "home zoo" of nightlights, you need a template of an animal, stars and other objects, which will have to be printed on a large sheet of paper. Cut it along the contour, acting as carefully as possible. It is desirable to print on a sheet of A3 format, but it may suit the option on A4 format if a small lamp is being made.

Attach the drawing to the plywood and circle it with a pencil or marker along the contour. Next, you need to cut out the resulting figure and attach the LED strip to the back. Find the conditional center of the cut out figure where you want to attach the board. This will create a night light with a uniform glow in all directions. For fastening, it will be enough to have an adhesive layer hidden under a protective film on the back of the LED strip.

Now you need to think about fixing the lamp to the wall. To get the best result and avoid a situation where the light practically does not go beyond the borders of the plywood figure, the night light should not lie close to the wall. Glue a wooden block to it or tighten it with self-tapping screws and already build a fastener on it (for example, an “ear” for which the device can be hung on a dowel sticking out of the wall).

Please note that you can cut out several identical figures, make nightlights out of them, but place them at different angles.

This option involves cutting out a metric from plywood with the name of a child, spouse, etc. If you want a more original lighting fixture, then try creating a multi-level plywood lamp by cutting out various shapes and superimposing them on top of each other due to the difference in dimensions. If the size of such a device is large, then instead of an LED strip, it would be rational to use a led lamp.

Do not use incandescent or halogen lamps for plywood, wood and paper nightlights. They have an excessively high heating temperature, which increases the level of fire danger.

Homemade from a faulty fumigator

This method has been partially described above, but let's look at it in more detail. To make this night light you will need:

• fumigator - so that it is not a pity, take a device that has failed;
• two capacitors;
• resistor;
• diodes for rectifier bridge;
• two white LEDs (although the glow and color temperature are selected individually, in accordance with the preferences of each consumer).

The sequence of actions is as simple as possible: the body of the fumigator is disassembled, the heating element is removed and LEDs are mounted in its place.

The principle of operation of the resulting lamp is as follows: the mains voltage is supplied to the capacitor. The reactance of the device interacts with excess voltage and goes to a rectifier bridge, consisting of KD209 diodes. The output voltage from the rectifier bridge activates the load resistor, while the second capacitor is responsible for smoothing the ripple.

The resulting DC voltage feeds the white diodes through the capacitor. The voltage on the first capacitor must be at least 400 V. This is important to consider when building a rectifier bridge from diodes. The total number of LEDs varies depending on the desired end result. Regardless of the choice, the wiring diagram remains the same.

Phone charger as a power supply

Almost every person in the house has a charger from an old mobile phone lying around. Perhaps this power supply is faulty or just lying around unnecessarily.

Inspect the charger and determine its power. Let's assume that this parameter is 6 watts. Using Ohm's law, calculate the resistance of the required current limiting resistors depending on the LEDs used. The maximum current through the LED must not exceed 20 mA.

If the voltage of the selected diodes is the same, then they can be connected through a single resistor. The light will still be inhomogeneous, but such differences are insignificant and imperceptible to the human eye. After assembly is complete, fix the parts with superglue and install in the center of the ceiling, next to the chandelier.

During the day, the lighting fixture will be invisible, and at night it will delight with dimmed light, sufficient to ensure that the room is not as dark and gloomy as the children imagine it to be. The power of the finished lamp will be 7 W, so the power consumption will be minimal.

Thus, for a homemade night light, you can take the case of any electrical device that has failed. This is one of the main advantages of making lamps with your own hands. Larger lighting fixtures are made from powerful LED light bulbs or solid pieces of flexible tape.

The choice of materials, the step-by-step process and the power of the led devices depend on the desired end result. The main difficulties are associated with soldering the electronic circuit, and decorating the device, for example, using plywood, is not difficult.

Night, darkness - not everyone likes such an environment, which is why nightlights were invented. Children are afraid to be alone in dark rooms, and nightlights have always helped dilute this atmosphere. If you make it unusual, children will go to bed with great desire.

There are many different handmade nightlights, and today we will show you a few options.

Nightlight made of wooden sticks.

We will need:

Wooden sticks, you can choose the size as you wish;

PVA glue (or other wood glue);

Cartridge and light bulb;

Mount (base) for the cartridge, can be made from corrugated paper;

1. We take our sticks and glue them with squares. We need about 25-35 of these squares.

2. From cardboard cut out the base for the cartridge. The size corresponds to the size of the squares of the sticks.

3 . We make a hole for the cartridge.

4. Depending on the size of the cartridge, we glue several squares and a piece of cardboard, which will serve as a stand for us on the table.

5. We begin to build our lamp, gluing all the squares one by one. We stack them on top of each other in any position.

6. We insert the cartridge with the lamp and our lamp is ready!

How to make a night light "Starry sky"?

The starry sky is a mystery that has always attracted our attention and our eyes. Now, thanks to the night light, you have the opportunity to enjoy the starry sky without leaving your home. From the material, you will only need things that every home has:

Foil sheet;
- a jar with a lid;
- flashlight;
- awl;
- scissors.

1. We take a sheet of foil and carefully make holes with an awl. If we want to get a full night sky, then we can use a star map.

2 . We cut off the excess foil, leaving the dimensions suitable only for the jar, the height of the sheet is equal to the height of the jar.

3 . We twist the sheet and insert it into the jar.

4. We put a flashlight at the bottom, turn it on and close the lid.

Enjoy the starry sky!

How to make a beautiful night light in the bedroom?

In order to make such a wonderful and beautiful night light, we need:

Bank (glass or plastic) with a lid;
- lace fabric;
- a small flashlight;
- scissors;
- sewing machine.

1. With the help of a centimeter, we take measurements from the jar. We need to know the exact dimensions in order to sew the overlay fabric correctly.

Today, you can purchase lighting fixtures for a wide variety of purposes for the home. Perhaps the most relevant lamp for a child's room is a night light.

Many children are afraid to sleep without light, and such lighting fixtures solve this problem very well, since they give little light, but at the same time it is quite enough for the child. At the same time, they consume a minimum of electricity. The popularity of hand-made products today is explained by the fact that many things needed in everyday life can be made independently at home. This article will tell you how to make a night light with your own hands from materials available in the house.

Theme for registration

Recently, the theme of the starry sky has been very popular for nightlights. At home, you can create an imitation of the starry sky in several ways. Making a night light with your own hands will be very profitable, because buying such products is quite expensive.
Thanks to this, you will get the following benefits:

• save money;
• create something with your own hands;
• please the child with a beautiful lamp;
• get creative.

Sky in the stars

In addition, such a lighting device can be installed not only in the children's room, but also in the bedroom. If in the first case it will create twilight, then in the bedroom - a romantic mood.

starry sky

Since it is the starry sky that is most popular today, we will consider several options for creating a night lamp of this type with our own hands.
Method number 1. Can lamp.
Note! The advantage of just such a lamp is that it does not need to be connected to the mains.
To make such a night light with your own hands, you will need materials that can be easily found in the house. The list of required materials includes:

• a glass jar with a lid;
• thick foil;
• tray. It can be replaced with any surface that does not scratch;
• flashlight.

Of the tools you will need:

• scissors;
• awl.

The basis of such a night light will be a small flashlight that runs on little finger batteries. To make a lamp, we perform the following manipulations:

• on a piece of foil we draw a schematic starry sky;
• put the sheet on a tray and make holes in it;

Note! The height of the sheet must necessarily correspond to the height of the jar.

• roll the foil into a tube and insert it into the jar;
• at the bottom of the jar we put the included flashlight and close the lamp with a lid.

The result of labor

Method number 2. Can lamp.
Such a lamp can be made even in the field. The set of materials for this is as follows:

• any tin can;
• nail / awl;
• dye. We choose the color according to our own taste;
• autonomous light bulb / flashlight.

The process of creating a night light is as follows:

• we clean and wash the jar from the remnants of the contents;
• we make holes in the jar with a nail or an awl. We make holes in a chaotic manner or according to the chosen scheme;
• paint the jar;
• we put the jar upside down, and inside we put an autonomous light bulb or flashlight.

As you can see, you can even make such a complex version of a lamp as a starry sky with your own hands at home. Both methods will allow you to create a beautiful projection of the starry sky on the ceiling and walls in the children's room.
But besides this, there are other types of lighting devices that can play the role of a night light. You can also make them yourself at home.

LEDs in a bottle

In addition to the models of lighting devices described above, a night light can be made from an ordinary can and LEDs. In this case, the creation process will be as simple as in the first two cases.
To assemble such a lamp you will need:

• Glass bottle. An excellent solution would be to use a bottle of a non-standard original shape;
• insulating tape;
• network cable with plug;
• LED garland for decorating the Christmas tree.

In addition, a very small set of tools is needed:

• wire cutters;
• drill and drill bits for drilling glass or ceramics.

To create a lamp from a bottle, follow the instructions below:

⦁ wash the bottle inside and out;

Note! The bottle must be dry!

• at the bottom of the bottle, almost at the very bottom, we drill a hole for the wire. We do this very carefully so as not to damage the bottle;

Bottle drilling

• after that, we insert the wire into the drilled hole and bring it out through the neck;
• we clean the ends of the wire and make a knot at a distance of 2-3 cm from its edge. This is done in order to prevent the cable from being pulled out of the bottle;
• cut off the plug at the garland and strip the ends of the wire;
• isolate the wires with electrical tape;
• the resulting garland is placed in a bottle. At the same time, the neck itself remains open.

Finished device

Here it is worth clarifying that in the process of operation such a night light will accumulate the products of the work of the LED garland at the bottom of the bottle. In addition, over time, the efficiency of the lamp will also decrease slightly. To minimize this effect, tie black strings to the garland before placing it in the bottle. Then "hang" a garland on them inside the bottle.

Night light and lace

A children's night light for a girl can be made using lace as a decorative element. Thus, you can give the glow of the lamp additional charm and charm.
In this case, for the manufacture of the device you will need:

• a little canvas with lace;
• threads;
• plastic or glass jar;
• battery operated flashlight.

Of the tools you will need only scissors and a needle.
The assembly instructions for such a lamp contain the following steps:

• wash and clean the jar from dirt and labels;
• we wrap it with lace;

Note! Lace should not protrude along the edges of the jar or overlap. This will degrade the light performance of the device. If the edges still come out, carefully trim them with scissors.

• sew the edges of the lace;
• put a flashlight on the bottom of the jar and close the lid.

You can make such a lamp very quickly. In reality, you will spend about 10 minutes on it. This night light will fit perfectly into the interior of a little princess.

Lamp with butterflies

Such a night light also belongs to the "romantic" ones, and therefore is more suitable for a girl's room. To make it, you need to have on hand:

• wire (about 50 cm);
• white paper (2 sheets);
• glass / plastic jar;
• flashlight;
• butterfly stencils.

A lamp with butterflies is made as follows:

• cut out several butterflies from white paper using stencils. We will need about 6-7 pieces;
• we fold the second sheet of paper into a tube (the jar should pass relatively freely into it) and beautifully decorate its edges. Curly cutting can be used;
• glue butterflies to the resulting tube (4-5 pieces). We place them in a chaotic order;

Note! Do not forget to leave two butterflies for later.

• then wrap the prepared jar with wire. You should get semicircles;
• on the bends of the wire we tie the remaining two butterflies;
• inside the previously obtained tube we place a jar, at the bottom of which there is an included flashlight.

The resulting lamp will be very beautiful and will be a great addition to any nursery interior for a girl.

Fatin in the studio!

Another way to make a night light is to use tulle. Here you will need a round cover, tulle, glue and a flashlight.

Tulle ball

The manufacture of the device is as follows:

• cut tulle into circles;
• we take the tulle and fold it in the form of a rose on the ceiling. Then we fix them with glue. You need to glue a tulle rose only in the middle;
• thus we make out the whole ball;
• put a flashlight inside. It can be replaced with a Christmas tree garland.

As a result, we will get a very beautiful and delicate nightlight.
Now you know that making a night light at home with your own hands is an easy, fun, interesting and creative activity. In just 5-10 minutes you will get a beautiful lamp that your child will really like and will fit perfectly into the interior of the nursery, and indeed any other room.

Illumination of buildings with ground lamps - an overview of the most popular, installation