This article describes the basic methods of how to type quotation marks on the keyboard. Based on the strengths and weaknesses of each method, recommendations are given for their use in each specific case.

Types of quotes

First, let's figure out what quotation marks are. They are conventionally divided into two types: "paws" (their second name is "German") and "Christmas trees" (they are also called "French"). In the first case, these are two commas located at the top of the text. Most often they are used when writing text by hand. The second option, called "herringbones", is pairwise grouped characters less (open the text) and more (close it). This option is used for professional text formatting in specialized applications (for example, in brochures, books or

The ways

There are the following ways of how to put quotes on the keyboard:

• Using special keyboard shortcuts.
• Using a specialized symbol window in the word processor "Word".
• By applying the symbol table.
• Using the ASKI code table.

Each of the methods has both strengths and weaknesses. It is on the basis of their ratio that one can give correct recommendations regarding their use.

Keyboards and languages

For the quotes themselves, there is no separate key on the keyboard. It is natural - not so often such a character is typed. For these purposes, a combination of them is used. Moreover, it changes depending on the active language at the moment. The dialing algorithm in this case is as follows:

• We move the cursor to the place where it is necessary to enter such a character.
• Determine the current active language (this can be done with the help in the lower right corner of the screen).
• Hold down the Shift service key and do not release it.
• If Russian is active, then press "2". The English version uses the Russian "e".
• After that, release both keys and this sign should appear in the work area.

This is the simplest and most versatile way to put quotes on your keyboard. It works in all, without exception, applications. But it has one significant drawback. So you can type only the classic "paws", but "Christmas trees" will not work. If this option is suitable, then you can use this method.

and "Word"

Another option for entering such characters is to use the word processor "Word". You can use the keyboard shortcuts provided earlier. Only in the case of the English language, the symbol "" "will appear, and for the Russian language - the" Christmas trees ". But there is also an alternative input method. To do this, we perform the following actions:

• In the open window of the word processor "Word" go to the "Insert" tab.
• In the field "Symbol" we find the drop-down menu of the same name.
• Next, select the item "Other symbols".
• Using the navigation keys, find the desired version of the quotes and highlight them with a marker.
• Press "Tab" until the marker goes to the "Run" button.
• Then press "Enter".
• We pass with the help of "Tab" to the button "Close" and again press "Enter".

This is a more sophisticated way of typing quotation marks on the keyboard. In addition, special software is required - the word processor "Word". But at the same time, the user has the ability to choose the type of quotation marks.

table of symbols

Another answer to the question "Where are the quotes on the keyboard hidden?" is the use of a symbol table. In this case, you must perform the following procedure:

• We launch this utility. The easiest way to find it is using the search bar. In it we type: "Character table". Then press "Enter".
• At the end of the search, we find this program in the list and launch it (for example, by clicking the mouse or pressing the "Enter" key).
• In the window that opens, using the navigation keys, find the desired variant of quotation marks (German or French) and copy it to the clipboard using the "Ctrl" and "C" keys.
• At the next stage, we go to the application we need. If it has already been launched, then use the keyboard shortcut "Alt" and "Tab". Otherwise, open it through the "Start \\ Programs" menu.
• The next step is to perform the insertion procedure. To do this, press "Ctrl" and "V".

The previously indicated key combinations need to be pressed only on. Otherwise, you will not succeed.

ASKI codes

Another method is based on the use of ASKI codes. In this case, quotes on the keyboard are typed using special sets of numbers. The algorithm for entering such characters is as follows:

• Turn on the Num Look key if it is inactive (its LED should be on).
• Hold down the "Alt" key on the right side of the keyboard and do not release it.
• On the numeric keypad, type the symbol code. Before entering the digital code, you must press "+" and "0". The code for “” ”is“ 34 ”. "171" is used to open "French" quotes, and "187" is used to close.
• Let go of "Alt" - and you're done.

A universal method, but quite simple. And besides, there is a choice of the type to be dialed. There is only one drawback in this case - it is the need to remember special codes. And this is not always convenient.

Within the framework of this article, the main methods of how to put quotation marks on the keyboard were described in detail. When working in the word processor "Word" it is most rational to use standard keyboard shortcuts. At the same time, do not forget that in the English version "paws" are introduced, and in Russian - "fir-trees". But in all other cases, it is better to use a symbol table or ASKI codes. This way you can choose exactly the sign you want.

If you are just starting to get acquainted with the capabilities of a computer keyboard, then you may need some tips how to put quotes on the keyboard... There are several different methods for this. Let's take a look at the most common ones.

First, let's look at the existing types of quotation marks. They are symbolically divided into two types: German (familiar to all "paws") and French (in other words "herringbone"). The first type of quotation marks are commas that appear at the top of the text. Most often, such quotation marks are used for writing text by hand. And the “herringbone” quotes are combined in pairs: a smaller sign for opening the text, a larger sign for closing it. "Fir-trees" are used to design texts in professional publications, namely, prospectuses, magazines, booklets with advertising.

Quotation Mark Methods

There are such methods for entering quotation marks on a computer keyboard:

• by pressing a special key connection;
• in the word processor "Word" through a special window with symbols;
• using a table with symbols;
• using the ASKI codes.

Any technique has its own pros and cons. Thanks to these ratios, it is possible to give correct advice on their application.

How to put quotes "Christmas trees" on the keyboard

Since quotes are rarely used in the text, there is no specific key assigned to them. To enter them, you need to press several keys at once. In addition, the combination depends on which language is currently activated. If you need to use herringbone quotes, then the procedure is as follows:

This is the easiest and most commonly used quotation mark method. In this way, you can enter quotation marks in any application. However, it has a major drawback. So only "German" quotes are entered, and "French" will not work. If this type of sign suits you, you can use this method.

Quotation marks in the word processor "Word"

Another way to enter quotation marks is in the character window in the Word processor. Here, when typing, you can use the way described above. One difference: if the Russian language is activated, "Christmas trees" will appear, and with English - "paws". However, you can use another method of administration. To do this, you need to take the following steps:

1. Use the navigation keys to find the required type of symbol and select them with a marker.
2. Press the "Tab" key until the selected character moves to the "Run" button and press "Enter".
3. While pressing the "Tab" key, go to the "Close" button and press "Enter" again.

This method of entering quotation marks is the most difficult. In addition, such an introduction requires a special program - the word processor "Word". However, this allows the user to select the types of symbol.

Applying the symbol table

There is another method of entering quotation marks - use the symbol table. To do this, you should perform the following actions:

The keyboard shortcuts listed above, click only on the English keyboard. Otherwise, nothing will come of it.

Enter quotes through ASKI codes

You can also enter quotation marks using the ASKI codes. In this case, quotation marks are placed using special numeric combinations. To do this, we perform the following actions:

This technique is quite simple. In addition, you can choose the type of quotes. The only drawback of this method is that you need to remember the symbol codes. And this is sometimes burdensome.

If you need put in quotes or brackets part of an expression already in quotes / brackets, remember two simple principles of double brackets and double quotes:

* Russian is not mathematics, signs are not added, that is, you do not need to put double brackets or quotation marks (one picture) at the end;

* to facilitate the perception and understanding of the text it is better to make quotes inside quotes and brackets inside brackets of different pattern... In this case, the reader will understand exactly where one expression in parentheses / quotes ends and how it relates to another.

What means "Brackets and quotation marks of different patterns" and what kind of drawing is it?

How to format double brackets correctly

Let's start with parentheses. The main brackets are round (like that). The second-level brackets are most often square - [like this]. And the double brackets will look like this: ... (... [...]) ..., ... ([...] ...) ... or ... (... [...] ...) ...

For instance, “I like the work of the group“ Nox Arcana ”(spelled Nox Arcana [from Latin -“ secret night ”])”.

How to format double quotes correctly

Quotes have the same basic scheme, but there are some subtleties. There are several varieties of quotation marks, and different countries have different traditions. We most often use "Christmas trees", "paws", "computer quotes" and some others. In printed publications and documents quotation marks "first level" are Christmas trees (on our website we also use them). However, many Internet resources use direct computer quotation marks as the main quotation marks. In fact, this is not so important (although it is more correct and more solid to use Christmas trees), the main thing is that the selected drawing goes through the text consistently.

Second level quotes, as a rule, there are “legs” - they look good with Christmas trees, as they are quite “contrasting”: you will not confuse them. But with straight computer quotation marks, the paws in some fonts may not look so good, so check that the reader can figure out how one quotation mark is located relative to another and the phrase as a whole. Again, once you've accepted some kind of second-level quotation mark, use it consistently.

A few examples:

“We went to the At Home cinema and watched the film“ Rest in the Country House ”there. Not a bad movie, ”said a friend.

LLC "Company" Skolopendra ".

The price tag read "Rowan and Watermelon Juice."

For some time now the built-in database of certificates for SSL in TheBat (it is not clear for what reason) ceases to work correctly.

When checking posts, an error pops up:

Unknown CA certificate
The server did not present a root certificate in the session and the corresponding root certificate was not found in the address book.
This connection cannot be secret. You are welcome
contact your server administrator.

And there is a choice of answers - YES / NO. And so every time you take off your mail.

Decision

In this case, you need to replace the S / MIME and TLS implementation standard with Microsoft CryptoAPI in TheBat!

Since I needed to combine all the files into one, I first converted all doc files into a single pdf file (using the Acrobat program), and then, through an online converter, converted to fb2. You can also convert files separately. Formats can be absolutely any (source) and doc, and jpg, and even zip archive!

The name of the site corresponds to the essence :) Online Photoshop.

Update May 2015

I found another great site! Even more convenient and functional for creating a completely arbitrary collage! This is the website http://www.fotor.com/en/collage/. Use it to your health. And I will use it myself.

Faced in my life with the repair of an electric stove. I have already done a lot, learned a lot, but somehow I had little to do with tiles. It was necessary to replace the contacts on the controls and burners. The question arose - how to determine the diameter of the burner on the electric stove?

The answer was simple. You don't need to measure anything, you can easily determine what size you need.

Smallest burneris 145 millimeters (14.5 centimeters)

Medium hotplate is 180 millimeters (18 centimeters).

And finally, the most large burner is 225 millimeters (22.5 centimeters).

It is enough to determine the size by eye and understand what diameter you need a burner. When I didn't know it, I was soaring with these dimensions, I didn't know how to measure, which edge to navigate, etc. Now I'm wise :) I hope I helped you too!

In my life I faced such a task. I think that I am not the only one.

The paired punctuation mark is mainly used to convey ironic meaning or to highlight quotations, direct speech and references. It happens that the author encloses words or phrases in quotation marks, since the term he uses is not known to everyone, or tries to emphasize the meaning of the phrase in an unusual meaning, thereby probably making fun of some hero from his story. In the variations below, the user will be able to choose the appropriate way of writing the punctuation mark and easily put quotation marks in the Word. There are several types that have individual names and take place in any text document.

Types of quotes

These types of paired signs are the main ones:

• "French" - are also called "Triangular", most of all known under the term "Fir-trees", sometimes bear the name of "Corner quotes";
• "English doubles" or "single" - are known as "legs" located at the top.
• "German" - have a second name - "expanded legs";

Sometimes the "word" is enclosed in the upper even symbols.

Single and double sign - "Fir-tree"

Working with a text editor, you often have to put different symbols and punctuation marks. It is believed that printed quotation marks must be used in the documentation without fail, and in a handwritten document already in the form of double commas. It is not always possible to put quotation marks in the Word the first time, although if you remember the key combination correctly once, then the next time, for example, inserting a Christmas tree quotation mark will not be so difficult.

Option 1: Single Angle Quotes

They are placed by means of the key combination Shift + "B" and "U". To make it open:

1. Change to the English keyboard layout "Shift + Alt";
2. While holding the "Shift" button, press the letter "B";
3. Write the required word.

To add a private one:

1. Change the keyboard layout to English;
2. Hold down the "Shift" button; press the letter "U";
3. Added single corner marks.
4. Change the layout to Russian and continue working.

Option 2: Paired punctuation mark "Fir-tree"

You can put a herringbone in the following ways:

Method 1

The easiest and most memorable way is the key combination "Shift + 2". Need:

1. Set the mouse pointer to the desired location;
2. Switch the method of entering letters to the Russian keyboard (if necessary) by pressing "Shift + Alt";
3. Hold down the "Shift" key and press the number "2" on the upper numeric keypad.
4. Enter the appropriate word and repeat steps 2 and 3.

Note! Pay attention to the cursor, it must be separated from the previous word by a space, otherwise you will get not an opening herringbone quote, but a closing one.

It is mandatory to put spaces and check them for presence.

Method 2

Paired herringbone quotes can be supplied by code. Be sure to turn on the "Num lock" button.

1) To open a double quote you need:

“- hold down the“ Alt ”button and dial four digits“ 0171 ”. Work with the numeric keypad, which is located to the right of the alphabetic keyboard.

Attention! Don't forget to activate the "Num LOCK" button.

2) To close the sign:

"- also hold" Alt "and type" 0187 ".

The difference lies only in the codes, the main thing is not to confuse and then double Christmas trees can be easily printed.

Method 3

This way of writing double triangular quotes is pretty simple. By means of the "Symbol" function in the Word, a huge number of symbols are inserted and the triangular punctuation mark is no exception. Follow these steps:

1. Open the section "Insert" in the main menu, click on the button "Symbol" and "Other symbols";
2. In the "Symbol" pop-up window, specify in the "Set" field - "Additional Latin-1";
3. Select the required double quote and click on "Insert";
4. Done!

Method 4

If you want to surprise others, then this method is definitely for you. It is necessary:

1. Switch to English layout (Shift + Alt);
2. Type the letters "ab" and simultaneously press the "Alt" and "X" buttons - as a result, you will get an opening symbol (");
3. The closing symbol is set like this: "bb" and pressing the "Alt" and "X" buttons - as a result (") the symbol is ready.

Uppercase single and double quotes “Paws”

Traditional quotation marks in Russian writing are paired punctuation marks similar to "paws". If you need to indicate the meaning of a word, a translation from another language or an excerpt from a quotation - use upper and lower commas to help. And how to put such signs, we will consider a little below. There are two ways to make quotes with commas in Word:

Option 1: 'Single feet'

Single ‘comma quotes’ are made as follows:

1. Place the mouse pointer where you want a single character;
2. Switch to English letter input (Shift + Alt);
3. Turn on "Num LOCK";
4. Hold "Alt" and enter numbers (0145) - open the quote and close (0146). Use the numeric pad to dial numbers.
5. The result is in the picture below.

Option 2: "Double"

There are several ways to do this:

Method 1.

You need to know the sign code and add quite a bit of manipulation with the keyboard shortcut. Follow the steps:

1. Hold the Alt key and type to open “0147” and close “0148”.
2. The result is the upper comma quotation marks.

Attention! You need to work with the numeric keypad, which is located to the right of the letter key.

Method 2.

We will learn how to insert quotes with commas using the letter "E". For this you need:

1. Place the mouse cursor in the desired place;
2. Turn on the English layout with the combination (Shift + Alt);
3. Hold "Shift" and click on the letter "E". Pressing the letter "E" again will add a closing quotation mark in the form of commas.
4. Done! Compare the result with the picture below.

Option 3. Expanded

There is another easy way how to make quotes with commas in Word. Only they will turn out in a position deployed from each other. The symbol will open from the bottom and close from the top. Here's what you need to do this:

Straight quotes

Often the user is faced with such a task, to replace the quotation marks "triangular" with "straight". Everything is very simple:

1. Position the mouse pointer where a direct punctuation mark is needed;
2. Switch to Russian input of letters (Shift + Alt);
3. Hold "Shift" and press the number "2" - a sign (") will appear;
4. And immediately click on "Ctrl + Z";
5. The result is in the picture below.

How to turn AutoCorrect on and off

In versions of Word 2007, 2010, 2013 and 2016, you can enable this function as follows:

1) Go to "File" or "MS Office button" for Word 2007 - then "Options";

2) Point to the item "Spelling" and click on "AutoCorrect Options";

3) In the window that opens, do the following:

Open the "Auto-format on input" tab;

In the "Replace as you type" section, remove or add a check mark opposite the line "" straight "quotation marks with" paired "".