Optimal graphics settings world of tanks. Setting up graphics in WOT

Good day!

Newbies, rejoice! Today you can learn how to properly set up the game.

This is important, because by properly setting up the game, you can play comfortably. Consider the basic settings of the game.

Experienced gamers have long known how this is done.

Therefore, the article is unlikely to be useful to them. But "recruits" who are just starting to play tanks should take the time to read.

The settings will increase the profitability of the game and it will become much more comfortable to play World of Tanks. You will learn how to set up graphics, scope, markers, how to increase FPS and other important points.

From this article you will learn:

Settings in the game: why are they needed?

Graphics settings in any games, including World of Tanks, are necessary. With them, the chance of winning increases, and the gameplay becomes more enjoyable.

Often, FPS drawdowns interfere with movement, shots often go off target. The result - the enemy gains an advantage over you.

FPS is a display of frames per second. The value depends on the processor power, the optimal amount of RAM, the PC configuration. The best option is starting from 50 frames. The best parameters can be achieved with high-performance computers, optimal RAM, powerful processors.

But what if you don't have all of the above? Is it possible to properly set up the game? Undoubtedly.

We set it up correctly

Now you will learn how to compensate for weak points and increase the configuration to the maximum. Competent World of Tanks settings will help with this. The game has many settings that affect not only the quality of the image, but also the gameplay in general.

At the same time, please note that there are also settings that do not affect performance. They are in the "Game" tab. Here you can customize the selection of battles, mini-map, chat, in a word, every little thing. To do this, select and put a tick in the right place.

But the rest of the online game settings are important. They will help you change the quality of the graphics, adjust the screen resolution. At the same time, the choice of quality must be approached with caution, without overestimating the performance of your PC.

Learning how to set up the World of Tanks game for battle

1. General settings. Located in general settings. Here I think everything is clear.

2. In the "Chat" spam is turned off, censorship of messages is turned on. Here you can accept friend requests, platoon invitations, and messages.

3. In the "types of random battles" section, "assault" and "encounter battle" are disabled. In these modes, the maps are the same as in random battles, but the victory condition and the location of the bases change. Even in the "Encounter Battle" there is one base left, the victory goes to the one who destroys all enemies or captures the base first. And in the "Storm" one of the teams is engaged in the defense of the base, the second - respectively, defends it. Personally, I do not like these types of battles, but for a change, you can try.

4. Option "Combat interface" - here the "Effect of optics" is turned off (significantly spoils the picture) and the display of a combat vehicle that destroys you (personally makes me nervous).

5. Be sure to check the boxes next to "horizontal stabilization in a sniper scope", "enable dynamic camera". If this is not done, you will not be able to shoot on the move.

6. Regarding the mini-map options, it is better to turn them off and use the mini-map mod, which has an advanced feature. When using the mod, disable the options. If this is not done, the parameters will decrease due to duplication.

7. We also put a tick on "display distinguishing marks" - this allows you to exchange trunks with other players.

General settings

Above, I wrote that you can set the automatic settings for World of Tanks. But it is better not to be lazy and do it manually.

There are many types of settings.

The quality of the graphics is configured by going to the "Advanced settings". With the naivety of a powerful computer, we raise everything to the maximum (we push the sliders forward). With weak hardware, we think over which FPS indicators it is important to increase or decrease. Quite frail PC? Move the sliders to the minimum. Well, if nothing helps, download mods or assembly.

Sound problems are set up elementarily. Adjusts the sound sliders to a comfortable volume. The microphone and voice communication are regulated in the same way.

In the "Control" tab, you can change the current control settings and sensitivity to the sight.

In the "Sight Settings" the standard game sight is configured. There are both arcade and sniper sights, the type of information changes, markers, weapon indicator.

Markers are configured in the corresponding tab, where the normal and alternative markers of destroyed tanks (allies and opponents) are adjusted.

How to set up a video card?

Now let's figure out how to set up the video card of the World of Tanks game. Consider this on the example of NVIDIA. To configure drivers, right-click on any empty space.

You will see a list with the following options: 3D - adjust image settings - settings according to the 3D application - apply.

Select the map control panel - manage 3D parameters.

Now set the following options: CUDA / texture filtering / anisotropic filtering / multi-display acceleration / mixed GPU / vertical sync / triple buffering / background lighting shading / anti-aliasing / maximum pre-frames / gamma correction, power management mode / anti-aliasing / parameters. If you don't have any options, tweak the ones you have.

Such settings will make the map work correctly.

Graphics settings

There is a choice of 3 levels of "graphics quality" - high, medium, low. You can also set it up manually.

You can choose from these options:

1. Fog display.

2. Water display.

3. Distance of drawings.

4. Object.

5. Game effect.

7. Distance of drawings.

Control

The location of all controls available during the battle can be configured in the "Touch Control". Attention: some are disabled in the general control settings.

Once you click on the selected item, a green area will appear. Within it, the element moves and there is a slider that changes the size of the elements. You need to configure the interface so that it is as comfortable to play as possible.

In the "control" you can adjust the sensitivity of the joystick, camera and other game parameters.

1. Enabled - the sight will constantly follow the locked targets.

2. Auto-aim - affects the behavior of auto-aim.

3. On the button - makes it possible to turn off / on the auto-aim for arcade and sniper modes during battles.

4. In the arcade - automatic crosshair tracking in arcade mode.

5. Left-handed mode - swaps the fire button and the movement joystick.

6. Off - the crosshair will not automatically follow the target.

7. Free view - disables / enables areas that allow you to turn the camera from the gun during the battle.

8. Dynamic joystick - will change the movement joystick.

Markers

Here, the markers of those players that are displayed above their combat vehicles during battles are configured for the alternative and standard modes.

For any type of military equipment, the following parameters are included: type of equipment, icon, model, player name, vehicle durability, level.

Setting up the World of Tanks game correctly is not difficult at all. Even if this is the first time, just read what was written again. I'm sure everything will work out!

After completing the settings, you will be amazed at how much new opportunities will open before you. Not enough performance and at the same time everything is done? I'll have to think about buying a new video card.

World of Tanks is by far the most popular online game in Russia and the CIS, as well as one of the most popular in the world. Tanks are loved by both young gamers and the older generation, who fell in love with WoT from the first one-shot. All of them scold the developers for what the world is worth every day, but still continue with pleasure to “bend over” enemy combat vehicles in daily battles and their fantasies.

As you know, an improved render type was introduced in World of Tanks not so long ago. If earlier, on a standard render, "Tanks" went on any vacuum cleaner, now it makes sense to figure out how to carefully adjust the graphics to the system's capabilities. This is what we are going to do with you now.

Minimum system requirements for World of Tanks

CPU: Intel Core 2 Duo @ 2.0 GHz / AMD Athlon X2 2.4 GHz.
RAM: 2 GB.
Video card: NVIDIA GeForce 6800 GT/ ATI Radeon HD 2400 XT 256 MB.

As usual, we remind you that if your computer is weaker even than the configuration presented above, then it is better for you not to even try to run World of Tanks. Otherwise, you can lose your laptop or outdated system unit due to overheating.

Recommended system requirements for World of Tanks

CPU: Intel Core i7-3330 @ 3.4 GHz / AMD FX-8350 @ 4.0 GHz.
The amount of RAM: 4 GB or more.
Video card: NVIDIA GeForce GTX 660 2 GB / AMD Radeon HD 7850 2 GB.

If your PC is comparable or even exceeds the recommended requirements, then, at first glance, you can stop reading further and calmly run to sit at the helm of your favorite tank. However, do not forget that WoT is still an online game, which means that it requires a stable 60 frames in absolutely any situation during the battle. So, it will not hurt you to figure out what and where it is better to turn off (or reduce the quality) away from sin.

And, of course, for those who are between the minimum and recommended requirements, this article will be most useful. That is, those who have a processor more powerful than AMD Athlon X2 2.4 GHz, but weaker than Intel Core i7-3330, and a video card more powerful than AMD Radeon HD 7850, but weaker than NVIDIA GeForce GTX 660, and so on.

World of Tanks graphics settings

The following lists all the image settings in World of Tanks. Some of them affect performance more, some less, and some do not affect performance at all. We tried to briefly describe the essence of each of these parameters, as well as give advice on how to optimize them.

3D render resolution

high.

In essence, this setting allows you to reduce the graphics resolution without reducing the screen resolution, which allows you to leave all interface elements in maximum clarity.

Despite the fact that the weakening of this parameter allows you to seriously increase performance, you should not forget that the appearance of the picture deteriorates just as significantly. Therefore, reduce the quality of the render only if you have a completely antediluvian device, and in this case it is better to just turn on the standard graphics.

Screen resolution

Performance impact: high.

And here it is recommended not to spoil your eyes and never lower the value below the recommended value for your display. But if you play by connecting your computer to a modern TV, you can try setting it to 1280x720 - most TVs, unlike monitors, perfectly reproduce this resolution, even if their native one is higher.

V-sync and triple buffering

Performance impact: low.

V-sync limits the frame rate to the number of Hz of the screen, and triple buffering equalizes it to 30/45/60 in appropriate situations. These parameters have little effect on FPS by themselves. However, if the average frames per second is between 30 and 60, then it is better to turn both settings on so that the image becomes smoother.

Smoothing

Performance impact: average.

Anti-aliasing makes the edges of 3D objects from the perspective currently visible to the player smooth. The technology used in World of Tanks is not known for certain, but, judging by the tests, it “eats” resources not so little, but not too much (7-12 FPS). Therefore, on weak PCs, it is better to turn it off.

Texture quality

Performance impact: average video memory consumption.

The quality of the textures determines the clarity of the appearance of all 3D models in the game. The higher the value of this parameter, the clearer their surface will be. From twisting the slider to the maximum, the game will not work slower, but a lot of video memory will be occupied. Therefore, if you have less than 2 GB, set the average value here.

Lighting quality

Performance impact:

Affects the gamma of the image, as well as the atmosphere of the image due to various dynamic effects such as a large number of light sources, sunlight, optical effects, deep shading, and more.

Even if your video card is quite powerful, but released many years ago, this parameter will affect it quite strongly. In the latest versions of chips from AMD and NVIDIA, the speed of working with complex special effects has been significantly improved, and the impact on performance in the case of them can be considered no more than average. We recommend that you set here average or low values ​​per sample, based on the information above.

Shadow quality

Performance impact: high.

Like in the vast majority of games, shadows are one of the most resource intensive effects in the game. For an online game, super-beautiful soft shadows are not so important, since all the attention of the players is focused on the battle. Therefore, it is recommended to set values ​​​​not higher than average here in order to win a dozen or two FPS at once.

Grass in sniper mode

Performance impact: average.

Most players turn it off, regardless of the configuration of their computer, so that the natural growth of the landscape does not interfere with hanging enemies from a distance. And if you turn it on, then everyone (or almost everyone) will have an advantage, and you will have a random with salt. Yes, and you can lose a lot of personnel.

Extra quality effects

Performance impact: medium or high (depending on the "modernity" of the video card).

This setting affects the so-called particle effects: explosions, flames, dust and smoke in the air. The number of both the particles themselves decreases (the scale of explosions decreases, etc.), and the range of their visibility.

As with any special effects, the impact on performance depends on the "modernity" of your graphics adapter and ranges from medium (5-10 frames) to high (more than 10 frames). It is recommended to set the average value here or below.

Add. effects in sniper mode

Performance impact: average.

As the name implies, this parameter is similar to the previous one, but is applicable only to the sniper aiming mode. Since in this mode the view is very limited, the impact on performance is about average, regardless of the video card.

amount of vegetation

Performance impact: average + average video memory consumption.

With this parameter, you can adjust the density of the grass and the distance it is drawn. In most games, vegetation on the ground has either a medium or high impact on performance. In the case of World of Tanks, it is average, because from every blade of grass here, fortunately, not a shadow falls. Therefore, if you want to add a certain number of frames, you can either turn off the grass completely or set the average value. But you can try high if your "machine" is powerful enough. All the same, the landscape without "bald spots" looks much more advantageous.

post-processing

Performance impact: none or average (depending on the "modernity" of the video card).

Post-processing is cinematic effects that do not load the graphics card too much, like hot air or shading along the edges of objects. However, on outdated graphics chips, FPS can sag quite noticeably. Therefore, we advise you to reduce the quality at least to the middle if your video adapter is more than 5 years old.

Effects from under the tracks

Performance impact: low + low video memory consumption.

If you turn it on, then from under the tracks of your tank (or self-propelled gun) lumps of dirt, dust, snow and water splashes will begin to scatter. It looks nice and eats very few resources. Feel free to turn it on. If you are the owner of the so-called low-end PC, then we remind you that it is better to simply turn off the improved graphics rendering and there will be no such effects in the game at all, and the number of frames will immediately jump sharply.

landscape quality

Performance impact: high.

The name “Landscape detail rendering distance” would most accurately reflect the essence. At minimum values, even at close range, the ground is simplified. Because of this, you can not see any mound that is actually there, and shoot not at the enemy, but at this natural ledge. The trouble is that the Landscape Quality parameter is quite gluttonous, so if you cannot boast of a powerful PC, then you still have to lower it. But don't do it all the way.

Water quality

Performance impact: average.

Water quality refers to the presence of waves in rivers and lakes, the effects of ripples when a tank moves along a ford, as well as reflections of equipment on the surface of a reservoir.

It is worth remembering that whenever you are in the water, you are vulnerable, and dropping frames can further aggravate the situation. Therefore, it is strongly not recommended to set too high values ​​here for any gaming system.

Decals quality

Performance impact: average video memory consumption.

Decals are, roughly speaking, textures on top of textures: traces from shells or caterpillars, dirt, leaves on the ground, and more. The setting affects their number, density and rendering distance. It should be turned on to the maximum only if you have at least 2 GB of video memory.

Detailing of objects

Performance impact: high.

Another insidious setting. On the one hand, it consumes a lot of resources, and on the other hand, it also greatly affects the image quality. Decreasing this parameter reduces the distance at which the 3D models of all objects in the game begin to become easier to draw. If you turn it to the minimum, you can win 15-20 frames, but even up close, most tanks, buildings and other elements of the environment will look terrible. Therefore, try to find a compromise by setting the slider closer to the middle if your computer is not very powerful.

foliage transparency

Performance impact: average.

If you enable "Foliage Transparency", then close to the player, all leaves on bushes and trees will disappear, and remain only at a distance, where their density and number are much less. In this way, you can win 5-10 frames, and the picture will not suffer too much from this.

Tree detail

Performance impact: average.

The same as "Detailing objects", only for trees. Since there are not so few of the latter in World of Tanks, it is recommended to set the maximum value here only to owners of high-performance systems.

Changing the draw distance

Performance impact: average video memory consumption.

All objects, except for tanks and artillery, will not be drawn at long distances if you set low values ​​here. This is highly recommended for graphics cards with less than 2 GB of memory.

Motion blur quality

Performance impact: low.

This effect, as they say, is not for everybody. It does not greatly affect performance, but if everything is really bad with frames per second or you just don’t like it, you can turn it off.

Dynamic change in the quality of effects

A very useful setting. Its essence is clear from the name: as soon as frames begin to sag, the quality of various special effects is immediately automatically simplified for a while.

For mid-range and weaker systems (based on the minimum and recommended system requirements of World of Tanks), this option must be enabled. Those who are absolutely confident in their “game monster” can leave everything as it is, but dying in the midst of a battle once again due to far from the best optimization of “Tanks” is still not a very pleasant prospect. So think carefully about this question.

Tracks from caterpillars

Performance impact: low.

If the "Decals" parameter is off, then tracks from the tracks will not be visible in any case. In general, this parameter does not significantly affect the speed of the game. So try turning it on.

World of Tanks graphics settings table

Once again, we summarize with the help of the table, but this time it does not contain a configuration close to the minimum system requirements. The reason, as mentioned above, is that on such a computer there is no point in poking around in the settings too much, but it's easier to put a standard render.

Click to enlarge

Thanks for reading! Come play World of Tanks at high settings on our main site, but don't forget to be outdoors more often!

How frustrating sometimes it is to miss a frag due to the fact that the game is frozen and the enemy has disappeared. At such moments, I really want to kick the system unit or hit the laptop with my fist. There will be very little benefit from this, it is wiser to just set up the computer once so that the tanks do not lag and enjoy the process. How to set up a computer to play World of Tanks, read below.

Computer settings

Setting up a computer for playing World of Tanks can be divided into two parts: setting up the hardware and working with the operating system. Let's look at each of the parts in detail.

• Hardware setup for World of Tanks

Quite often, good computers show poor performance. The components, it would seem, are an order of magnitude higher than those required, but the FPS stubbornly does not want to jump over the 40 mark. There may be several reasons for this.

First, the housing may be dirty. If the computer or laptop is not cleaned of dust, then it accumulates inside, settling on the cooler and some contact boards. Because of this, the processor cools worse, the parts interact more slowly, the computer heats up.

To increase FPS in World of Tanks, you need to properly clean the case. You can do this at home by unscrewing a few screws. The main thing to remember is that the rags should not be wet, and it is even better to use a special vacuum cleaner.

Secondly, some components could be outdated. Computer requirements in World of Tanks are not very high (see the table), but it may be time to replace the video card or RAM bar. Read more about the selection of parts for a computer for playing tanks in .

• Setting up the operating system for World of Tanks

Often the problem lies not only in outdated hardware, but also in software that requires refreshment. A range of methods can be taken to improve performance:

1. Update video card drivers.

Drivers are special programs that are responsible for the interaction of computer components and the operating system. The newer the video card drivers, the more performance it can give. New versions for NVIDIA and Radeon are released monthly and are available for free on official websites.

1. Clean up the system from unnecessary files.

Gigabytes of unused information is stored on almost every computer. 20 seasons of your favorite series, past games, old working documents - all this takes up space, loading the hard drive. Because of this, the system cannot adequately process data, which in turn leads to a decrease in FPS. The factor, of course, is not a key one, but if you remove all unnecessary, then the game will give out 2-3 fps more.

1. Remove everything from startup.

Startup is a system compartment responsible for launching applications when the computer is turned on. The more applications you turn on, the more RAM will be occupied. This, again, is a drop in performance. You can remove unnecessary elements from there by launching the control panel and selecting the autoload item in it (see the pictures).

1. Close everything except tanks.

This item refers to drastic measures for those who want to direct all the power of the computer exclusively to World of Tanks. By closing the browser and turning off Skype, you can gain a few more frames, especially since the necessary things, like the radio, have long been .

In-game settings

Even if you set up your computer as correctly as possible, you can get adequate results from it only by setting the graphics correctly. In order to start this, you must first open the "Advanced" item in the "Settings" column.

Here you can go two ways:

• Immediately set everything to a minimum and turn it off.

This is a radical method for owners of very weak computers. The game will not look pretty at all, but there will be less lags.

• Selectively disable effects.

Some of the graphical effects in the game are overkill. They add very little, but at the same time "eat" most of the resources. What should be disabled?

1. Shadows. They consume the largest amount of RAM.
2. Dense grass and foliage. Only a powerful video card can draw all the small details. It is better for medium owners to refuse this.
3. Tracks of caterpillars. They are simply useless.

Installing additional software

Even if the above methods did not help, you should not despair. Especially for owners of very bad computers, programs have been developed that completely turn off even more effects.

Wot Tweaker

A comprehensive program that removes effects and compresses textures at the same time. As a result, the graphics drops to the level of 2000, but the performance rises sharply. Download .

Tundra

The Tundra modification for World of Tanks completely removes foliage and grass on the map, in addition, it replaces the standard sky texture with black. It was designed as a mod to make it easier to aim and track enemies, but it also turned out to be a good way to ease the load on the system. Download mod.

Did the article help? Or maybe there is some other way to set up a computer with weak parameters for playing World of Tanks? Share in the comments!

In version 9.0, new graphic effects have been introduced into the game, designed to make tank battles even more beautiful and spectacular.

However, it is important to understand that these innovations will also affect the performance of the game. For this reason, the first time you launch the game after installing Update 9.0, each account will have its graphics settings automatically detected.

In most cases, this is enough for a comfortable game, but if you experience a drop in performance after installing the update, we recommend that you spend a few minutes fine-tuning the client manually.

1. Select the graphics quality from those offered in the drop-down menu, or use the "Recommended" button - the system will automatically select the most suitable graphics quality for the game, based on the parameters of your computer. The values ​​of the "Graphics Quality" setting affect the settings of the "Advanced" tab. Select a value in the Graphics Quality field if you don't want to configure every option on the Advanced tab.
2. 3D render resolution. Decreasing the value of the parameter can increase the performance of the game on computers with a weak video card.
3. Select the size of the game window. If "Full screen mode" is enabled, then the name of the field changes to "Screen resolution". The mismatch between the set resolution in full screen mode and the current resolution of the monitor may distort the image. Increasing the setting increases the load on the video card and may slow down the performance of the game. You can reduce the load on the video card by adjusting the 3D rendering resolution.
4. Enabling full screen mode expands the game to the entire monitor of your computer.
5. Frame rate limited to 60 frames per second. It is used in case of jitter or lag of the image on the bottom of the screen relative to the top.
6. When this setting is enabled, the edges and edges of objects become smoother.
7. Vision angle. The usual viewing angle for a person is about 95 °. The smaller the angle, the closer the objects become, but the peripheral view is reduced. Does not affect game performance.
8. A mechanism for adapting the color palette for people with color perception disabilities.
9. Monitor refresh rate. You can view the monitor refresh rate in the monitor settings or its driver. Please note that the displayed values ​​depend on the current resolution of the monitor. Install monitor drivers to display supported values.
10. If the aspect ratio you set does not match the monitor's current aspect ratio, the image may stretch or shrink horizontally. The setting allows you to equalize the aspect ratio on monitors with non-square pixels.
11. Here you can select a monitor for the game, if you have more than one connected to your computer.
12. Changing the brightness of an image. Works only in full screen mode. Windowed mode uses the current operating system settings.
13. The color filter allows you to choose the visual design of the game from the proposed options.
14. Moving the slider changes the visibility of the selected color filter in the interface. The figure above shows the changes.

If you need more fine-grained graphics settings, go to the "Advanced" tab. Please note that most of the settings below are only available for the Enhanced Graphics renderer.

Some settings and their values ​​are not available for standard graphics.

Settings that significantly affect the performance / performance of the game are placed in a separate block "Significantly affecting performance". They are labeled 3–7 and 12–16 in the image.

Lowering or disabling these settings can significantly improve game performance.

Here it is important to pay attention to some points:

1. By choosing from the two proposed graphics quality options, you predetermine the choice in the remaining categories in this tab.
2. The quality of textures does not depend on the performance of the card, but it is demanding on video memory.
3. The performance of the game with this setting depends on the power of the video card.
4. The quality of the shadows is highly dependent on the overall system performance, affecting both the graphics card and the CPU.
5. It is recommended to disable this option if performance drops in sniper mode.

1. Here you can adjust the display of smoke, dust, sparks, flames, explosions, etc. All these objects depend not so much on the video card, but on the CPU.

1. Various additional graphic effects: air refraction, bloom effect, etc. It strongly depends on the performance of the video card and moderately on the amount of video memory.

Items 8–19, 21 have little effect on the performance of the game, which means that when setting values, you should be guided by your own wishes for the quality of each element (water, trees, landscape, etc.).

Many users will benefit from item 20 "Dynamic change in the quality of effects" - automatic simplification of effects when system performance drops.

Enabling the option will allow the game to adjust to the speed of your computer.

The most popular game, "Belarusian miracle", the game of all times and peoples. As soon as they did not call the online game World of Tanks. And there were reasons for that. How could it happen that a game from a little-known Wargaming studio, located in a little-known country, gained wild popularity in a year? Nobody has an answer to this question.

By the way, "Tanks" still holds the Guinness Book of Records as the most successful game that has gained popularity in the shortest period of time. The success of "Tanks" has not yet been able to repeat any game, even from the most famous studios.

However, with each update, it becomes more and more difficult to "roll in tanks" as the system requirements of the game grow. Now, without the correct graphics settings, it is not possible to play normally and "bend over". Therefore, we will try to figure out which graphics settings in World of Tanks are optimal for successful battles.

What you need to know about system requirements

System requirements in "Tanks" are not moderate. In order for the game to function at maximum settings, a very powerful computer is required. And the more powerful, the better. For a comfortable game requires an impressive number of frames per second. Without this, it will not be possible to conduct effective battles.

The video card requirements are even higher. Ideally, the user should have an NVidia 1080. Then we can talk about high-quality and productive graphics. Setting the graphics in World of Tanks can load even a very powerful machine to the fullest.

No less requirements are placed on the processor and RAM. A comfortable game requires at least the latest generation Intel Core i3 and 8 gigabytes of RAM. Without this, the game will terribly slow down. And in "Tanks" a split second is everything. But the optimal graphics settings in World of Tanks allow you to somewhat reduce the load on the processor and RAM. Therefore, it is important to be able to properly set the graphics.

General settings

Let's move on to the "Tanks" graphics settings. And the first section is called "General Settings". They also affect the graphic component of the game. Therefore, you need to be able to configure them correctly.

So, setting up graphics in World of Tanks begins. First of all, turn on the dynamic camera and horizontal stabilization in sniper mode. This is absolutely necessary for a comfortable game. But it is better to turn off the effect of optics, because there is zero sense from it, and the iron loads.

Screen settings

They depend on the type of monitor you are using. These include screen resolution, refresh rate, aspect ratio, and other options. For a comfortable game, you need to enable dynamic change, set the resolution of the 3D render to 100 percent and turn off Anti-Aliasing, also turn off. This is how we improve the performance of World of Tanks. The maximum graphics settings are not always good for this or that equipment.

The screen settings must be carefully considered, as incorrect ones can affect vision. Especially if you are still using an ancient CRT monitor.

Remember that the optimal frequency for such monitors is 75-85 hertz. If you have a modern LCD screen, then we leave the standard 60 hertz and do not bother. Proper screen setup will help you enjoy the game and not plant your eyesight.

Graphics settings

Here we come to the essence. It is these settings that determine the quality of the image and the performance of the game as a whole. Immediately go to the "Advanced" tab and turn on the standard graphics mode. Set the texture quality to "High". This is quite enough.

Disable unnecessary effects: grass in sniper mode, caterpillar effects, foliage transparency, dynamic change in the quality of effects and caterpillar tracks. You can play normally without these "beauties". Setting up graphics in World of Tanks is a delicate matter that does not tolerate excesses.

All other sliders are set to the "High" position. In addition to water quality, landscape, details and additional effects. You can turn them off altogether. This will help improve the performance of the game several times over. This is the basic graphics setting for the World Tanks laptop. All sorts of "pretty" and effects for laptops are detrimental.

Why not use enhanced graphics?

The fact is that such improvements are only possible for computers with top hardware configurations. Most users can only dream of such a quality of settings. Not to mention laptop owners. If you do not have a top PC, then it is better not to even look at the settings for improved graphics.

The same applies to the type of downloaded client. There are SD versions - with normal resolution textures and HD - with high resolution textures. Which type of client to choose for a more comfortable game is probably not worth explaining. And so it is clear. Graphics settings in World of Tanks will be much better in the absence of high-resolution textures.

What else do you need to know?

In any case, medium settings are enough for a comfortable game. And some effects and "beautifulness" can be turned off altogether. Don't get fooled by graphic improvements like "Track Tracks". They only load the computer. Do not install any mods to improve graphics. It is proved that with them the performance of the game only drops. Do not use all sorts of "boosters" video cards. This is a direct path to getting a burnt video card.

It would also be nice to clarify the capabilities of your video card on the official website of the manufacturer. Knowing its characteristics, you can experiment with the settings and customize the game "for yourself." But the main thing here is not to overdo it.

In any case, it is worth knowing the characteristics of your computer as a whole. For without this knowledge, it will be impossible to set up the game for maximum performance. And that is exactly what we are striving for. "Tanks" is a very capricious game. It requires an appropriate level of iron and fine tuning.

Conclusion

All of the above settings will help you achieve the maximum frame rate during the game. Also, productivity will immediately increase, as the reaction will increase. Either action will take less time.

As a result, you will be able to "bend over" more effectively. Especially if you have a "pumped" gaming mouse with a good response. Without this, it will not be possible to successfully ride in "Tanks".