How to properly adjust the scope from sae. Which auto-aim is better for World of Tanks

The ProAIM scope includes several cheating features designed to make life on the battlefield easier.

Features of the ProAIM scope

• Lead calculation. In the standard mode, the lead is not implemented at all, because the sight is always aimed at the enemy vehicle, regardless of whether it is moving or standing still. ProAIM solves this problem by automatically calculating the lead to the target. In this way, in most cases, you will successfully fire even at the fastest target.
• Choice of one of several aiming points. With the Numpad9 and Numpad6 buttons, you can change the points where the fire will be fired. This can be the bottom of the hull (the weakest part of most tanks), the turret, or the center of the hull.
• Indication of an unreachable target. Another useful feature - if the projectile does not hit the enemy due to an obstacle, then three red stars will appear on the screen.
• Smart target acquisition. Previously, you had to look for a visible part of the enemy vehicle in order to activate auto-aim, now you just need to right-click in the area where the tank is standing (there is a small radius near each vehicle). Auto-aim can be activated even on a target behind an obstacle!

Mod settings can be changed by editing the lsdmax_proaim.xml file located at res_mods\1.4.0.0\scripts\client\mods\.

Installation

In the World_of_Tanks\res_mods\1.4.0.0 folder, extract the contents of the mod, the scripts folder.

Autoaim from Sae is a full-fledged aimbot for World of Tanks, which has the ability to autoaim at some parts of the tank, while autoaim also captures the target even when it is behind an obstacle.

Update from 09/17/19

• Adaptation for patch 1.6.0.7

Of course, wot initially has auto-targeting, but it is so simple that it is only suitable for beginners or in dynamic close combat, when players do not stand still, but move. A standard aim simply captures a target that is in plain sight and that's it, the sight is aimed at the center of the tank, and this is ineffective and often not needed at all. Moreover, it is simply impossible to hit a moving target in this way, because you still need to calculate the lead.

But with Sae's auto-aim, things are a lot easier. Aimbot can capture a target even when it is behind an obstacle, you just have to wait for this enemy to appear in sight and that's it, because the sight will always aim at the enemy. Also, the cheat auto-aim is able to take lead on its own, so even if the tank is in motion, you will always hit it, the cheat will automatically calculate the necessary lead.

In addition, it is possible to choose where the sight will be aimed, it can be a tower, hull or tracks. All this can be switched while in the battle itself. This is necessary so that when the enemy tank peeks out a little from behind cover, you can hit it without any problems, but in your favorite case, you can turn off the auto-aim and shoot at the area that peeks out.

Even in this auto-aim there is an auto-shot function. Auto-shot together with an aimbot work wonders, just select a zone, for example, a tower, turn on auto-aim and auto-shot, and just take out opponents one by one. This feature greatly increases your skill. Initially, it is disabled, you can enable auto-shot in the settings. In general, auto-shot in World of Tanks is already really cheating, and many even think that playing with it is boring. Judge for yourself, the cheat shoots and aims for you, and you just drive. But if the statistics and bending of everyone and everything is in the first place for you in tanks, then we turn on these two cheats and go ahead.

The autoaim cheat has a huge number of settings. Understanding them is not so easy, and if the ability to configure the buttons to enable / disable is already clear, then the various sliders for auto-guidance are already more difficult, you will first have to play with the standard settings, and only then adjust everything for yourself. Fortunately, the settings in the cheat are available directly from the hangar, or from the battlefield.

Initially, you can not configure anything, but immediately go into battle! Part of the functionality of the cheat is already working and quite well. Capture everything also on the right mouse button. Here are the standard keys for controlling auto-aim in battle

Hotkeys in combat

Right mouse button - ON / OFF auto-lock target
NUMPAD 0 - ON / OFF mod
NUMPAD 5 - Capture the center of the tank
NUMPAD 8 - Tower Capture
NUMPAD 2 - Caterpillar Capture
NUMPAD 7 - Call settings menu

To launch the settings, click the corresponding button in the lower right corner of the hangar (next to notifications).

Then a settings window will appear where you can configure the modification in more detail.

By the way, when capturing a target, the auto-aim circles around the enemy tank, and also displays its speed and distance, which is also convenient information. You can see it in the screenshots below.

Warning: This mod is prohibited. And although you will not automatically get banned, but if you brag about screenshots or videos that show your nickname and that you are with cheats, then you may be banned!

Also pay attention to the fact that there are different versions of the cheat in the archive. They are all working and differ only in functionality and some modifications. You can try each. But usually you can just install the latest version and that's it.

With this scope, the effectiveness of a tanker on the battlefield will increase several times, because cheating capabilities give a huge advantage over the enemy.

Review

A few years ago, no one would have thought that a lot of cheat modifications would be created for World of Tanks, but now there are a lot of them. One of the main such mods are auto-aims, which provide the player with a lot of opportunities. Now you do not have to wait for the enemy to appear in the line of sight to capture him, you do not need to frantically calculate the lead, the auto-aim will do everything by itself!

• Capturing targets located behind obstacles. Without a cheat, you can turn on auto-aim only when you see the silhouette of the enemy, now just right-click near the enemy and the sight will automatically take the target. Even behind cover!
• Automatic advance. The standard sight does not calculate lead at all, because it always looks at the enemy tank, but the option from Sae allows you to hit even a fast-moving tank. The mod itself switches between melee and ranged combat modes.

• The most useful feature is the choice of the point where the sight looks, a function is implemented in the form of an alternative mode, which can be turned on by pressing ALT + right mouse button. In this mode, you can select a particular point in the enemy's armor, for example, a turret, rollers or a side. The mod will remember this point and will try to hit it when fired. But there is one small minus, when the alternative mode is activated, the two previously listed functions are disabled, so you have to choose what is more important to you. I advise you to combine it with this auto-aim in order to immediately see the weak zones of enemy equipment. Or you can use , then the enemy will have little chance of survival.

In some cases, when several enemy vehicles are close at once, there may be a problem with unwanted switching of auto-aim to another tank, if this happens, press the E key, which disables aiming.

Thanks to the Smart auto-aim for World of tanks 0.9.18, it will become much easier to deal damage to the enemy, because he can shoot ahead of the curve, regardless of the distance to the target (the sight itself switches between short and long-range shooting modes automatically), and this will obviously help in battle and now fast enemy fireflies will not carry such a threat for you. This is not the only advantage of this cheat, it also looks for vulnerabilities in the enemy tank, which is why you will not be afraid of well-armored opponents. The mod has an alternative mode - selecting a specific point on the vehicle (activated by pressing ALT + RMB) and the auto-aim will always be reduced to this place.

Setting
All scope settings are default. You can customize it for yourself using Notepad ++ in the file
res_mods\0.9.x\scripts\client\mods\auto_aim.xml
It is possible to change many parameters. So, if you don’t like the sight, then don’t rush to remove it, but try experimenting with the settings.

Installation:
Copy the contents of the archive to World_Of_Tanks/res_mods/.