Plaque on an acrylic bath. How and how to wash an acrylic bath without damaging it

Acrylic bathtubs are in great demand due to their hygiene, lack of corrosion on their surface. But acrylic has its drawbacks, primarily the requirement for careful care for it. How to clean an acrylic bath at home worries many housewives. Caring for her can be called a whole science. If you take care of the bathroom correctly, then it will delight you with its snow-white color for a long time.

Acrylic Bathtub Cleaners

Detergents for cast iron will not work here. Do not choose an acrylic bath cleaner that contains:

• acetone;
• chlorine;
• ammonia;
• formic acid or any other.

Acrylic tanks should not be washed with boiling water and products with ammonia, formaldehyde and other corrosive elements. So you damage the surface, and it is quite expensive to restore it. It is necessary to choose high-quality products that will be completely safe for the surface, while cleaning it quickly and easily.

Let's take a look at what you can choose a reliable detergent and why:

Now you know how you can clean the surface of acrylic, but here's how to clean an acrylic bath at home - this is also worth finding out.

The use of detergents

They must be used strictly following the instructions. It's simple with abrasives - apply and wash until the bathtub finally shines. But sparing gels are usually used as follows:

• apply the gel to the entire surface with a sponge or use a spray bottle;
• notice ten minutes - usually this is enough for an impact, but look at the instructions first;
• wash off the dirt along with the gel with jets of warm water and a sponge;
• to be sure, rinse the tub again and wipe it dry.

Features of care

Such baths require careful attitude. For example, you should not wash them more than twice a week with an acrylic bath cleaner. After each use, you need to rinse the walls with water and wipe with a sponge. Several times a week it is necessary to wipe with soapy water, and then wipe dry with a dry soft cloth.

There should not be even a drop of water, then the washing tank will not be covered with a yellow coating. But this material is not subject to corrosion - this is a definite plus. If the plaque is nevertheless formed, it is worth washing it off with other cleaning products.

Folk remedies

They will cost you less, in addition, you will not doubt their composition. Therefore, many housewives resort to such care for an acrylic bath at home.

Washing the bath is very simple with ordinary wine vinegar, diluted with water. The mixture is safe, but the effect of it is no worse than that of expensive drugs. But such a composition can only cope with soap stains, but if the surface has already turned yellow, then try another option:

• fill the tub with warm water;
• pour one and a half liters of vinegar there and leave overnight;
• rinse with water, rinse the surface with a sponge.

Often, rusty stains from flowing water remain on the side of the bath. Acrylic is not exposed to rust, plaque remains from the current tap, so its condition must be monitored and changed in a timely manner. It's easier than getting rid of rust. But if it was not possible to prevent its appearance in time, then you can also resort to folk methods. For example, the following rust remover will help:

• dilute citric acid in a glass of water, pour into a filled tank;
• after ten minutes, drain the water;
• rinse the surface with a sponge, wipe.

City water contains rust and various salts, because of this, the bathtub often turns yellow. Another effective method of dealing with yellowness is table vinegar paired with oxalic acid. Warm the water slightly, add these two components to it. Wipe the yellow spots with this composition, wash them off after ten to twenty minutes.

Prevention and disinfection

If the acrylic is of high quality, then it can last thirty years, remaining as good as new. But such an effect will be only with careful operation. Not in an acrylic container:

If you follow the weekly washing schedule, do not allow damage, then everything will be fine with her. Before installing a new bathtub, plumbers are advised to change the water pipes as well to avoid the appearance of a yellow dress. And although the smooth surface is not subject to corrosion and attacks of fungal diseases, once a year it is necessary to carry out disinfection without fail.

How is disinfection carried out?

For disinfection, you can use the Czech Ravak Desinfectant, which is distinguished by quality and safety. So you will have no doubt that the container is disinfected and you can bathe in it yourself and bathe small children there. The tool is very easy to use:

• draw water into the tank;
• dilute a part of the product in ten parts of water and pour it into the collected water;
• leave for ten minutes, not forgetting to mix;
• rinse with clean water, helping yourself with a soft sponge.

The product has an economical consumption, because it is often not necessary to disinfect the acrylic surface. But with it, you can process the entire bathroom. The main rule is to dilute it with plenty of water!

Of course, you will have to use trial and error to find the only detergent that will completely suit you both in terms of quality and safety, and will not repel you with an unpleasant pungent odor. But if it is not possible to buy expensive vials of chemicals, you can always resort to folk methods, which are also famous for their effectiveness.

Each tool has its own advantages and disadvantages, directly related to its composition. It is simply impossible to name the optimal composition. The main thing is not to forget to make sure that the composition does not contain acids, ammonia and chlorine, which are contraindicated for acrylic surfaces.

If you regularly maintain cleanliness in the bathroom, then no plaque and rust will form there. After all, swimming in a snow-white container is much more pleasant than in a yellow and unkempt bath. Therefore, twice a week, always pay attention to the surface of the acrylic, rinsing it with water jets and a sponge, and then wiping off the remaining droplets.

Attention, only TODAY!

Acrylic bathtubs have recently become popular and have taken the place of the previously widely used cast-iron structures. Such a product captivates with its lightness, as well as its sophisticated forms. But at the same time, quite often the owners of such plumbing do not know how to clean an acrylic bathtub so as not to harm its appearance.

What is acrylic?

For the manufacture of acrylic bathtubs, plastic is used, which is characterized by significant hardness and wear resistance. The surface of such products has a dirt-repellent effect, which prevents the development of harmful microorganisms. This material has been widely used in the field of dentistry in the past. Thanks to new technologies, its price has dropped significantly. Therefore, the material began to be actively used in the production of sanitary ware.

Acrylic bathtubs are resistant to impact, but are subject to small and minor scratches. Their high-quality cleaning depends not only on which cleaning agent was chosen, but also on compliance with the basic recommendations for the care of acrylic. In order for the bath to serve for a long time and not lose its whiteness and integrity, you should not bathe pets in it, as well as arrange a warehouse of basins and buckets. Metal objects and other utensils can damage its surface, leaving visible scratches.

Acrylic Bathtub Daily Care

Acrylic bathtub does not require special care. It is enough to rinse it after each use with clean running water, without using aggressive cleaning agents. For acrylic baths, you can purchase special "chemistry". Of course, they also effectively fight pollution, but they are not cheap. In addition, it is not recommended to constantly expose the acrylic surface to chemical cleaning.

Many do not know how to clean an acrylic bath. It turns out that to carry out such cleaning, it is enough to purchase a soft cloth or sponge. It is also necessary to use soap or a special detergent for acrylic products. For daily care, it is enough to clean the surface of the bathtub with a soapy sponge to remove possible contamination. You can even just rinse it with clean running water and completely remove moisture. With such care, no traces of rust or plaque will appear on the surface.

If such pollution nevertheless takes place, then how to clean the acrylic bath in this case? If the usual methods do not help, you need to choose special cleaning products.

What care products to use?

Before we tell you how to clean an acrylic bath at home, we note that you need to remember some important rules. It is important to observe accuracy and discretion in the process of processing the product. Avoid using cleaners that contain abrasive elements, as well as pastes and powders with the presence of ammonia compounds, chlorine, alkali and acid. You need to be aware that such substances can damage the outer coating of the acrylic tank, cause small cracks and scratches, and provoke discoloration. Therefore, before deciding how to clean an acrylic bath, you should carefully read the composition of the powder or paste. Avoid using metal brushes. Cleaning tools that are too hard cause scratches and damage the finish.

Overview of cleaning products

Every hostess thinks about how to clean an acrylic bath. Luckily, there are a lot of special tools out there. "Acrilan" - cleaning foam that easily removes various types of dirt (soap stains, limescale, rust). The tool can easily cope with all types of stains. The advantage of this product is the formation of a protective film on the acrylic surface, which prevents further accumulation of plaque. But never leave the foam to dry completely on the surface of acrylic products, and do not mix it with other products. Use gloves during cleaning. Keep away from children.

Cif is the optimal cleaning agent that is suitable for the care of all plumbing fixtures. The composition does not contain abrasive substances. Therefore, the acrylic surface is not threatened by the loss of gloss and integrity. The tool is available in several forms - cream, paste, spray.

Bass is a liquid for cleaning sanitary ware in the bathroom. Suitable for daily use.

Tim-Profi is a detergent designed for cleaning acrylic surfaces. Among the main advantages are environmental friendliness, the ability to destroy unpleasant odors, and the removal of significant contaminants. The agent gives the cleaned surface shine, and also forms a special protective layer.

"Cinderella" is an effective preparation for cleaning acrylic products. An ideal option for those who cannot decide how to clean an acrylic bath. Among the shortcomings is a pungent odor that appears directly upon spraying. In the process of processing, it is recommended to use not only gloves, but also a mask. The product must be sprayed onto the surface of the acrylic bath and left for 7 minutes. After the specified time, rinse the preparation with running water, wipe the bath with a soft cloth.

"Chister" - a cleaner for acrylic baths, which is also suitable for other plumbing items. Ideally removes limescale, rust, grease stains and soap stains, gently cleans the surface without causing mechanical damage. The composition of the drug includes an acrylic polymer, which acts as a barrier to further adhesion of dirt to the bath. The product protects against the appearance of fungi and bacteria. The bath will please the owners with cleanliness in a couple of minutes.

So, we discussed how to clean an acrylic bath. Let's talk about possible ways to use detergents. Familiarize yourself with the basic rules for using cleansers. Usually the manufacturer places recommendations directly on the package. The basic rules of application are as follows:

Folk remedies for the care of acrylic bathtubs

If there are no detergents, and you don’t know how to clean an acrylic bath at home, feel free to trust people’s advice. Such funds do not have negative properties and do not harm health:

What do the owners of this kind of plumbing say? How to clean an acrylic bath? Reviews on this subject are very different. However, regardless of whether you read a positive or negative comment, you should know that all products correspond to the qualities declared by the manufacturer. It is important to choose the optimal detergent that is suitable for your bath, taking into account the characteristics and characteristics of the water. The effectiveness of the tool depends on the frequency of use. For example, with heavy contamination, it may be necessary to use the product twice to achieve a perfectly clean surface. Taking into account all the above information, you can easily determine how to clean the acrylic bath so that the product lasts a long time.

Acrylic bath is convenient, stylish, comfortable and inexpensive. That is why an increasing number of people prefer acrylic bathtubs to products from another material. One of the main advantages of acrylic is its lightness. An acrylic bathtub can be moved independently if desired - its weight does not exceed 30 kg. In turn, the cast-iron bath will have to be pulled by the efforts of several adult men.

Acrylic bath is suitable for any interior - thanks to the plasticity of the material, acrylic can be used to make products of any shape and color. Acrylic, in addition, has poor thermal conductivity. This means that a full bath of hot water will take longer to cool, which is important. The acrylic bath is very pleasant to the touch - it has a smooth, even surface. If necessary, if the bath is scratched or damaged, the defect can be eliminated by treating the area with liquid acrylic.

For the sake of fairness, I would like to note that acrylic has its drawbacks. One of the main ones is the impossibility of cleaning it with abrasive detergents. Any aggressive components can destroy the acrylic surface. To keep your new bathtub looking its best for as long as possible, you need to know how to take care of it.

How not to clean an acrylic bath

Before you start cleaning plumbing, it is important to indicate how this should definitely not be done. When cleaning the tub, never use hard sponges or abrasive cleaners. The smallest particles leave scratches on the surface of the bath, which spoil the appearance of the product. Of course, the bath can later be polished and get rid of unpleasant scratches, but this is a very long and painstaking task. And in general, trouble is better to prevent than to correct.

Do not use any chlorine-containing detergents. Chlorine acts very aggressively on acrylic, the surface darkens, becomes porous. The same effect is obtained when cleaning the bath with ammonia, acetone and formaldehyde products. Be careful when choosing acrylic cleaners.

How to wash an acrylic bath

It is best when buying a detergent for cleaning an acrylic bathtub to find a label on the package confirming that this composition is safe for acrylic. Today, almost any manufacturer of detergents have bath cleaning gels in their line.

1. To begin with, the bath is poured with warm water to prepare for the upcoming cleaning.
2. The selected product is applied dotted in several places on the surface of the bath, as well as on a soft cloth. Never use sponges, especially hard ones.
3. It is best to carry out manipulations with rubber gloves so that the detergent does not dry the skin.
4. After that, you need to wipe every centimeter of the acrylic surface with a rag, thoroughly cleaning all dirt.
5. If you have tough stains or rust marks on the surface of your tub, you can remove them with a household acid such as vinegar or lemon juice. Pour vinegar, freshly squeezed lemon juice, or diluted citric acid over the dirt. Leave on for 15-20 minutes, then wipe with a cloth. The procedure can be repeated several times until the acrylic is completely cleansed.
6. If acetic and citric acid do not help, alcohol can be used. It also removes some types of stains very well.
7. After thorough cleaning, you need to leave the bath for an hour, and then wash off the soap composition.
8. After washing, wipe the bath dry, after which it can be used for its intended purpose.

Such a washing algorithm will allow you to clean the bath from various contaminants and not damage the acrylic surface.

There are some nuances, the observance of which will allow you to keep the shine and cleanliness of the acrylic bath for many years.

1. Severe pollution should not be allowed - order should not be restored, but maintained. With timely cleaning, you do not have to resort to special detergents. It is enough once a week to lightly wipe the bathtub with a soapy cloth to make it shine like new.
2. An acrylic bathtub does not require abrasive cleaners, not because they damage its surface, but because acrylic does not need it. The special surface simply does not allow contamination to be absorbed into the structure of the material, the stain remains on the surface and is easily removed.
3. If regularly rinsed with hot water, the bathtub will retain the luster of its polished finish.
4. Before cleaning the bathtub with any household chemicals, first apply a little soapy composition to a small area of ​​the bathtub. This will allow you to check the reaction of the surface to the components of the detergent.
5. To prevent rust stains from forming on the surface of the bathtub, repair all faucets and close them tightly.
6. To restore the lost shine of the acrylic surface, wipe the bathtub with a special composition for polishing furniture. It will hide all the smallest scratches and instantly transform the surface.
7. If you are bathing animals, be sure to place a rubber mat on the bottom to protect the surface from scratches from claws.
8. Do not place metal basins and buckets in the bath so as not to damage the surface. It is best to use a plastic container.

How to get rid of scratches on acrylic

It is not always possible to protect the bath from damage. Careless dropping of metal objects or overzealous cleaning may scratch the acrylic surface. But this can also be dealt with.

Acrylic scratches appear as easily as they are removed. Therefore, you shouldn't worry too much about them. Small scratches with a depth of less than a millimeter are perfectly eliminated with an ordinary piece of felt, without special trowels. Take a piece of felt and rub it over the scratches until they are invisible. It usually doesn't take long.

Deep scratches and damage can be repaired with liquid acrylic. It is sold in hardware and hardware stores and is a paste. Liquid acrylic is applied to the surface of the bath according to the instructions, after which you need to wait for it to dry completely. Then the surface of the bath is polished with the same felt to achieve a smooth and even layer. Liquid acrylic can be not only white - you can easily choose a shade that suits your bath.

An acrylic bathtub can be repaired even if you have a through hole. But only if your tub is pure acrylic, not acrylic-coated plastic. To do this, the bath on the reverse side is sealed with adhesive tape for fixation. Then liquid acrylic is applied from the inside so as to fill the hole. After it hardens, the surface is leveled and polished. This procedure can be performed independently, it is not necessary to call a master for this.

Bath acrylic is a modern, durable and comfortable material that allows you to implement the most daring design solutions. Proper care of an acrylic bathtub will allow you to keep its beauty and shine for many years to come.

Video: how to wash an acrylic bath

Practical and durable acrylic bathtubs are often installed in modern apartments, but the polymer quickly loses its appearance with improper care. To maintain a sparkling whiteness and prevent cracks and scratches, you need to properly care for your acrylic bathtub.

Advantages

Caring for modern plumbing is different from the usual washing of cast-iron and metal bathtubs. With a careful attitude, acrylic products delight their owners for at least three decades. They favorably differ from the old bulky baths in their lightness, variety of models, sparkling whiteness of the coating, the ability to retain heat for a long time, resistance to corrosion, and the absence of mold and fungus.

Care

Acrylic can be scratched while bathing pets. Metal buckets and basins, hard brushes and washcloths will damage the polished surface. The use of detergents with abrasives and chlorine also adversely affects the quality of the acrylic coating: it becomes dull, loses its attractive sheen.

Attempts to wash the bath with gels containing solvents and ammonia will result in damage to the top layer: at first it will become cloudy, and with frequent and prolonged contact with these substances it will deform.

The capricious polymer does not even tolerate soaking laundry. Powder, stain removers used in washing are harmful to a fragile snow-white bath. Microcracks resulting from improper operation and maintenance are not only unaesthetic, but also contribute to the further destruction of the bathtub coating. Plastic does not tolerate exposure to high temperatures.

Cleaning products

In order for the bathtub covered with acrylic to remain snow-white, it is necessary to clean it properly every day, not to neglect the prevention of pollution. The smooth surface of the polymer does not absorb dirt, so it is enough to wash it with a soft sponge with soap and rinse under running water. So that drops of water, drying, do not leave marks, you need to wipe the coating with a dry cloth. If there was no time for these simple actions, and yellowness and limescale still appeared on the surface of the bath, you should use products designed specifically for cleaning acrylic bathtubs. The quality of funds from well-known manufacturers is beyond doubt:

• "Ravak" - a line of products designed for cleaning, disinfection, elimination of especially strong pollution, restoration of the protection layer.
• "Acrilan", gently acting on the surface, removes soap and limescale, rust and mold, and also forms a protective film, giving extra shine.

• "Tim Profi" copes well even with old pollution, restores shine and radiance, fights unpleasant odors. In addition, it is necessary for the care of a hydromassage bath. In order for the mechanism to work for a long time, it must be cleaned in a timely and high-quality manner.

• Bass effectively cleans acrylic bathtubs and showers.
• Cif universal cream is also suitable for cleaning acrylic products. With it, you can get rid of yellow plaque, and rust, and lime deposits.
• "Acryl Polish" - a line of products for the care, repair and polishing of acrylic coatings.
• "Mr. Cleaner" is a wonderful budget option that not only copes with various kinds of pollution and effectively fights bacteria, but also protects the top layer of the bath from fungus. It coats the surface, thereby preventing dirt from accumulating on the acrylic. After applying "Mr. Chistera", the bath will remain snow-white for a long time and retain its shine.
• Bon Professional has similar properties. It also forms a special film that prevents dirt from settling on the tub.

Liquid detergents are applied with a soft sponge, sprays are sprayed onto the surface of the bath. After a certain period of time specified in the instructions for use (usually from 5 to 20 minutes), the product is washed off with water. Some gels and liquids for washing acrylic bathtubs can also be used to disinfect them (for example, Team Pro, Ravak Desinfectant). After filling the bath with water and adding a disinfectant, you need to wait about 10 minutes, then drain the water, rinse the bowl thoroughly.

For daily cleaning, ordinary dishwashing gel is quite suitable, and old limescale will have to be dealt with with the help of gels and creams specially designed for this purpose: Sanfor, Gel WC 5+, Ravak Turbocleaner.

Folk remedies

To wash an acrylic bath at home, some folk methods will help:

• An indispensable assistant in removing limescale is citric acid. The bath should be filled with hot water, add a couple of bags of this product. After a few hours, rinse the acrylic surface with running water, wipe with a soft cloth. Cleaning with citric acid should not be repeated often, 1-2 times a year is enough.
• To remove stains from acrylic, ordinary toothpaste with a whitening effect is able to.
• A mixture of ammonia and hydrogen peroxide helps get rid of yellowness.

• A slurry of soda and water can clean off rusty spots. It is enough to apply it to the pollution, then gently rinse. Keep in mind that rubbing the surface of this polymer is strictly prohibited.

• Table vinegar copes with many types of pollution. 1 liter of the product is poured into a bath filled with warm water. In the morning, it is thoroughly washed with a soft sponge, rinsed under running water and wiped dry.
• If a solid layer of limescale and water stone has formed on the surface of the bath, then a slurry of washing powder, water, 2 tablespoons of Whiteness and a tablespoon of vinegar will help remove it. Apply the composition for 20 minutes, then wash the surface with a soft cloth or sponge, pressing lightly. At the end of the cleaning, the area to be cleaned must be thoroughly rinsed under running water.

Cleaning after repair

Sometimes the need to wipe stains from plastic arises immediately after the installation of plumbing or after repairs in the bathroom. To wipe off the sealant, you need efficiency. Until it hardens, it can be removed with a rag and washed with a detergent. If the silicone layer has already hardened, it is better to give up trying to remove it with all sorts of solvents and acetone dangerous for acrylic.

Dried sealant must be removed mechanically very carefully: with a blade, clerical or construction knife.

Removing the primer from the polymer surface is also not easy, especially without the help of chemicals harmful to it, such as white spirit and acetone. One option is to try to remove the stain mechanically, after softening it. Hot water is poured into the bath, drained after a quarter of an hour. This procedure must be repeated several times. As a result, the primer softens a little, and you can try to rub it off with a blade or a clerical knife.

You need to be extremely careful, as the risk of damaging the plastic is extremely high. Acrylic can lose its luster, become matte.

Acrylic bathtubs are very popular among connoisseurs of comfortable conditions. The innovative piece of sanitary ware is heat-resistant and does not corrode. Acrylic requires proper care. Cleaning a bathtub is not difficult if you do it daily. The main thing is to choose the right funds. We will analyze the details in the article.

How and how to clean an acrylic bath without damaging the surface

Acrylic is a wear-resistant inert material. Widely used in the manufacturing industry. Acrylic plumbing looks chic, but there is a significant drawback. The material is not very durable - easily damaged.

Daily maintenance of plumbing will keep the bath in good condition. The delicate surface will not withstand caustic powder cleaners, abrasives, chlorine, alkali and acid. After such processing, scratches remain on the coating, and the bath irrevocably loses its original appearance.

Do not use metal-based brushes, so as not to spoil the coating. Do not place hard objects on the bottom of the bath: buckets, basins, stools. It is not recommended to bathe pets in an acrylic bath. Even a child can scratch the delicate coating, not to mention cats and dogs.

Care products for delicate sanitary ware should have a liquid consistency. In the absence of a professional tool, we will use, for example, shower gel.

We follow the sequence of actions:

• distribute the liquid substance over the surface of the plumbing with a soft sponge;
• wait five minutes until the surface gets wet;
• rinse with warm water, helping with a soft material;
• evaluate the result, if necessary, repeat the procedure;
• dry the bath with dry napkins;
• rub the surface of the plumbing with a soft cloth for shine.

Rules for the care of a delicate bath:

• After each use, rinse the plumbing item with warm water and a soft sponge.
• After cleaning the surface, wipe the bath dry.
• Do not soak dirty laundry in the container.
• Eliminate cleaning products containing unacceptable chemicals.
• Once every ten days, we treat the surface of the bath with approved chemical solutions.
• When bathing pets, lay a dense material on the bottom.
• When buying a detergent, carefully read the composition.

Acrylic has a dirt-repellent property. Daily care will allow you to maintain the appearance of the bath for a long time.

How to properly wash an acrylic bath: video instruction

In a short video, a housewife shares the secrets of keeping an acrylic bathtub clean and tells you about the rules for caring for delicate sanitary ware. What detergent is best to use:

Acrylic bath cleaners. Is it possible to use Domestos

In specialized plumbing stores, you can get advice on professional products designed to clean capricious coatings:

A universal tool that allows you to tidy up the entire personal hygiene room. The composition does not contain abrasive elements. There are no difficulties in application. Spray the product evenly over the entire surface. Wait a few minutes and rinse thoroughly.

Team Pro

The tool is perfect for any acrylic surface. An environmentally friendly product will save plumbing from unpleasant odors and from persistent pollution. After processing Team Pro, a dirt-repellent layer is created on the coating, giving plumbing items shine and novelty.

Acrylan

Specialized foam that cleans acrylic sanitary ware from difficult formations and old stains. After processing, a protective film is formed on the surface of plumbing fixtures, protecting the delicate coating from the re-formation of water stone.

Cinderella

Inexpensive but good quality cleaner. The only downside is the pungent smell. Remember to use personal protective equipment when handling plumbing. Spray the product evenly. We wait no more than seven minutes and rinse thoroughly with running water. We wipe dry with napkins. Cinderella It is also used for cleaning other bathroom items.

Chister

A versatile tool will tidy up the entire bathroom. It is used for gentle cleaning of a delicate coating from stains, grease, lime and corrosive compounds. The presence of an acrylic polymer in the composition protects the surface of the bathtub from contamination for a long time, giving shine to objects.

Frosch "Green grapes"

An excellent tool will please the hostesses with a gentle solution and a pleasant smell. It is used as a cleaner for acrylic coating and enamelware. Frosch is bought by connoisseurs of environmental cleanliness. The composition of the product is safe for people and pets. There is a minus - it does not cope with persistent stubborn stains.

Hostesses are concerned about the possibility of using Domestos, which gained popularity due to its ability to cope with complex pollution and blockages (see also -).

You can use Domestos, but with caution. The composition contains acids that corrode even the glassy coating. Pour the product on the top of the acrylic wall. Using a soft sponge, distribute Domestos evenly over the walls of the container. Waiting time - no more than 10 minutes! We go over the sponge again and rinse thoroughly with running water.

If there is an opportunity to use another remedy, it is better to exclude Domestos!

How to get rid of yellowness and limescale

Yellowness on the delicate surface of sanitary ware is associated with the formation of lime or the so-called water stone. Complex deposits appear from the interaction of the coating with water of a specific structure.

You can get rid of yellow plaque using professional tools, for example, Acrylan or Team Pro. Simplifying the task, we will prepare a cleaning acid solution ourselves.

Pour one or two liters of low concentration acetic or citric acid into the bath. Spread over the surface and leave for twelve hours. We rinse the plumbing with running water under strong pressure. Dry the surface with a dry cloth.

The acid procedure will protect the acrylic bathtub from complex plaque for a whole year!

Folk remedies

We will prepare cleaning solutions with our own hands.

Weak pollution we clean toothpaste. Apply the product to the dirt, rub it with a soft-bristled toothbrush. Rinse off with water and dry.

Stains and stains are removed baking soda, mixed with liquid soap. Apply the mixture to the contaminated areas, wait twenty minutes. Rinse and dry.

In the fight against limescale and rust the solution will go ammonia and hydrogen peroxide in equal proportions.

Get rid of light rust possible with the help baking soda. Prepare a mushy solution, apply to the coating. We wait twenty minutes. Wash off with water and dry.

old rust move away from saline solution. Apply table salt to the stain. We use the reverse side of the sponge, previously moistened with turpentine.

Complex pollution cleaned with 1-2 liters of weak concentration of acetic acid, poured into a full bath of hot water. We leave until the morning. Drain the vinegar solution and rinse the container.

As an alternative, we will use 200 grams of citric acid. The procedure is carried out in a similar way.

What can not be cleaned

During the cleaning process, you can not use:

• powdered products;
• solutions for surfaces from another material;
• products based on formaldehydes, alkalis, formic and phosphoric acids;
• chlorine-containing products.

Acrylic sanitary ware decorates the bathroom. Before you buy a luxurious bath, think about whether there is time to take care of it. Capricious material requires daily attention! Try not to experiment. Buy professional cleaners.