Firmware grand duos i9082. Installing official firmware on Samsung Galaxy Grand I9082

Before performing various actions on your device, we recommend that you read this article in full.

Manufacturers according to Google rules Android smartphones, must support their devices for at least a year and a half, that is, provide various minor updates, and most importantly, updates to operating systems. However, when the first year and a half ends, support for the device itself also ends. What to do in such a case? There is only one answer - to reflash the device. Just about how to reflash Samsung Galaxy Grand Duos (I9082), we'll talk.

Be sure to remember this!

When you reflash your smartphone, carefully follow all the steps of the firmware, which will be given below. In no case do not rush, this may end badly for your smartphone (you can get more information on this by clicking on this one). The smartphone must be charged at 100% until you charge it, do not start the flashing process. During flashing, all data from the SD card can be completely deleted, so keep this fact in mind and save all the files you need. In addition, be sure to check the condition of your USB cable so that it is not damaged. Also try to ensure that during the firmware, no one has access to the smartphone, because if the firmware process is interrupted, then it is likely that your smartphone will turn into a brick that will be completely useless. And don't forget that your smartphone must be rooted. You can find out how to obtain these rights by clicking on this.

When you reflash your smartphone, carefully follow all the steps of the firmware

You will need this

In order to flash your Samsung Galaxy Grand Duos (I9082), you will need: a downloaded and unpacked firmware file, a downloaded and installed Odin program, downloaded drivers, and finally, a USB cable with a personal computer.

Firmware process Samsung Galaxy Grand Duos (I9082)

1. Go to device settings and do full reset data.
2. We launch the Odin program.
3. Next, as shown in the first screenshot (highlighted in red), paste the files.
4. We connect the smartphone to the PC.
5. On the smartphone, we start the recovery mode (hold down the buttons - volume down + home + turn on).
6. Press the volume up keys, and then go to the Downloading Mode menu.
7. At this point, information about the connected smartphone begins to be displayed in the Odin window.
8. Click Start and do not touch anything.
9. Congratulations, your smartphone has been flashed.
10. We read additional information about the firmware of Android smartphones by clicking on this.

You can take the firmware itself and other files for the firmware

Samsung Galaxy Grand GT-I9082 is a branded smartphone running on Android 4.1. Here you will learn the characteristics, how to get root or reset the settings, and you can also download firmware (for Odin, for example) and instructions for Samsung.

Root Samsung Galaxy Grand GT-I9082

How to get root for Samsung Galaxy Grand GT-I9082 see instructions below.

If the applications did not help - ask in the topic or use complete list root utilities from the topic header.

Characteristics

1. Standard: GSM 900/1800/1900, 3G
2. Type: smartphone
3. Operating system: Android 4.1
4. Case type: classic
5. SAR level: 0.24
6. Number of SIM cards: 2
7. Multi-SIM Operation Mode: Alternate
8. Weight: 161g
9. Dimensions (WxHxD): 76.8x143.5x9.6mm
10. Screen type: color TFT, 16.78 million colors, touch
11. Touch screen type: multi-touch, capacitive
12. Diagonal: 5 inches.
13. Image size: 480x800
14. Number of pixels per inch (PPI): 187
15. Automatic screen rotation: yes
16. Type of ringtones: polyphonic, MP3 ringtones
17. Vibrating alert: yes
18. Camera: 8 megapixels, LED flash
19. Camera Features: Auto Focus
20. Video recording: yes
21. Max. video resolution: 1920x1080
22. Max. video frame rate: 30fps
23. Front camera: yes, 2 million pixels.
24. Audio: MP3, AAC, WAV, WMA, FM radio
25. Headphone Jack: 3.5mm
26. Interfaces: USB, Wi-Fi, Wi-Fi Direct, Bluetooth 4.0
27. USB charging: yes
28. Satellite navigation: GPS/GLONASS
29. A-GPS system: yes
30. Internet access: WAP, GPRS, EDGE, HSPA+, email POP/SMTP, email IMAP4, HTML
31. Processor: 1200 MHz
32. Number of processor cores: 2
33. Built-in memory: 8 GB
34. Volume random access memory: 1 GB
35. Memory card support: microSD (TransFlash), up to 64 GB
36. MMS: yes
37. Battery capacity: 2100 mAh
38. Talk time: 10:10 h:min
39. Standby time: 440 h
40. A2DP profile: yes
41. Sensors: light, proximity, gyroscope
42. Book search: yes
43. Organizer: alarm clock, calculator, task planner
44. Announce date (yymd): 2012-12-18

»

Firmware for Samsung Galaxy Grand GT-I9082

Android 4.1 official firmware [stock ROM file] -
Custom samsung firmware -

If custom or official firmware for Samsung has not yet been added here, then create a topic on the forum, in the section, our specialists will quickly and free of charge help, incl. with backup and manuals. Just do not forget to write a review about your smartphone - this is extremely important. Firmware for Samsung Galaxy Grand GT-I9082 will also appear on this page. Please note that this Samsung model requires an individual ROM file, so you should not try firmware files from other devices.

What are custom firmware (firmware)?

1. CM - CyanogenMod
2. lineageOS
3. paranoid android
4. OmniROM
5. Temasek's

1. AICP (Android Ice Cold Project)
2. RR (Resurrection Remix)
3. MK(MoKee)
4. flymeOS
5. Bliss
6. crDroid
7. Illusion ROMS
8. Pacman ROM

Problems and disadvantages of a Samsung smartphone and how to fix them?

• If the Galaxy Grand GT-I9082 does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification light only blinks at all (possibly after charging).
• If it freezes when updating / freezes when turned on (requires flashing, 100%)
• Not charging (usually, hardware problems)
• Can't see sim card
• The camera does not work (for the most part, hardware problems)
• Sensor not working (depending on the situation)

For all these problems, please contact (you just need to create a topic), specialists will help for free.

Hard Reset for Samsung Galaxy Grand GT-I9082

Instructions on how to make a Hard Reset on the Samsung Galaxy Grand GT-I9082 (factory reset). We recommend that you familiarize yourself with the visual guide, which is called on Android. .

Reset codes (open the dialer and enter them).

1. *2767*3855#
2. *#*#7780#*#*
3. *#*#7378423#*#*

Hard Reset via Recovery

1. Turn off the device-> go to Recovery
2. "wipe data/factory reset"
3. "yes - delete all user data" -> "Reboot System"

How to enter Recovery?

1. hold and hold Vol (-) [volume down], or Vol (+) [volume up] and the power button (Power)
2. a menu with the Android logo will appear. That's it, you are in Recovery!

Reset settings on Samsung Galaxy Grand GT-I9082 can be done in a very simple way:

1. Settings->Backup & Reset
2. Reset settings (at the very bottom)

How to reset pattern

How to reset graphic key if you have forgotten it and now you cannot unlock your Samsung smartphone. On the Galaxy Grand GT-I9082, the key or PIN can be removed in several ways. You can also remove the lock by resetting the settings, the lock code will be deleted and disabled.

1. Reset graph. blocking -
2. Password reset -

Instructions for installing the official single-file firmware on Samsung Galaxy Grand Duos (GT-I9082, GT-I9082L).

Drivers and programs

Attention!

To install the official stock firmware on the Galaxy Grand and return the phone state ("Settings" > "About device" > "Properties" > "Device status") to "Official" after switching from custom firmware and thereby return the ability to receive updates over the air is enough follow the instructions provided.

Installation instructions

Unzip the downloaded archive to a folder with Odin PC for convenience. The file in ".tar" or ".tar.md5" format must be left, but "SS_DL.dll" can be deleted.

Perform a data reset on the device.
To do this, go to the settings on the tab " Accounts » to the section « Archive and reset”, select the item “ Reset device” and press the button “ Delete everything". The phone will reboot.

Run Odin PC as administrator.

Put the device into download mode ( Download Mode).
To do this, simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

In this state, connect the smartphone to the computer. In Odin, the inscription " COM».

Click on the button " AP» and select the TAR archive of the firmware.

Items « Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition", if active - must be disabled.

Click on the button " start". The firmware installation process will begin.

At the end of the operation, if everything went well, the message “All threads completed. (succeed 1 / failed 0)". The phone must be rebooted manually by holding down the power button until the screen turns off. The initial boot of the device may take up to 5 minutes.
ATTENTION!
If the device does not boot for a long time or a data reset has not been done, it must be performed from the recovery.
To do this, simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading select " Wipe data/Factory reset", and then - " Reboot system now". If after these steps the device also freezes at boot, you need to reflash it again.

In this article, we will look at how to flash the Samsung GT-I9082 Galaxy Grand Duos.

To do this, we need the phone itself, a cable to connect to a computer, a firmware installation program and firmware files. They can be easily downloaded from the Internet.

In order to avoid any problems with the drivers on the bodies, I advise you to download and install Samsung Kies.

In our case, we will use the Odin3 v3.10 program. You can use other versions, but it is desirable that they be version 3.0 and higher.

One file firmware can be used if you just need to downgrade or upgrade the firmware.

IN difficult cases multi-file firmware is used. We will disassemble it.

The downloaded files look like this:

Let's go to our program. We add the necessary files.

To get started, click on "PIT".

A window opens where you need to specify the path to the file of our firmware. The file name must contain ".pit".

The same actions must be performed for the remaining buttons "BL", "AP", "CP", "CSC". Select the appropriate files for each of them, as shown in the figure:

This is how the program menu should look after loading all the files:

To do this, press the down arrow button on the volume control, the center button and the power button on it and hold them until we switch to boot mode.

When a warning appears, press the up arrow button on the volume control.

Everything, the phone is in boot mode. In this mode, you can see what firmware you currently have.

We connect the phone with a cable to the computer. The program should see that the bodies are connected. Click "Start".