To come in
Portal about the device of the sewerage and drainpipes
  • Centrifugal Pump Performance
  • Calibration of individual water meters
  • When to change the gas meter
  • Verification of meters and penalties for misuse
  • Verification and calibration of instruments and measuring instruments (SI)
  • Analysis and treatment of wastewater from suspended solids
  • Ways to purify water at home. A review of the methods and techniques for treating drinking water.

    Ways to purify water at home. A review of the methods and techniques for treating drinking water.

    Every year, the environmental situation in settlements is significantly deteriorating. Therefore, taking care of your health goes to one of the main places. You can take vitamins and go to the fitness club. But if at the same time you drink dirty water, then all efforts are futile. There are several ways to improve the quality of life and help restore your body. To do this, you need to know how to purify water at home.

    Most methods have been used for several millennia. Throughout the history of the development of society, people have been busy providing their homes with clean drinking water. Let's look at a few available methods that can be used in any place convenient for you.

    Water purification at home by the old-fashioned method

    For several millennia, the special disinfecting properties of copper have been known. Passing water through such a water supply system, the inhabitants of ancient Egypt and Rome had a clean drink, in which there were no pathogenic bacteria. But this substance also has negative qualities. Its compounds are very toxic. Therefore, storing water in a copper vessel is life threatening. Just four hours is enough to disinfect her. After this time, clean water should be poured into another tank.

    In Russia and India, water purification at home took place using silver plates or dishes. This method is still used by the Russian Orthodox Church to prepare holy water. A silver object dropped into a vessel will cleanse the liquid much faster and better than gaseous chlorine, carbolic acid and bleach. But the main plus is that the disinfecting effect of this liquid persists for several months.

    Of great interest to scientists was the method of disinfection used by herbalists and ancient healers. Water was purified using willow bark, bird cherry leaves, juniper branches and mountain ash. In this way, it is possible to purify even marsh water, relieving it of unpleasant taste and smell. To do this, you need to dial it into any container and hold the rowan branches in the vessel for about 2-3 hours.

    But the oldest way, which has been known since biblical times, involves the use of young dry white wine. Added to the water in 1/3 proportions, the drink cleans it no worse than a silver plate.

    Purification of water at home using modern methods

    One of the easiest ways to disinfect is to boil a liquid. But even such an easy procedure must be carried out correctly. It takes 5 to 10 minutes to kill 50% of the bacteria. If the process is completed within 30 minutes, 99% of pathogenic microorganisms will be destroyed. And only the anthrax virus will die after one hour of continuous boiling. Although this method is considered the most common, it also has a major drawback. Such a liquid contains a maximum concentration of heavy metals, salts and nitrates.

    Purification of water at home by evaporation is widely known and is a method for producing distilled liquid. Although it has no bacteria at all, consuming it for a long time can lead to negative consequences. It has the ability to flush useful trace elements and salts from the human body.

    One of the simplest and most effective ways to purify water can be considered freezing. This procedure is easy to carry out at home. And with a separate freezer, you can provide your family with clean water daily. It is enough to fill the jar with liquid. Then install it in the freezer. In the process of freezing, water molecules, turning into a crystal, displace all foreign impurities.

    It is necessary to wait until 2/3 of the total volume of liquid turns into ice. We take out a can and pour water, and transfer a piece of ice to another container and defrost. In this way we get clean water without impurities.

    Instruction manual

    Clean tap water possible by freezing. This method is suitable for small volumes of water, for example, when you need to clean several liters for cooking or hygiene procedures. Take a large pan (3-5l), fill it with two-thirds of the tap water, cover and put it in the freezer. After 12 hours, remove the pan, remove the ice, and drain the brine with impurities. Defrost the remaining ice on the bottom shelf of the refrigerator.

    To clean water  it is possible with the help of silver, which has bactericidal properties. In capacity with tap water  put silver coins or a silver spoon. Keep in mind that silver turns living water  with useful and not so elements to the dead, killing literally everything.

    You are lucky if there are several magnets at home - with their help you can quite easily clean water. Just attach the magnets to the water pipe - the magnetic field favorably affects water.

    The easiest way to filter water  at home - to give her a banal stand. Fill in water  in open containers, such as five-liter bottles, and leave for several hours. During this time, chlorine will evaporate.

    If you need to clean a small volume of water in a short time, use activated carbon. To clean one glass of water you will need one tablet of activated carbon. After 15 minutes water  need to strain. However, this method will not clear water  from bacteria, keep that in mind.

    From dirt water  can be cleaned with ordinary gauze, which is folded in several layers, and between the layers pour activated carbon powder. Please note that such filtering will not save bacteria and chemical compounds.

    Rid water  from harmful substances it is possible and with the help of silicon. It will take 2-3 pieces of silicon of dark brown color. Stones must be thoroughly washed and dried. Shake with a spoon water  in a pre-prepared clean container clockwise - this will clear it of negative energy and information. A small, but rather active whirlpool should form. Now put the silicon, cover the container with gauze and put in a bright place, but away from direct sunlight. After 2-3 days you can drink already peeled water. Moreover, in a week she will have healing properties.

    For water purification, use industrial developments, for example, special filters that are installed by specialists directly on the water pipe. Or use jug filters in which the water is cleaned for several hours. There are special nozzles mounted on a tap with water that clean the flow water.

    The importance of clean drinking water for the human body has been proven for a long time, since then a variety of filtration systems have become increasingly popular. In addition, many people are interested in how to purify water with improvised means. This is especially true in the case of insurance, if for some reason special devices do not cause trust or become worthless. And also such methods can significantly save money spent on all kinds of installations and cartridges.


    All that needs to be done is to choose the appropriate option for treating the fluid, or even several, and debug the system of its work to cover the needs of the whole family.

    Advantages and disadvantages of boiling, settling and freezing

    First of all, it is necessary to evaluate the simplest and most affordable methods by which cleaning is carried out. tap water. These are physical exposure options without the use of any filter, which have both obvious advantages and serious disadvantages:

    • Boiling. In the process of exposure to water from the tap with high temperature, the liquid is sterilized. The main advantage of the approach is the fact that the death of pathogenic microorganisms occurs. However, for the purification to really happen, the product must be boiled for at least 15 minutes with the lid open. Only then the harmful components will evaporate. It is worth considering that water becomes "dead", i.e. useless for the body, and nothing can be done about it. In addition, chlorine does not disappear anywhere, but only changes, turning into an even more dangerous compound for humans.


    • Upholding. Another simple approach, the use of which is convenient only if there are no time limits. Pour the liquid into the dishes and leave at least 8 hours. This water treatment at home allows you to get rid of chlorine and several other volatile chemical compounds. True, heavy metals remain in the liquid, although they settle to the bottom. To get rid of them, the water can not be chatted and stirred, and after insisting it must be carefully poured into other dishes, leaving at least a quarter of the product at the bottom.


    • Freezing Today, freezing water is considered one of the most effective among primitive physical methods. You need to do the following: pour water into a pot or plastic dish and put it in the freezer. Then the most difficult part begins - we make sure that only half of the liquid freezes. Then we drain the liquid part (all salts and harmful components remain in it), and melt the frozen part, and it becomes drinkable. Drinking such a product is recommended immediately, because It is considered healing. Therefore, you need to set a schedule when it is better to engage in freezing water.


    Tip: Today, highly chlorinated water flows from a water tap, which is considered safe for humans and supposedly can be used in everyday life. In fact, if it is used in its “pure” form, one may encounter digestive upsets, allergic reactions, the penetration of worms into the body and, paradoxically, dehydration.

    Choosing between boiling, settling and freezing, you need to consider that you can control the quality of the product only in the latter case, because water rich in mineral salts freezes very slowly. Therefore, the application of this approach in the absence of a high-quality filter is considered by specialists to be the most logical solution.

    Rules for the use of cleaning components

    A number of chemical compounds can be used as a cleaning filter. Most often, at home, water is purified by silicon, sodium chloride, shungite, activated carbon and silver. Methods of preparing drinking fluid in these cases are as follows:

    • The use of salt.  For 2 liters of tap water, take a tablespoon of salt and slide and dissolve. We insist on the product for 20 minutes, after which it can be consumed. With this kind of filter, the liquid can be made free from salts of heavy metals and pathogenic microorganisms. Unfortunately, such purification of tap water cannot be used too often, because


    • Purification by pharmaceutical silicon. The product is best purchased at the pharmacy, so as not to encounter additional problems later. First, the ingredient must be thoroughly washed under slightly warm running water. Then we put it in a container of water at the rate of 3 g of stone per 1 liter of liquid. The container with silicon must be covered with gauze and put away in a bright place, but away from direct sunlight. This filter will clean the water in about 2-3 days. To get the maximum benefit from the product, it must be drained into a new container, leaving at least 3 cm of sediment in the old one.


    •   Another stone with which people increasingly purify water. To make tap water drinkable, you need to place a stone weighing 100 g per liter of water and stand for three days, then drain, leaving a little product at the bottom. From time to time, such a natural filter needs to be cleaned with a hard sponge or replaced.


    •   A natural product not only purifies water, but also eliminates unpleasant odors, absorbs harmful substances that have fallen into the liquid from the surface of the pipes. You just need to wrap several tablets of the drug in gauze (1 piece per liter of liquid) and place in water for 8 hours.


    • Silver. Its properties are still used, because the component is much more effective than carbolic acid and bleach. In order to start water purification, you need to place a silver coin or spoon in a container with tap water and leave it for at least 10 hours.


    At home, if you want, you can make a real filter, but in terms of quality of work, it still can not surpass the described methods or industrial products.

    Simple and safe folk remedies

    Before you purify water at home using one of the folk remedies, you need to consider that their effectiveness will directly depend on the quality and environmental cleanliness of the components used.

    • Rowan. Just drop a bunch of berries in a container of water and wait a couple of hours. Such a natural filter purifies water no worse than activated carbon and silver.
    • Wine, vinegar. About how to purify water with wine, people knew thousands of years ago. You just need to take 300 ml of white wine (dry, young) per liter of water, mix and insist for at least 4 hours. For lack of this ingredient it is allowed to use vinegar. Only it needs to take no more than a teaspoon in the same volume.

    Experts warn that trying to quench your thirst with distilled water is not worth it. Even if this product does not contain harmful components, there is no benefit from it. But the regular use of such a liquid speeds up the process of removing vitamins and minerals from tissues, which is dangerous for the body. Well, the easiest way is to buy at least a simple jug with a filter that will not take up much space, will not cause trouble, and at the same time provide the family with clean drinking water.

    How to lose weight without harm to health?

    Why stubborn dieting DOES NOT bring a visible result, but only leads to frustration and depression, and how can you still lose weight in order to:

    • To return the attention of her husband or find a new man.
    • Once again feel the envious glances of friends and colleagues.
    • Believe in yourself, feel slender and desirable.
    • Feel free to go to the cinema or to the cafe with friends.
    • Do not be shy to post photos from your vacation or with children on social networks.

    Burn fat purposefully in problem areas

    Today everyone knows about the benefits of regular use of clean water for the human body. Despite the numerous stages of processing, ordinary tap liquid is more like a technical composition, so everyone should know how to purify the water on their own. It’s not always a matter of benefit - food prepared from a product without impurities tastes better and does not cause a negative reaction from the digestive system. The lucky owners of the filter are given practical advice  they don’t need to, they only need to change cartridges regularly. And for those who do not trust modern development or want to save money, you can try effective, but more affordable ways.

    Proven folk remedies for tap water treatment

    Such a direction as water purification at home was used by people several centuries ago. This was done for various reasons, but for one purpose - to make a quality and healthy drink out of an unsuitable liquid.


    • Using a mountain ash cluster. This method is no less effective than an activated carbon filter. You just need to put a bunch of ripe, pre-washed berries in a container with liquid and leave at least a couple of hours.
    • The use of other plant components. In some villages even today they purify the water with juniper branches, willow tree, onion husks and bird cherry leaves. Only in this case, the cleaning of tap water will take at least 12 hours.
    • Cleansing with pharmacy drugs. There are ways to sanitize water without changing its taste. Everyone can do this by adding iodine or vinegar to the liquid. In the first case, we take 3 drops of a 5% solution per liter of water. In the second - a teaspoon for the same amount. In both cases, you will have to wait a couple of hours before drinking water.
    • Wine purge. One of the most ancient options. In two parts of water we take one part of dry white wine, mix, insist 3-4 hours.

    Tip: It is recommended to use the above methods only in extreme cases, as Each approach has significant drawbacks. The use of plant components will not protect against a number of pathogenic microbes. Getting drinking water by diluting it with wine and pharmacy does not guarantee a pleasant taste, because to interrupt chlorine is very problematic.

    Effective and affordable methods that will help purify water from harmful impurities and make it potable


    Before you purify water at home, it is recommended to analyze it for the level of salts, microbes, trace elements. In some cases, forced unprofessional cleaning will only exacerbate the situation. If the analysis indicators are too negative, it is better not to risk it and install a special filter in the thickness of the crane.

    What can be done if the composition of the water does not threaten the state of health, but I want to raise its indicators:


    • Listing various methods of water purification, people first of all remember about boiling. Sterilization of a liquid by bringing it to high temperatures allows you to get rid of germs, viruses, and pathogenic sticks. But full purification occurs only if boiling lasts at least a quarter of an hour, with the lid of the container open. Do not forget about the negative aspects of the approach. Chlorine compounds do not disappear anywhere, they simply mutate. There will be no benefit from such water; it is empty. The concentration of salts in the liquid increases markedly.
    • Settling: A fairly effective technique that has specifics. Water is poured from the tap and left for at least 8 hours. Occasionally, it is necessary to stir the composition, not reaching the bottom, then the volatile chlorine will evaporate more intensively. To make this approach more effective, after the specified time, the liquid must be poured into a new container, leaving at least a quarter of the volume with harmful sediment.
    • Cleansing with salt. By the degree of purification of water from salts of heavy metals and harmful microorganisms, this option is comparable to installing a filter. Pour two liters of tap water, dilute in it a tablespoon of table salt (with a slide). After 15-30 minutes, you can drink the liquid. But drinking such a drink daily is highly discouraged.



    The listed methods can become a source of drinking water if a high-quality filter is not installed on the tap. The main thing is to prevent a common mistake - not to resort to obviously failing methods. For example, the use of miraculous magnets gives a rather dubious effect, and distilled water will not provide the body with the necessary substances.

    Excess weight is dangerous to health!

    Excess weight is not just an aesthetic problem, it is a health problem. Proven by doctors - every 10 kg. excess weight reduces a person’s life by 3-5 years. It is also proved that everyone can lose weight, they are only necessary ...

    Drinking water is necessary. But which water is better to drink? To begin with, the water that flows from the tap is not the most suitable for consumption. It is saturated with chlorine, harmful impurities of heavy metals, and may also contain viruses or microbes.

    There are different ways to purify tap water, consider the most affordable of them:

    • Boiling.This is the easiest and most affordable way, but at the same time the most unsafe. As a result of boiling tap water, chlorine passes into chloroform, nitrates into nitrites, all of these are dangerous carcinogens that cause cancer. Yes, microbes, bacteria will be destroyed during the boiling process, but not all. To kill most harmful microorganisms, you need to boil water for at least 10 minutes. Hepatitis A virus dies only after half an hour. Most boiling salts evaporate with boiling. After boiling, the water tastes unpleasant, dead.
    • Upholdingalso not the best option for purification: a small part of chlorine and some volatile substances will leave, but during this time the water, as they say, will bloom, it will also become unsafe to drink it.
    • Freezing or making melt water. Pure water freezes faster, and water containing heavy impurities slows down, this method of purification is based on this. Pour water into a saucepan and place in a freezer, preferably on plywood or a wooden board. Wait until the water freezes halfway, break the top layer of ice and drain the unfrozen water. Melt and drink the ice. Meltwater has many healing properties.
    • Activated Carbon Purification. A glass of water requires one tablet of coal. Holding time - no more than 15 minutes. Pharmaceutical coal can slightly purify water from organic impurities, chlorine, improve taste and smell. It is not capable of removing bacteria. It is impossible to boil water after such purification, when boiling activated carbon from dust, dioxins are formed, the products of the interaction of chlorine with organic matter under high temperature conditions are toxic to humans.
    • Purification of water using a home filter.The method is more costly and does not exclude fakes. If you use filters, the main condition is to change them more often. The dirt that accumulates inside the filter layers is washed away over time, and drinking such “purified” water becomes even more dangerous. In addition, most modern filters use activated carbon, which, as studies have shown, in combination with chlorine is extremely dangerous when boiled. Alternatively, you can use filters from shungite, or purify the water yourself.
    • Cleansing with shungite.Shungite is a mineral, a type of carbon. It has excellent cleansing and healing properties. The water infused with shungite is pure and healthy. Method of purification: filtered water is poured into a container, a shungite product is placed in it in the following proportion: 100 grams of mineral per 1 liter of water. Such water is purified in half an hour, and acquires healing properties in 2-3 days. The smaller the piece of mineral, the faster the cleansing process; shungite chips will cleanse the water in 10 minutes. Such water can be used for general healing of the body. Treatment should be carried out in consultation with a doctor familiar with the action of the mineral.
    • Purification with silver.It is known that silver has cleaning and disinfecting properties, but you need to be careful with the dosage, silver is also toxic and heavy metal, and prolonged exposure to silver in water can be harmful to health, as well as placing too large silver objects in the water.


    Bottled water

    Bottled water is also not the best option.. The interaction of water with the material of the bottle, long storage in warehouses, transportation, all these factors destroy useful properties and make water just technical. All the negativity of a big city is accumulated in such water by information pollution, which causes no less harm than chemical. And then, there is no guarantee that this water was not poured from the water supply, which, unfortunately, is often done.

    Conclusion

    The most useful water is water purified by nature itself.This is water from underground sources. Water that flows naturally - the way it wants to flow: rotating clockwise in the Northern Hemisphere or counterclockwise in the Southern. While spinning, the flow of water acquires an additional charged electron. The direction of water through pipes under pressure deprives the water of this electron and makes it inferior, unstructured, or simply dead.

    Thus, the most effective methods of water purification in a city are distillation, or thawing.(By the way, this method removes both chemical and informational pollution). As well as insisting on shungite, silicon.

    By the way, structured water is rare in nature, because its structure is extremely unstable. You can revive it with the help of an electroactivator.